Module-Install-XSUtil v0.45 Perl 5 v5.20.2 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Module-Install-XSUtil v0.45
- Platform
- Perl 5 v5.20.2 x86_64-linux-thread-multi
- Date
- 2023-03-07 01:36:00
- ID
- 6a7f1888-bc88-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Goro Fuji,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.20.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Testing Module::Install::XSUtil/0.45
t/00_load.t .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.05 cusr 0.00 csys = 0.06 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
B::Hooks::OP::Annotation 0.44 0.43
Devel::PPPort 3.21 3.19
ExtUtils::MakeMaker 7.64 6.36
ExtUtils::ParseXS 3.44 2.21
Module::Install 1.19 0.91
Test::More 1.302191 0.88
XSLoader 0.24 0.1
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.62
Pod::Simple 3.28
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5:/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/lib:/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 1709798
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.20.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/fM4EpJ45Ye
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/fM4EpJ45Ye"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/fM4EpJ45Ye
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.20.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux-thread-multi
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.20.2 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.92
Built under linux
Compiled at Apr 27 2020 20:39:35
%ENV:
PERL5LIB="/home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5:/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/lib:/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="1709798"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.20.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/fM4EpJ45Ye"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/fM4EpJ45Ye""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/fM4EpJ45Ye"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5/5.20.2/x86_64-linux-thread-multi
/home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5/5.20.2
/home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/fM4EpJ45Ye/lib/perl5
/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/lib
/home/cpan/pit/thr/conf/perl-5.20.2/.cpanplus/5.20.2/build/DeNa4AABIJ/Module-Install-XSUtil-0.45/blib/arch
/home/cpan/pit/thr/perl-5.20.2/lib/site_perl/5.20.2/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.20.2/lib/site_perl/5.20.2
/home/cpan/pit/thr/perl-5.20.2/lib/5.20.2/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.20.2/lib/5.20.2
.