MooX-Keyword-Chain v0.01 Perl 5 v5.18.3 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
MooX-Keyword-Chain v0.01
- Platform
- Perl 5 v5.18.3 x86_64-linux-thread-multi
- Date
- 2023-02-11 04:56:36
- ID
- 7690f4a2-a9c8-11ed-aba6-9a79f339625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear LNATION,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.18.3/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing MooX::Keyword::Chain 0.01, Perl 5.018003, /home/cpan/pit/thr/perl-5.18.3/bin/perl
t/00-load.t ....... ok
t/01-odea.t ....... ok
t/manifest.t ...... skipped: Author tests not required for installation
t/pod-coverage.t .. skipped: Author tests not required for installation
t/pod.t ........... skipped: Author tests not required for installation
All tests successful.
Files=5, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.32 cusr 0.06 csys = 0.41 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.64 0
Moo 2.005005 0
MooX::Keyword 0.04 0
Test::More 1.302191 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.60
Pod::Simple 3.28
Test2 1.302191
Test::Harness 3.44
Test::More 1.302191
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/WJRzz5WACz/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 26663
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.18.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/WJRzz5WACz
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/WJRzz5WACz"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/WJRzz5WACz
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.18.3/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 18 subversion 3) configuration:
Platform:
osname=linux, osvers=5.10.16-0-lts, archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.16-0-lts #1-alpine smp wed, 17 feb 2021 08:17:06 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.18.3 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector'
ccversion='', gccversion='10.2.1 20201203', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-ldl -lm -lcrypt -lutil -lpthread -lc
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 12 2021 18:37:27
%ENV:
PERL5LIB="/home/cpan/pit/jail/WJRzz5WACz/lib/perl5:/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/lib:/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="26663"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.18.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/WJRzz5WACz"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/WJRzz5WACz""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/WJRzz5WACz"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/WJRzz5WACz/lib/perl5/5.18.3/x86_64-linux-thread-multi
/home/cpan/pit/jail/WJRzz5WACz/lib/perl5/5.18.3
/home/cpan/pit/jail/WJRzz5WACz/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/WJRzz5WACz/lib/perl5
/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/lib
/home/cpan/pit/thr/conf/perl-5.18.3/.cpanplus/5.18.3/build/ycTLuu5EdD/MooX-Keyword-Chain-0.01/blib/arch
/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.18.3/lib/site_perl/5.18.3
/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.18.3/lib/5.18.3
.