Report for UAV-Pilot-ARDrone-1.1

Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA UAV-Pilot-ARDrone-1.1 v5.8.8 GNU/Linux
Date: 2017-08-11T11:29:56Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--
Dear Timm Murray,

This is a computer-generated report for UAV-Pilot-ARDrone-1.1
on perl 5.8.8, created by CPAN-Reporter-1.2018.

Thank you for uploading your work to CPAN.  While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl.  Nevertheless, any
diagnostic output produced is provided below for reference.  If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

Skip blib/lib/auto/share/dist/UAV-Pilot-ARDrone/typeone.ttf (unchanged)
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.14.0 required--this is only v5.8.8, stopped at t/001_load.t line 25.
BEGIN failed--compilation aborted at t/001_load.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/001_load.t ................. 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests 
t/002_pod.t .................. ok
Perl v5.14.0 required--this is only v5.8.8, stopped at t/010_driver_mock.t line 25.
BEGIN failed--compilation aborted at t/010_driver_mock.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/010_driver_mock.t .......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 41/41 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/020_nav_packet.t line 25.
BEGIN failed--compilation aborted at t/020_nav_packet.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/020_nav_packet.t ........... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/100_control_ardrone.t line 25.
BEGIN failed--compilation aborted at t/100_control_ardrone.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/100_control_ardrone.t ...... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 61/61 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/110_event_loop.t line 25.
BEGIN failed--compilation aborted at t/110_event_loop.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/110_event_loop.t ........... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/120_event_loop_controls.t line 25.
BEGIN failed--compilation aborted at t/120_event_loop_controls.t line 25.
t/120_event_loop_controls.t .. 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/150_video_pave.t line 25.
BEGIN failed--compilation aborted at t/150_video_pave.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/150_video_pave.t ........... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/152_video_pave_fh.t line 25.
BEGIN failed--compilation aborted at t/152_video_pave_fh.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/152_video_pave_fh.t ........ 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/155_video_pave_bad.t line 25.
BEGIN failed--compilation aborted at t/155_video_pave_bad.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/155_video_pave_bad.t ....... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/160_video_decode.t line 25.
BEGIN failed--compilation aborted at t/160_video_decode.t line 25.
t/160_video_decode.t ......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/170_video_stream.t line 25.
BEGIN failed--compilation aborted at t/170_video_stream.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/170_video_stream.t ......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/175_video_fileno.t line 25.
BEGIN failed--compilation aborted at t/175_video_fileno.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/175_video_fileno.t ......... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/180_nav_processing.t line 25.
BEGIN failed--compilation aborted at t/180_nav_processing.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/180_nav_processing.t ....... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at /tmp/loop_over_bdir-6076-QeJ1eL/UAV-Pilot-ARDrone-1.1-0/blib/lib/UAV/Pilot/ARDrone/Driver/Mock.pm line 26.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-6076-QeJ1eL/UAV-Pilot-ARDrone-1.1-0/blib/lib/UAV/Pilot/ARDrone/Driver/Mock.pm line 26.
Compilation failed in require at t/190_control_nav_event.t line 26.
BEGIN failed--compilation aborted at t/190_control_nav_event.t line 26.
# Looks like your test exited with 9 before it could output anything.
t/190_control_nav_event.t .... 
Dubious, test returned 9 (wstat 2304, 0x900)
Failed 2/2 subtests 
Perl v5.14.0 required--this is only v5.8.8, stopped at t/210_commands_ardrone.t line 25.
BEGIN failed--compilation aborted at t/210_commands_ardrone.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/210_commands_ardrone.t ..... 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 58/58 subtests 

Test Summary Report
-------------------
t/001_load.t               (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 12 tests but ran 0.
t/010_driver_mock.t        (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 41 tests but ran 0.
t/020_nav_packet.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 12 tests but ran 0.
t/100_control_ardrone.t    (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 61 tests but ran 0.
t/110_event_loop.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 0.
t/120_event_loop_controls.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/150_video_pave.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 6 tests but ran 0.
t/152_video_pave_fh.t      (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 4 tests but ran 0.
t/155_video_pave_bad.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/160_video_decode.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
t/170_video_stream.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 0.
t/175_video_fileno.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 0.
t/180_nav_processing.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 6 tests but ran 0.
t/190_control_nav_event.t  (Wstat: 2304 Tests: 0 Failed: 0)
  Non-zero exit status: 9
  Parse errors: Bad plan.  You planned 2 tests but ran 0.
t/210_commands_ardrone.t   (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 58 tests but ran 0.
Files=16, Tests=15,  4 wallclock secs ( 0.04 usr  0.08 sys +  0.67 cusr  0.18 csys =  0.97 CPU)
Result: FAIL
Failed 15/16 test programs. 0/15 subtests failed.
Makefile:938: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module                  Need Have    
    ----------------------- ---- --------
    AnyEvent                0    7.14    
  ! AnyEvent::ReadLine::Gnu 0    n/a     
    IO::Socket::Multicast   0    1.12    
    Math::Trig              0    1.23    
    Moose                   0    2.2006  
    MooseX::Event           0    v0.2.0  
    namespace::autoclean    0    0.28    
    String::CRC32           0    1.6     
    Test::More              0    1.302090
    Time::HiRes             0    1.9744  
  ! UAV::Pilot              1.1  n/a     

build_requires:

    Module                  Need Have    
    ----------------------- ---- --------
    ExtUtils::MakeMaker     0    7.31_01 
    Test::Pod               0    1.51    

configure_requires:

    Module                  Need Have    
    ----------------------- ---- --------
    ExtUtils::MakeMaker     0    7.31_01 
    File::ShareDir::Install 0.06 0.11    


------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 6085
    PERL5_CPAN_IS_RUNNING = 6085
    PERL_CANARY_STABILITY_NOPROMPT = 1
    PERL_MM_USE_DEFAULT = 1
    PERL_USE_UNSAFE_INC = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have    
    ------------------- --------
    CPAN                2.18    
    CPAN::Meta          2.150010
    Cwd                 3.62    
    ExtUtils::CBuilder  0.280224
    ExtUtils::Command   7.31_01 
    ExtUtils::Install   2.14    
    ExtUtils::MakeMaker 7.31_01 
    ExtUtils::Manifest  1.70    
    ExtUtils::ParseXS   3.30    
    File::Spec          3.62    
    JSON                2.90    
    JSON::PP            2.94    
    Module::Build       0.4224  
    Module::Signature   0.81    
    Parse::CPAN::Meta   1.4422  
    Test::Harness       3.40_01 
    Test::More          1.302090
    YAML                1.23    
    YAML::Syck          1.30    
    version             0.9918  


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=4.9.0-2-amd64, archname=x86_64-linux
    uname='linux k93msid 4.9.0-2-amd64 #1 smp debian 4.9.18-1 (2017-03-30) x86_64 gnulinux '
    config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Uuselongdouble -DDEBUGGING=-g'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='6.3.0 20170406', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
    libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
    perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
    libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.24'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'


Characteristics of this binary (from libperl): 
  Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
                        USE_LARGE_FILES USE_PERLIO
  Built under linux
  Compiled at Apr 17 2017 10:26:05
  %ENV:
    PERL5LIB=""
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="6085"
    PERL5_CPAN_IS_RUNNING="6085"
    PERL_CANARY_STABILITY_NOPROMPT="1"
    PERL_MM_USE_DEFAULT="1"
    PERL_USE_UNSAFE_INC="1"
  @INC:
    /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/lib/5.8.8/x86_64-linux
    /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/lib/5.8.8
    /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/lib/site_perl/5.8.8/x86_64-linux
    /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/lib/site_perl/5.8.8
    /home/sand/src/perl/repoperls/installed-perls/host/k93msid/perl-5.8.8/89ad/lib/site_perl
    .