Report for HTTP-PublicKeyPins-0.08

Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL HTTP-PublicKeyPins-0.08 v5.18.4 NetBSD
Date: 2015-08-10T14:59:35Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear DDICK,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9154. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.18.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing HTTP::PublicKeyPins 0.08, Perl 5.018004, /home/cpan/pit/thr/perl-5.18.4/bin/perl
t/00-load.t ....... ok
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
unable to load certificate
140187574445732:error:0906D06C:PEM routines:PEM_read_bio:no start line:/usr/src/crypto/external/bsd/openssl/dist/crypto/pem/pem_lib.c:703:Expecting: TRUSTED CERTIFICATE
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
WARNING: can't open config file: /etc/openssl/openssl.cnf
Can't load '/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/arch/auto/Crypt/OpenSSL/X509/X509.so' for module Crypt::OpenSSL::X509: /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/arch/auto/Crypt/OpenSSL/X509/X509.so: Undefined PLT symbol "Perl_croak_nocontext" (symnum = 95) at /opt/perl-5.18.2/lib/5.18.2/amd64-netbsd/DynaLoader.pm line 190.
 at /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/lib/Crypt/OpenSSL/X509.pm line 91.
Compilation failed in require at lib/HTTP/PublicKeyPins.pm line 6.
BEGIN failed--compilation aborted at lib/HTTP/PublicKeyPins.pm line 6.
Compilation failed in require at bin/hpkp_pin_sha256 line 6.
BEGIN failed--compilation aborted at bin/hpkp_pin_sha256 line 6.
Can't locate object method "__X509_cleanup" via package "Crypt::OpenSSL::X509" at /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/lib/Crypt/OpenSSL/X509.pm line 95.
END failed--call queue aborted at bin/hpkp_pin_sha256 line 6.
Use of uninitialized value $pin in scalar chomp at t/01-pin.t line 32.
# Looks like you planned 28 tests but ran 27.
# Looks like your test exited with 255 just after 27.
t/01-pin.t ........ 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/28 subtests 
	(less 4 skipped subtests: 23 okay)
t/boilerplate.t ... ok
t/manifest.t ...... skipped: Author tests not required for installation
t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod.t ........... skipped: Test::Pod 1.22 required for testing POD

Test Summary Report
-------------------
t/01-pin.t      (Wstat: 65280 Tests: 27 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 28 tests but ran 27.
Files=6, Tests=31,  1 wallclock secs ( 0.04 usr  0.02 sys +  0.45 cusr  0.41 csys =  0.92 CPU)
Result: FAIL
Failed 1/6 test programs. 0/31 subtests failed.
*** Error code 255

Stop.
make: stopped in /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  Carp                               1.29        0
	  Convert::ASN1                      0.27        0
	  Crypt::OpenSSL::RSA                0.28        0
	  Crypt::OpenSSL::X509              1.806    1.803
	  Digest                             1.17        0
	  English                         1.06_01        0
	  Exporter                           5.68        0
	  FileHandle                         2.02        0
	  Getopt::Long                       2.39        0
	  MIME::Base64                       3.13        0
	  Pod::Usage                         1.61        0
	  Test::More                     1.001014        0
	  strict                             1.07        0
	  warnings                           1.18        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9154
	CPANPLUS::Dist::Build              0.78
	Cwd                                3.47
	ExtUtils::CBuilder             0.280223
	ExtUtils::Command                  1.17
	ExtUtils::Install                  2.04
	ExtUtils::MakeMaker                7.04
	ExtUtils::Manifest                 1.70
	ExtUtils::ParseXS                  3.24
	File::Spec                         3.47
	Module::Build                    0.4214
	Pod::Parser                        1.60
	Pod::Simple                        3.28
	Test::Harness                      3.35
	Test::More                     1.001014
	version                          0.9912

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 18921
    PERL5_CPANPLUS_IS_VERSION = 0.9154
    PERL5_MINISMOKEBOX = 0.58
    PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.18.4
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/pit/thr/perl-5.18.4/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 18 subversion 4) configuration:
   
  Platform:
    osname=netbsd, osvers=6.1.4, archname=amd64-netbsd-thread-multi
    uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
    config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.18.4 -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
    ccversion='', gccversion='4.5.3', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
                        PERL_DONT_CREATE_GVSV
                        PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
                        PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
                        USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
                        USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
                        USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
                        USE_REENTRANT_API
  Built under netbsd
  Compiled at Nov 13 2014 13:42:15
  %ENV:
    PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/arch:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="18921"
    PERL5_CPANPLUS_IS_VERSION="0.9154"
    PERL5_MINISMOKEBOX="0.58"
    PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.18.4"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/lib
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Convert-ASN1-0.27/blib/arch
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/lib
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-Random-0.10/blib/arch
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/lib
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-RSA-0.28/blib/arch
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/lib
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/Crypt-OpenSSL-X509-1.806/blib/arch
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/lib
    /home/cpan/pit/thr/conf/perl-5.18.4/.cpanplus/5.18.4/build/HTTP-PublicKeyPins-0.08/blib/arch
    /home/cpan/pit/thr/perl-5.18.4/lib/site_perl/5.18.4/amd64-netbsd-thread-multi
    /home/cpan/pit/thr/perl-5.18.4/lib/site_perl/5.18.4
    /home/cpan/pit/thr/perl-5.18.4/lib/5.18.4/amd64-netbsd-thread-multi
    /home/cpan/pit/thr/perl-5.18.4/lib/5.18.4
    .