Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL AnyEvent-SIP-0.002 v5.16.0 FreeBSD
Date: 2013-05-01T15:33:00Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear XSAWYERX,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9136. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00-compile.t .......................... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite-anyevent.t ....... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite.t ................ ok
t/03_forward_stateless.t ................ ok
# UAS on 127.0.0.1:59189
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 100/100 packets
t/04_call_with_rtp.t .................... ok
# UAS on 127.0.0.1:38810
# UAC on 127.0.0.1:41300
# PROXY on 127.0.0.1:18049 127.0.0.1:58342
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:18049 REQ(INVITE) SDP: audio=127.0.0.1:2710/2
# <<
# proxy >> I< 127.0.0.1:41300 REQ(INVITE) SDP: audio=127.0.0.1:2710/2
# O> udp:127.0.0.1:38810 REQ(INVITE) SDP: audio=127.0.0.1:2710/2
# I< 127.0.0.1:38810 RSP(INVITE,100) NO SDP
# O> 127.0.0.1:41300 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:38810 RSP(INVITE,200) SDP: audio=127.0.0.1:11410/2
# O> 127.0.0.1:41300 RSP(INVITE,200) SDP: audio=127.0.0.1:11410/2
# I< 127.0.0.1:41300 REQ(ACK) NO SDP
# O> udp:127.0.0.1:38810 REQ(ACK) NO SDP
# <<
# uas >> I< 127.0.0.1:58342 REQ(INVITE) SDP: audio=127.0.0.1:2710/2
# O> 127.0.0.1:58342 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:58342;branch=z9hG4bKf2f36fee0490f9e2581a9d28f6d6fa6cf315641bf1c9429bd99769a1bf622d55
# Record-route: <sip:127.0.0.1:58342;lr>
# Via: SIP/2.0/UDP 127.0.0.1:18049;branch=z9hG4bK583d83afcbd071b9100cba28a99795eff315641bf1c9429bd99769a1bf622d55
# Record-route: <sip:127.0.0.1:18049;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:41300;branch=z9hG4bK5a2835bbe68b14a3829025e320e01f1bf315641bf1c9429bd99769a1bf622d55
# Call-id: 882af4dcfd43b1369d6d0a7eee19c1e9
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=8b22574607a82601758656cde9bb1f8b
# Content-type: application/sdp
# Content-length: 171
# Max-forwards: 69
# Contact: sip:r590419145702780551554f091b534b035f5555505356287531727136@127.0.0.1:58342
# To: you.uas@example.com;tag=18ddda729ed3146a62f52115a2325e04
#
# v=0
# o=anonymous 1367422305 1367422305 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 2710 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:58342 RSP(INVITE,200) SDP: audio=127.0.0.1:11410/2
# I< 127.0.0.1:58342 REQ(ACK) NO SDP
# call established
# <<
# uac >> I< 127.0.0.1:18049 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:18049 RSP(INVITE,200) SDP: audio=127.0.0.1:11410/2
# O> 127.0.0.1:18049 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:58342 REQ(BYE) NO SDP
# <<
# uas >> O> 127.0.0.1:58342 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:18049 REQ(BYE) NO SDP
# I< 127.0.0.1:18049 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:18049 REQ(INVITE) SDP: audio=127.0.0.1:9296/2
# <<
# proxy >> I< 127.0.0.1:41300 REQ(INVITE) SDP: audio=127.0.0.1:9296/2
# O> udp:127.0.0.1:38810 REQ(INVITE) SDP: audio=127.0.0.1:3118/2
# I< 127.0.0.1:38810 RSP(INVITE,100) NO SDP
# O> 127.0.0.1:41300 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:38810 RSP(INVITE,200) SDP: audio=127.0.0.1:6510/2
# O> 127.0.0.1:41300 RSP(INVITE,200) SDP: audio=127.0.0.1:2448/2
# <<
# uas >> I< 127.0.0.1:58342 REQ(INVITE) SDP: audio=127.0.0.1:3118/2
# O> 127.0.0.1:58342 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:58342;branch=z9hG4bKf2f36fee0490f9e2581a9d28f6d6fa6c7b23802e9177b20dee415c07ada92513
# Record-route: <sip:127.0.0.1:58342;lr>
# Via: SIP/2.0/UDP 127.0.0.1:18049;branch=z9hG4bK583d83afcbd071b9100cba28a99795ef7b23802e9177b20dee415c07ada92513
# Record-route: <sip:127.0.0.1:18049;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:41300;branch=z9hG4bK5a2835bbe68b14a3829025e320e01f1b7b23802e9177b20dee415c07ada92513
# Call-id: b52f73e0fc486698ecd42f44f1da67d5
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=a5f7c36416db2b672e2d7417c3fc86e1
# Content-type: application/sdp
# Content-length: 171
# Max-forwards: 69
# Contact: sip:r590419145702780551554f091b534b035f5555505356287531727136@127.0.0.1:58342
# To: you.uas@example.com;tag=e64c0cfbbadc599a56763df7c69df515
#
# v=0
# o=anonymous 1367422307 1367422307 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 3118 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:58342 RSP(INVITE,200) SDP: audio=127.0.0.1:6510/2
# I< 127.0.0.1:58342 REQ(ACK) NO SDP
# call established
# <<
# uac >> I< 127.0.0.1:18049 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:18049 RSP(INVITE,200) SDP: audio=127.0.0.1:2448/2
# O> 127.0.0.1:18049 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:58342 REQ(BYE) NO SDP
# O> 127.0.0.1:58342 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:18049 REQ(BYE) NO SDP
# I< 127.0.0.1:18049 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# nathelper >> OK
# <<
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# O> udp:127.0.0.1:18049 REQ(INVITE) SDP: audio=127.0.0.1:7494/2
# <<
# proxy >> I< 127.0.0.1:41300 REQ(INVITE) SDP: audio=127.0.0.1:7494/2
# O> udp:127.0.0.1:38810 REQ(INVITE) SDP: audio=127.0.0.1:5432/2
# I< 127.0.0.1:38810 RSP(INVITE,100) NO SDP
# O> 127.0.0.1:41300 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:38810 RSP(INVITE,200) SDP: audio=127.0.0.1:11578/2
# O> 127.0.0.1:41300 RSP(INVITE,200) SDP: audio=127.0.0.1:9206/2
# I< 127.0.0.1:41300 REQ(ACK) NO SDP
# O> udp:127.0.0.1:38810 REQ(ACK) NO SDP
# <<
# uas >> I< 127.0.0.1:58342 REQ(INVITE) SDP: audio=127.0.0.1:5432/2
# O> 127.0.0.1:58342 RSP(INVITE,100) NO SDP
# call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:58342;branch=z9hG4bKf2f36fee0490f9e2581a9d28f6d6fa6cc48f5a0df2db2d6020627ac47f6e9c95
# Record-route: <sip:127.0.0.1:58342;lr>
# Via: SIP/2.0/UDP 127.0.0.1:18049;branch=z9hG4bK583d83afcbd071b9100cba28a99795efc48f5a0df2db2d6020627ac47f6e9c95
# Record-route: <sip:127.0.0.1:18049;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:41300;branch=z9hG4bK5a2835bbe68b14a3829025e320e01f1bc48f5a0df2db2d6020627ac47f6e9c95
# Call-id: 68cb297d5be1428139968df39dab2cfd
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=b2204fdfc84e91c3871ecda485960272
# Content-type: application/sdp
# Content-length: 171
# Max-forwards: 69
# Contact: sip:r590419145702780551554f091b534b035f5555505356287531727136@127.0.0.1:58342
# To: you.uas@example.com;tag=5f621e0a7646e1e1eaef8b0e65167889
#
# v=0
# o=anonymous 1367422310 1367422310 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 5432 RTP/AVP 0
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:58342 RSP(INVITE,200) SDP: audio=127.0.0.1:11578/2
# I< 127.0.0.1:58342 REQ(ACK) NO SDP
# call established
# <<
# uac >> I< 127.0.0.1:18049 RSP(INVITE,100) NO SDP
# I< 127.0.0.1:18049 RSP(INVITE,200) SDP: audio=127.0.0.1:9206/2
# O> 127.0.0.1:18049 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:58342 REQ(BYE) NO SDP
# O> 127.0.0.1:58342 RSP(BYE,200) NO SDP
# call cleaned up
# <<
# uas >> received 100/100 packets
# <<
# uas >> RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:18049 REQ(BYE) NO SDP
# I< 127.0.0.1:18049 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
t/05_call_with_stateless_proxy.t ........ ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# Send BYE
# <<
# uas >> Got RTP
# <<
# uas >> Received BYE
# <<
# uac >> BYE done
# <<
t/06_call_with_reinvite.t ............... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# Send BYE
# <<
# uas >> Received BYE after 0 bytes read
# <<
# uac >> BYE done
# <<
t/07_call_on_hold.t ..................... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# Failed test '[uac] Registered 007 (REALM.example.com)'
# at ./t/testlib.pl line 156.
# Failed test 'fatal error at ./t/testlib.pl line 157.
# '
# at ./t/testlib.pl line 26.
# Looks like you failed 2 tests of 7.
# Looks like your test exited with 1 just after 7.
t/08_register_with_auth.t ...............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 2/7 subtests
t/11_invite_timeout.t ................... ok
# call established
# call cleaned up
t/12_maddr.t ............................ ok
t/13_maddr_proxy.t ...................... ok
# UAS on 127.0.0.1:5062
# UAC on 127.0.0.1:5060
# PROXY on 127.0.0.1:5063
# proxy >> OK
# <<
# proxy >> Listening
# <<
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# Failed test '[uas] Call accepted'
# at ./t/testlib.pl line 156.
# Failed test 'fatal error at ./t/testlib.pl line 157.
# '
# at ./t/testlib.pl line 26.
# Looks like you planned 12 tests but ran 8.
# Looks like you failed 2 tests of 8 run.
# Looks like your test exited with 1 just after 8.
t/14_bugfix_0.51.t ......................
Dubious, test returned 1 (wstat 256, 0x100)
Failed 6/12 subtests
t/15_block_invite.t ..................... ok
t/16_drop_invite.t ...................... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Starting ReInvite
# <<
# uas >> ReInvite accepted
# <<
# uac >> ReInvite done
# <<
# uac >> Send BYE
# <<
# uas >> Received BYE
# <<
# uac >> BYE done
# <<
t/17_call_with_reinvite_and_auth.t ...... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> got 401 response
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# Failed test '[uac] Registered 007 (REALM.example.com)'
# at ./t/testlib.pl line 156.
# Failed test 'fatal error at ./t/testlib.pl line 157.
# '
# at ./t/testlib.pl line 26.
# Looks like you failed 2 tests of 8.
# Looks like your test exited with 1 just after 8.
t/18_register_with_auth_step_by_step.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 2/8 subtests
# UAS on 127.0.0.1:37580
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 353/100 packets events=1 2 D # 3 4 B *
t/19_call_with_dtmf.t ................... ok
# call created
# got ringing
# call established
# call cleaned up
t/anyevent.t ............................ ok
t/release-pod-syntax.t .................. skipped: these tests are for release candidate testing
Test Summary Report
-------------------
t/08_register_with_auth.t (Wstat: 256 Tests: 7 Failed: 2)
Failed tests: 6-7
Non-zero exit status: 1
t/14_bugfix_0.51.t (Wstat: 256 Tests: 8 Failed: 2)
Failed tests: 7-8
Non-zero exit status: 1
Parse errors: Bad plan. You planned 12 tests but ran 8.
t/18_register_with_auth_step_by_step.t (Wstat: 256 Tests: 8 Failed: 2)
Failed tests: 7-8
Non-zero exit status: 1
Files=20, Tests=220, 82 wallclock secs ( 0.10 usr 0.05 sys + 36.87 cusr 3.62 csys = 40.63 CPU)
Result: FAIL
Failed 3/20 test programs. 6/220 subtests failed.
BEGIN failed--compilation aborted at -e line 1.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
AnyEvent 7.04 0
AnyEvent::AggressiveIdle 0.04 0
Cwd 3.40 0
Data::Dumper 2.135_06 0
Digest::MD5 2.51 0
File::Find 1.20 0
File::Temp 0.2301 0
IO::Socket 1.34 0
List::Util 1.23 0
Module::Build 0.4005 0.3601
Net::SIP 0.68 0
Net::SIP::Blocker 0 0
Net::SIP::Debug 0 0
Net::SIP::Dispatcher::Eventloop 0 0
Net::SIP::Dropper 0 0
Net::SIP::Dropper::ByField 0 0
Net::SIP::Dropper::ByIPPort 0 0
Net::SIP::Leg 0 0
Net::SIP::NATHelper::Client 0 0
Net::SIP::NATHelper::Local 0 0
Net::SIP::NATHelper::Server 0 0
Net::SIP::ReceiveChain 0 0
Net::SIP::SDP 0 0
Net::SIP::Util 0 0
Test::More 0.98 0
base 2.18 0
fields 2.16 0
strict 1.07 0
warnings 1.13 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9136
CPANPLUS::Dist::Build 0.70
Cwd 3.40
ExtUtils::CBuilder 0.280206
ExtUtils::Command 1.17
ExtUtils::Install 1.58
ExtUtils::MakeMaker 6.66
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.40
Module::Build 0.4005
Pod::Parser 1.51
Pod::Simple 3.20
Test::Harness 3.26
Test::More 0.98
version 0.9902
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.86.
Powered by minismokebox version 0.56
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 97152
PERL5_CPANPLUS_IS_VERSION = 0.9136
PERL5_MINISMOKEBOX = 0.56
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr-clang/conf/perl-5.16.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr-clang/perl-5.16.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 16 subversion 0) configuration:
Platform:
osname=freebsd, osvers=9.1-release, archname=amd64-freebsd-thread-multi
uname='freebsd fremen 9.1-release freebsd 9.1-release #0 r243825: tue dec 4 09:23:10 utc 2012 root@farrell.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr-clang/perl-5.16.0 -Dusethreads -Dcc=clang'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='clang', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 3.1 ((branches/release_31 156863))', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='clang', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under freebsd
Compiled at Dec 20 2012 17:35:57
%ENV:
PERL5LIB=":/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/arch:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/lib:/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="97152"
PERL5_CPANPLUS_IS_VERSION="0.9136"
PERL5_MINISMOKEBOX="0.56"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-7.04/blib/arch
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-AggressiveIdle-0.04/blib/arch
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Digest-HMAC-1.03/blib/arch
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-DNS-0.72/blib/arch
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/Net-SIP-0.68/blib/arch
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/lib
/usr/home/cpan/pit/thr-clang/conf/perl-5.16.0/.cpanplus/5.16.0/build/AnyEvent-SIP-0.002/blib/arch
/usr/home/cpan/pit/thr-clang/perl-5.16.0/lib/site_perl/5.16.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr-clang/perl-5.16.0/lib/site_perl/5.16.0
/usr/home/cpan/pit/thr-clang/perl-5.16.0/lib/5.16.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr-clang/perl-5.16.0/lib/5.16.0
.