Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: NA UAV-Pilot-WumpusRover-0.4 v5.12.5 GNU/Linux
Date: 2015-07-21T02:01:36Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Timm Murray,
This is a computer-generated report for UAV-Pilot-WumpusRover-0.4
on perl 5.12.5, created by CPAN-Reporter-1.2014.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.14.0 required--this is only v5.12.5, stopped at t/001_load.t line 25.
BEGIN failed--compilation aborted at t/001_load.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/001_load.t ........................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 15/15 subtests
t/002_pod.t ......................... ok
Perl v5.14.0 required--this is only v5.12.5, stopped at /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib/UAV/Pilot/WumpusRover/PacketFactory.pm line 25.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib/UAV/Pilot/WumpusRover/PacketFactory.pm line 25.
Compilation failed in require at t/300_wumpus_rover_packet.t line 27.
BEGIN failed--compilation aborted at t/300_wumpus_rover_packet.t line 27.
# Looks like your test exited with 255 before it could output anything.
t/300_wumpus_rover_packet.t .........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 75/75 subtests
Perl v5.14.0 required--this is only v5.12.5, stopped at t/310_wumpus_rover_driver.t line 25.
BEGIN failed--compilation aborted at t/310_wumpus_rover_driver.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/310_wumpus_rover_driver.t .........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 14/14 subtests
Perl v5.14.0 required--this is only v5.12.5, stopped at t/320_wumpus_rover_video.t line 25.
BEGIN failed--compilation aborted at t/320_wumpus_rover_video.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/320_wumpus_rover_video.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
Can't locate UAV/Pilot/Control.pm in @INC (@INC contains: /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5 /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5 .) at t/330_wumpus_rover_control.t line 27.
BEGIN failed--compilation aborted at t/330_wumpus_rover_control.t line 27.
# Looks like your test exited with 2 before it could output anything.
t/330_wumpus_rover_control.t ........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 9/9 subtests
Can't locate UAV/Pilot/Control.pm in @INC (@INC contains: /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5 /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5 .) at t/340_wumpus_rover_control_event.t line 28.
BEGIN failed--compilation aborted at t/340_wumpus_rover_control_event.t line 28.
t/340_wumpus_rover_control_event.t ..
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Perl v5.14.0 required--this is only v5.12.5, stopped at /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib/UAV/Pilot/WumpusRover/Control.pm line 25.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-26996-RilxuX/UAV-Pilot-WumpusRover-0.4-IkjjUa/blib/lib/UAV/Pilot/WumpusRover/Control.pm line 25.
Compilation failed in require at t/350_wumpus_rover_commands.t line 27.
BEGIN failed--compilation aborted at t/350_wumpus_rover_commands.t line 27.
# Looks like your test exited with 255 before it could output anything.
t/350_wumpus_rover_commands.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
Perl v5.14.0 required--this is only v5.12.5, stopped at t/360_wumpus_rover_joystick.t line 25.
BEGIN failed--compilation aborted at t/360_wumpus_rover_joystick.t line 25.
t/360_wumpus_rover_joystick.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 15 tests but ran 0.
t/300_wumpus_rover_packet.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 75 tests but ran 0.
t/310_wumpus_rover_driver.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 14 tests but ran 0.
t/320_wumpus_rover_video.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 0.
t/330_wumpus_rover_control.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/340_wumpus_rover_control_event.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/350_wumpus_rover_commands.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/360_wumpus_rover_joystick.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=9, Tests=18, 1 wallclock secs ( 0.04 usr 0.05 sys + 0.21 cusr 0.07 csys = 0.37 CPU)
Result: FAIL
Failed 8/9 test programs. 0/18 subtests failed.
Makefile:848: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------------- ---- --------
AnyEvent 0 7.11
Digest::Adler32::XS 0 0.03
Moose 0 2.1501
MooseX::Event 0 v0.2.0
namespace::autoclean 0 0.26
Test::More 0 1.001014
Tie::IxHash 0 1.23
! UAV::Pilot 1.0 n/a
build_requires:
Module Need Have
-------------------- ---- --------
ExtUtils::MakeMaker 0 7.05_25
Test::Pod 0 1.51
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 26997
PERL5_CPAN_IS_RUNNING = 26997
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.10
CPAN::Meta 2.150005
Cwd 3.56_02
ExtUtils::CBuilder 0.280223
ExtUtils::Command 7.05_25
ExtUtils::Install 1.55
ExtUtils::MakeMaker 7.05_25
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.56_02
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4214
Module::Signature 0.79
Parse::CPAN::Meta 1.4417
Test::Harness 3.35
Test::More 1.001014
YAML 1.15
YAML::Syck 1.29
version 0.9912
--
Summary of my perl5 (revision 5 version 12 subversion 5) configuration:
Commit id: 9a9cbd715960a905dcbc9166349a73a64a007e4e
Platform:
osname=linux, osvers=4.0.0-2-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux k83 4.0.0-2-amd64 #1 smp debian 4.0.5-1 (2015-06-16) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.9.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Jun 30 2015 10:03:23
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="26997"
PERL5_CPAN_IS_RUNNING="26997"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/site_perl/5.12.5
/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.12.5/a2da/lib/5.12.5
.