DBIx-Class-Fixtures v1.001010 Perl 5 v5.8.9 x86_64-linux-thread-multi
- Status
- Pass
- From
- David Cantrell (DCANTRELL)
- Dist
-
DBIx-Class-Fixtures v1.001010
- Platform
- Perl 5 v5.8.9 x86_64-linux-thread-multi
- Date
- 2010-08-12 10:43:41
- ID
- 78bffdd0-a5fe-11df-b0ff-f4d1e71e7b5c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Luke Saunders,
This is a computer-generated report for DBIx-Class-Fixtures-1.001010
on perl 5.8.9, created by CPAN-Reporter-1.1711.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/david/cpantesting/perl-5.8.9/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
# Testing DBIx::Class::Fixtures 1.001010, Perl 5.008009, /home/david/cpantesting/perl-5.8.9/bin/perl
t/00-load.t ............. ok
t/01-new.t .............. ok
t/02-dump-basic.t ....... ok
t/03-dump-quantity.t .... ok
t/04-dump-fetch.t ....... ok
t/05-dump-rules.t ....... ok
t/06-dump-date.t ........ skipped: Set $ENV{FIXTURETEST_DSN}, _USER and _PASS to point at MySQL DB to run this test
t/07-dump-all.t ......... ok
t/08-dump-includes.t .... ok
t/09-dump-scalar-ref.t .. ok
t/10-dump-cleanup.t ..... ok
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
t/12-populate-basic.t ... ok
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
t/13populate-two-dbs.t .. ok
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
Dynamic schema detected, will run in 0.04006 mode.
Set the 'naming' attribute or the SCHEMA_LOADER_BACKCOMPAT environment variable
to disable this warning.
Also consider setting 'use_namespaces => 1' if/when upgrading.
See perldoc DBIx::Class::Schema::Loader::Manual::UpgradingFromV4 for more
details.
t/14-populate-post.t .... ok
All tests successful.
Files=14, Tests=125, 22 wallclock secs ( 0.13 usr 0.01 sys + 12.45 cusr 1.09 csys = 13.68 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
--------------------------- ------- -------
Class::Accessor::Grouped 0.06 0.09004
Config::Any 0.08 0.20
Data::Dump::Streamer 2.05 2.22
Data::Visitor 0.15 0.27
DateTime 0.41 0.61
DateTime::Format::MySQL 0 0.04
DateTime::Format::Pg 0 0.16005
DateTime::Format::SQLite 0.1 0.11
DBIx::Class 0.08102 0.08123
DBIx::Class::Schema::Loader 0.04006 0.07001
ExtUtils::MakeMaker 6.42 6.48
File::Copy::Recursive 0.35 0.38
Hash::Merge 0.1 0.12
JSON::Syck 0.26 0.35
Path::Class 0.16 0.19
Test::More 0.7 0.94
configure_requires:
Module Need Have
--------------------------- ------- -------
ExtUtils::MakeMaker 6.42 6.48
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 5978
PERL5_CPAN_IS_RUNNING = 5978
PERLVER = 5.8.9
PERL_INLINE_DIRECTORY = /home/david/.Inline-5.8.9
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/cpantesting/perl-5.8.9/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 1000
$EGID = 1000 1000
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.9402
Cwd 3.31
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.15
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.48
ExtUtils::Manifest 1.55
ExtUtils::ParseXS 2.2206
File::Spec 3.31
Module::Build 0.3607
Module::Signature n/a
Test::Harness 3.21
Test::More 0.94
YAML 0.70
YAML::Syck 1.12
version 0.82
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=2.6.18-4-xen-amd64, archname=x86_64-linux-thread-multi
uname='linux pigsty2 2.6.18-4-xen-amd64 #1 smp fri may 4 02:40:51 utc 2007 x86_64 gnulinux '
config_args='-de -Duse64bitall -Dusethreads -Dprefix=/home/david/cpantesting/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
THREADS_HAVE_PIDS USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API
Built under linux
Compiled at Jan 17 2009 20:41:01
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="5978"
PERL5_CPAN_IS_RUNNING="5978"
PERLVER="5.8.9"
PERL_INLINE_DIRECTORY="/home/david/.Inline-5.8.9"
@INC:
/home/david/cpantesting/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi
/home/david/cpantesting/perl-5.8.9/lib/5.8.9
/home/david/cpantesting/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi
/home/david/cpantesting/perl-5.8.9/lib/site_perl/5.8.9
.