Test2-Tools-xUnit v0.004 Perl 5 v5.8.9 amd64-netbsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Test2-Tools-xUnit v0.004
- Platform
- Perl 5 v5.8.9 amd64-netbsd
- Date
- 2018-03-24 20:53:47
- ID
- 72f68fa2-2fa5-11e8-9abe-a171f40b351c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear CVLIBRARY,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9172. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
# Failed test 'Events should contain two subtests then a plan'
# at t/attribute-after-each.t line 13.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 13 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Plan> | 11 |
# +------+-----------------------+------------------+-------+
Can't call method "subevents" on an undefined value at t/attribute-after-each.t line 16.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/attribute-after-each.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'Events should have two Ok events at start and end'
# at t/attribute-before-after-all.t line 15.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 15 |
# | [0] | <DOES NOT EXIST> | <EVENT: Ok> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Subtest> | 11 |
# | [3] | <DOES NOT EXIST> | <EVENT: Ok> | 12 |
# | [4] | <DOES NOT EXIST> | <EVENT: Plan> | 13 |
# +------+-----------------------+------------------+-------+
# Failed test 'BeforeAll'
# at t/attribute-before-after-all.t line 22.
# Caught exception in subtest: Can't call method "pass" on an undefined value at t/attribute-before-after-all.t line 19.
# Failed test 'AfterAll'
# at t/attribute-before-after-all.t line 29.
# Caught exception in subtest: Can't call method "pass" on an undefined value at t/attribute-before-after-all.t line 26.
# Seeded srand with seed '20180324' from local date.
t/attribute-before-after-all.t ..
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/3 subtests
# Failed test 'Events should contain two subtests then a plan'
# at t/attribute-before-each.t line 13.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 13 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Plan> | 11 |
# +------+-----------------------+------------------+-------+
Can't call method "subevents" on an undefined value at t/attribute-before-each.t line 16.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/attribute-before-each.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'Events should contain three skipped tests then a plan'
# at t/attribute-skip.t line 14.
# +------+-----------------------+---------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+---------------+-------+
# | | ARRAY(0x7f7ff6bc6320) | <ARRAY> | 8, 14 |
# | [0] | <DOES NOT EXIST> | <EVENT: Skip> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Skip> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Skip> | 11 |
# | [3] | <DOES NOT EXIST> | <EVENT: Plan> | 12 |
# +------+-----------------------+---------------+-------+
# Seeded srand with seed '20180324' from local date.
t/attribute-skip.t ..............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
# Failed test 'Events should contain one subtest then a plan'
# at t/attribute-test.t line 12.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bc6320) | <ARRAY> | 8, 12 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Plan> | 10 |
# +------+-----------------------+------------------+-------+
Can't call method "name" on an undefined value at t/attribute-test.t line 14.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/attribute-test.t ..............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'Events should contain four subtests then a plan'
# at t/attribute-todo.t line 15.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bc6320) | <ARRAY> | 8, 15 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Subtest> | 11 |
# | [3] | <DOES NOT EXIST> | <EVENT: Subtest> | 12 |
# | [4] | <DOES NOT EXIST> | <EVENT: Plan> | 13 |
# +------+-----------------------+------------------+-------+
# Failed test 'Failing Todo'
# at t/attribute-todo.t line 27.
# Caught exception in subtest: Can't call method "subevents" on an undefined value at t/attribute-todo.t line 18.
# Failed test 'With no Test attribute'
# at t/attribute-todo.t line 38.
# Caught exception in subtest: Can't call method "subevents" on an undefined value at t/attribute-todo.t line 30.
# Failed test 'With no reason'
# at t/attribute-todo.t line 51.
# Caught exception in subtest: Can't call method "subevents" on an undefined value at t/attribute-todo.t line 41.
# Failed test 'With reason'
# at t/attribute-todo.t line 64.
# Caught exception in subtest: Can't call method "subevents" on an undefined value at t/attribute-todo.t line 54.
# Seeded srand with seed '20180324' from local date.
t/attribute-todo.t ..............
Dubious, test returned 5 (wstat 1280, 0x500)
Failed 5/5 subtests
# Failed test 'unhandled-attribute.t should give expected compilation error'
# at t/attribute-unhandled.t line 6.
# +--------------------------------+----+--------------------------------+
# | GOT | OP | CHECK |
# +--------------------------------+----+--------------------------------+
# | syntax error at /home/cpan/pit | =~ | (?-xism:Invalid CODE attribute |
# | /bare/conf/perl-5.8.9/.cpanplu | | : Foo) |
# | s/5.8.9/build/eJbTccPKBy/Test2 | | |
# | -Tools-xUnit-0.004/blib/lib/Te | | |
# | st2/Tools/xUnit.pm line 1, nea | | |
# | r "package Test2::Tools::xUnit | | |
# | 0.004"\n | | |
# | Compilation failed in require | | |
# | at ./t/fixtures/unhandled-attr | | |
# | ibute.it line 1.\n | | |
# | BEGIN failed--compilation abor | | |
# | ted at ./t/fixtures/unhandled- | | |
# | attribute.it line 1.\n | | |
# +--------------------------------+----+--------------------------------+
# Seeded srand with seed '20180324' from local date.
t/attribute-unhandled.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/2 subtests
# Failed test 'Events should contain three subtests then a plan'
# at t/instance-lifecycle.t line 14.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 14 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Subtest> | 11 |
# | [3] | <DOES NOT EXIST> | <EVENT: Plan> | 12 |
# +------+-----------------------+------------------+-------+
Can't call method "subevents" on an undefined value at t/instance-lifecycle.t line 23.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/instance-lifecycle.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'Events should contain two subtests then a plan'
# at t/no-new-method.t line 13.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 13 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Plan> | 11 |
# +------+-----------------------+------------------+-------+
Can't call method "subevents" on an undefined value at t/no-new-method.t line 20.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/no-new-method.t ...............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
# Failed test 'Events should contain two subtests then a plan'
# at t/with-new-method.t line 13.
# +------+-----------------------+------------------+-------+
# | PATH | GOT | CHECK | LNs |
# +------+-----------------------+------------------+-------+
# | | ARRAY(0x7f7ff6bb1320) | <ARRAY> | 8, 13 |
# | [0] | <DOES NOT EXIST> | <EVENT: Subtest> | 9 |
# | [1] | <DOES NOT EXIST> | <EVENT: Subtest> | 10 |
# | [2] | <DOES NOT EXIST> | <EVENT: Plan> | 11 |
# +------+-----------------------+------------------+-------+
Can't call method "subevents" on an undefined value at t/with-new-method.t line 20.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 after test #1.
# Seeded srand with seed '20180324' from local date.
t/with-new-method.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/attribute-after-each.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/attribute-before-after-all.t (Wstat: 768 Tests: 3 Failed: 3)
Failed tests: 1-3
Non-zero exit status: 3
t/attribute-before-each.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/attribute-skip.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/attribute-test.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/attribute-todo.t (Wstat: 1280 Tests: 5 Failed: 5)
Failed tests: 1-5
Non-zero exit status: 5
t/attribute-unhandled.t (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
t/instance-lifecycle.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/no-new-method.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/with-new-method.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=10, Tests=17, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.86 cusr 0.44 csys = 1.36 CPU)
Result: FAIL
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
B 1.19 0
Test2::API 1.302133 0
Test2::V0 0.000111 0
Test2::Workflow 0.000111 0
Test2::Workflow::Runner 0.000111 0
Test2::Workflow::Task::Action 0.000111 0
strict 1.03 0
warnings 1.05_01 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9172
CPANPLUS::Dist::Build 0.88
Cwd 3.62
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.30
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.62
Module::Build 0.4224
Pod::Parser 1.35
Pod::Simple 3.28
Test2 1.302133
Test::Harness 3.39
Test::More 1.302133
version 0.9918
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.02.
Powered by minismokebox version 0.68
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 25242
PERL5_CPANPLUS_IS_VERSION = 0.9172
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=netbsd, osvers=6.1.4, archname=amd64-netbsd
uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.5.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
perllibs=-lm -lcrypt -lutil -lc -lposix
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under netbsd
Compiled at May 9 2014 12:12:26
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/arch:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="25242"
PERL5_CPANPLUS_IS_VERSION="0.9172"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/WaqCRNMZGn/ExtUtils-Config-0.008/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/OT8hLG75fs/ExtUtils-Helpers-0.026/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/9EnnD61iBn/ExtUtils-InstallPaths-0.011/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6wOTfaUHsg/Module-Build-Tiny-0.039/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/bfH0UyWLlx/Importer-0.025/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/I8lwNZXQsB/Scope-Guard-0.21/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/uusK_6o6Ep/Sub-Info-0.002/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/MJAbv0bW2f/Term-Table-0.012/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/ohHIsOT0aW/Test-Simple-1.302133/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/hvj3NW1h0T/Test2-Suite-0.000111/blib/arch
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/eJbTccPKBy/Test2-Tools-xUnit-0.004/blib/arch
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.