Chess-ICClib v1.00 Perl 5 v5.12.0 i386-freebsd

Status
Fail
From
Chris Williams (BINGOS)
Dist
Chess-ICClib v1.00
Platform
Perl 5 v5.12.0 i386-freebsd
Date
2010-05-02 12:30:17
ID
7760c3c4-55e6-11df-b9ad-27818fbefd91
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear ROMM,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9003. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun May  2 13:30:15 2010] Using cached file '/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/authors/id/R/RO/ROMM/CHECKSUMS' on disk; ttl (3600s) is not exceeded
[MSG] [Sun May  2 13:30:15 2010] Checksum matches for 'Chess-ICClib-1.00.tar.gz'
[MSG] [Sun May  2 13:30:16 2010] Extracted 'Chess::ICClib' to '/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00'
[MSG] [Sun May  2 13:30:16 2010] CPANPLUS is prefering Build.PL
[MSG] [Sun May  2 13:30:16 2010] Loading YACSmoke database "/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/cpansmoke.dat"
[MSG] [Sun May  2 13:30:16 2010] Checking if your kit is complete...
Looks good
Writing Makefile for Chess::ICClib

[MSG] [Sun May  2 13:30:16 2010] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun May  2 13:30:16 2010] Checking for previous PASS result for "Chess-ICClib-1.00"
[MSG] [Sun May  2 13:30:17 2010] cp lib/Chess/ICClib.pm blib/lib/Chess/ICClib.pm
Manifying blib/man3/Chess::ICClib.3

[ERROR] [Sun May  2 13:30:17 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t

#   Failed test 'use Chess::ICClib;'
#   at t/Chess-ICClib.t line 9.
#     Tried to use 'Chess::ICClib'.
#     Error:  Can't locate Net/Telnet.pm in @INC (@INC contains: /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/arch /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/arch /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0 .) at /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib/Chess/ICClib.pm line 8.
# BEGIN failed--compilation aborted at /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib/Chess/ICClib.pm line 8.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Can't locate object method "new" via package "Chess::ICClib" at t/Chess-ICClib.t line 17.
# Looks like you planned 4 tests but ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test exited with 255 just after 1.
t/Chess-ICClib.t .. 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests 

Test Summary Report
-------------------
t/Chess-ICClib.t (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 4 tests but ran 1.
Files=1, Tests=1,  0 wallclock secs ( 0.05 usr  0.02 sys +  0.04 cusr  0.02 csys =  0.12 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
*** Error code 255

Stop in /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00.

[MSG] [Sun May  2 13:30:17 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Net::Telnet

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'ROMM (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Net::Telnet'	=> '0', # or a minimum working version
    }
);

Thanks! :-)


Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9003
	CPANPLUS::Dist::Build              0.46
	Cwd                                3.31
	ExtUtils::CBuilder               0.2703
	ExtUtils::Command                  1.16
	ExtUtils::Install                  1.55
	ExtUtils::MakeMaker                6.56
	ExtUtils::Manifest                 1.58
	ExtUtils::ParseXS                2.2205
	File::Spec                         3.31
	Module::Build                    0.3607
	Test::Harness                      3.21
	Test::More                         0.94
	version                            0.82

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.56.
Powered by minismokebox version 0.26

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 51444
    PERL5_CPANPLUS_IS_VERSION = 0.9003
    PERL5_MINISMOKEBOX = 0.26
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.12.0/
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/bare/perl-5.12.0/bin/perl
    UID:  $<  = 1003
    EUID: $>  = 1003
    GID:  $(  = 1003 1003 1003
    EGID: $)  = 1003 1003 1003


-------------------------------


--

Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
   
  Platform:
    osname=freebsd, osvers=7.2-release, archname=i386-freebsd
    uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
    config_args='-de -Dprefix=/usr/home/cpan/pit/bare/perl-5.12.0'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.2.1 20070719  [FreeBSD]', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E  -fstack-protector -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lgdbm -lm -lcrypt -lutil -lc
    perllibs=-lm -lcrypt -lutil -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
  Built under freebsd
  Compiled at Apr 25 2010 21:18:12
  %ENV:
    PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="51444"
    PERL5_CPANPLUS_IS_VERSION="0.9003"
    PERL5_MINISMOKEBOX="0.26"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.12.0/"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/lib
    /usr/home/cpan/pit/bare/conf/perl-5.12.0/.cpanplus/5.12.0/build/Chess-ICClib-1.00/blib/arch
    /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd
    /usr/home/cpan/pit/bare/perl-5.12.0/lib/site_perl/5.12.0
    /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0/i386-freebsd
    /usr/home/cpan/pit/bare/perl-5.12.0/lib/5.12.0
    .