CAD-Mesh3D v0.006 Perl 5 v5.28.3 i386-freebsd-thread-multi-64int
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
CAD-Mesh3D v0.006
- Platform
- Perl 5 v5.28.3 i386-freebsd-thread-multi-64int
- Date
- 2021-11-28 02:39:25
- ID
- 66d24f9a-4ff4-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PETERCJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9912. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/rel/perl-5.28.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-use.t .......... ok
t/10-initialize.t ... ok
t/20-math.t ......... ok
t/40-format.t ....... ok
t/99-fault.t ........ ok
t/formatstl_load.t .. skipped: Tests not needed except on Windows, and dont work on FreeBSD
t/formatstl_save.t .. skipped: Tests not needed except on Windows, and dont work on FreeBSD
t/STL-inputStl.t .... ok
t/STL-outputStl.t ... ok
t/STL-patched.t ..... ok
# Failed test 'Verify CAD::Mesh3D::STL chose STL_FORMATTER = CAD::Mesh3D::FormatSTL'
# at t/STL-unpatched.t line 20.
# got: 'CAD::Format::STL'
# expected: 'CAD::Mesh3D::FormatSTL'
# Looks like you failed 1 test of 14.
t/STL-unpatched.t ...
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/14 subtests
Test Summary Report
-------------------
t/STL-unpatched.t (Wstat: 256 Tests: 14 Failed: 1)
Failed test: 2
Non-zero exit status: 1
Files=11, Tests=319, 5 wallclock secs ( 0.38 usr 0.05 sys + 3.80 cusr 1.18 csys = 5.41 CPU)
Result: FAIL
Failed 1/11 test programs. 1/319 subtests failed.
*** Error code 1
Stop.
make: stopped in /usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CAD::Format::STL v0.2.1 v0.2.1
Carp 1.50 0
Exporter 5.73 5.57
ExtUtils::MakeMaker 7.62 0
Math::Vector::Real 0.18 0.18
Test::Exception 0.43 0
Test::More 1.302187 0.86
constant 1.33 0
strict 1.11 0
warnings 1.42 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9912
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.39
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302187
Test::Harness 3.42
Test::More 1.302187
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5:/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 52332
PERL5_CPANPLUS_IS_VERSION = 0.9912
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/rel/conf/perl-5.28.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/XqPWl5RKdy
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/XqPWl5RKdy"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/XqPWl5RKdy
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/rel/perl-5.28.3/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 28 subversion 3) configuration:
Platform:
osname=freebsd
osvers=13.0-release
archname=i386-freebsd-thread-multi-64int
uname='freebsd fiat 13.0-release freebsd 13.0-release #0 releng13.0-n244733-ea31abc261f: fri apr 9 04:04:45 utc 2021 root@releng1.nyi.freebsd.org:usrobjusrsrci386.i386sysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/rel/perl-5.28.3 -Dusethreads -Duse64bitint'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
optimize='-O2'
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='FreeBSD Clang 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)'
gccosandvers=''
intsize=4
longsize=4
ptrsize=4
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=12
longdblkind=3
ivtype='long long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=4
prototype=define
Linker and Libraries:
ld='cc'
ldflags ='-pthread -Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/lib/clang/11.0.1/lib /usr/lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil
perllibs=-lpthread -ldl -lm -lcrypt -lutil
libc=
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags=' '
cccdlflags='-DPIC -fPIC'
lddlflags='-shared -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Apr 19 2021 12:14:16
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5:/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="52332"
PERL5_CPANPLUS_IS_VERSION="0.9912"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/rel/conf/perl-5.28.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/XqPWl5RKdy"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/XqPWl5RKdy""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/XqPWl5RKdy"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5/5.28.3/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5/5.28.3
/usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/jail/XqPWl5RKdy/lib/perl5
/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/lib
/usr/home/cpan/pit/rel/conf/perl-5.28.3/.cpanplus/5.28.3/build/R7dmCy8kWN/CAD-Mesh3D-0.006/blib/arch
/usr/home/cpan/pit/rel/perl-5.28.3/lib/site_perl/5.28.3/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.28.3/lib/site_perl/5.28.3
/usr/home/cpan/pit/rel/perl-5.28.3/lib/5.28.3/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.28.3/lib/5.28.3