Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Class-DBI-DDL-1.01 v5.13.0 GNU/Linux
Date: 2011-05-29T05:49:44Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear HANENKAMP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9105. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun May 29 06:48:42 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/H/HA/HANENKAMP/Class-DBI-DDL/Class-DBI-DDL-1.01.tar.gz'
[MSG] [Sun May 29 06:48:42 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/H/HA/HANENKAMP/Class-DBI-DDL/CHECKSUMS'
[MSG] [Sun May 29 06:48:42 2011] Checksum matches for 'Class-DBI-DDL-1.01.tar.gz'
[MSG] [Sun May 29 06:48:42 2011] Extracted 'Class::DBI::DDL' to '/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01'
[MSG] [Sun May 29 06:48:42 2011] CPANPLUS is prefering Build.PL
[MSG] [Sun May 29 06:48:42 2011] Loading YACSmoke database "/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/cpansmoke.dat"
[MSG] [Sun May 29 06:48:42 2011] Checking if your kit is complete...
Looks good
Writing Makefile for Class::DBI::DDL
[MSG] [Sun May 29 06:48:42 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun May 29 06:48:42 2011] Checking for previous PASS result for "Class-DBI-DDL-1.01"
[MSG] [Sun May 29 06:48:43 2011] cp lib/Class/DBI/DDL/mysql.pm blib/lib/Class/DBI/DDL/mysql.pm
cp lib/Class/DBI/DDL/Pg.pm blib/lib/Class/DBI/DDL/Pg.pm
cp lib/Class/DBI/DDL.pm blib/lib/Class/DBI/DDL.pm
Manifying blib/man3/Class::DBI::DDL::mysql.3
Manifying blib/man3/Class::DBI::DDL::Pg.3
Manifying blib/man3/Class::DBI::DDL.3
[ERROR] [Sun May 29 06:48:43 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/pit/bare/perl-5.13.0/bin/perl5.13.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch /home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0/x86_64-linux /home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0 /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0/x86_64-linux /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0 .).
at /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9.
Compilation failed in require at (eval 5) line 2.
...propagated at /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0/base.pm line 94.
BEGIN failed--compilation aborted at t/mysql.t line 5.
t/mysql.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch /home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0/x86_64-linux /home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0 /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0/x86_64-linux /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0 .).
at /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9
BEGIN failed--compilation aborted at /home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9.
Compilation failed in require at (eval 5) line 2.
...propagated at /home/cpan/pit/bare/perl-5.13.0/lib/5.13.0/base.pm line 94.
BEGIN failed--compilation aborted at t/Pg.t line 5.
t/Pg.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Report
-------------------
t/mysql.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/Pg.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=2, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.03 cusr 0.00 csys = 0.05 CPU)
Result: FAIL
Failed 2/2 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sun May 29 06:48:43 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9105
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.5601
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.88
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.48
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US
LC_COLLATE = C
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/qt/bin:/usr/share/texmf/bin:.
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 4925
PERL5_CPANPLUS_IS_VERSION = 0.9105
PERL5_MINISMOKEBOX = 0.48
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.13.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.13.0/bin/perl5.13.0
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 13 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.33.4, archname=x86_64-linux
uname='linux slack64 2.6.33.4 #3 smp wed may 12 23:13:09 cdt 2010 x86_64 intel(r) xeon(r) cpu e5520 @ 2.27ghz genuineintel gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.13.0 -Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.4', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Feb 18 2011 10:03:21
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib:/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="4925"
PERL5_CPANPLUS_IS_VERSION="0.9105"
PERL5_MINISMOKEBOX="0.48"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.13.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/lib
/home/cpan/pit/bare/conf/perl-5.13.0/.cpanplus/5.13.0/build/Class-DBI-DDL-1.01/blib/arch
/home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0/x86_64-linux
/home/cpan/pit/bare/perl-5.13.0/lib/site_perl/5.13.0
/home/cpan/pit/bare/perl-5.13.0/lib/5.13.0/x86_64-linux
/home/cpan/pit/bare/perl-5.13.0/lib/5.13.0
.