Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Config-DB-0.0.2 v5.14.2 GNU/Linux
Date: 2011-10-12T11:36:48Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Daniele Ricci,
This is a computer-generated report for Config-DB-0.0.2
on perl 5.14.2, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_new.t ..... ok
DBD::DBM::db do failed: Cannot open /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/notable.lck: No such file or directory (2) at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBD/File.pm line 730 at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE notable"] at t/02_params.t line 5.
# Failed test 'ok call'
# at t/02_params.t line 35.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'nofield AS dbcfg_key' at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT nofield AS dbcfg_key, notable.* FROM notable"] at /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/blib/lib/Config/DB.pm line 96.
#
# Config::DB::read: reading 'notable' table at t/02_params.t line 34
# '
# expected: ''
# Looks like you failed 1 test of 6.
t/02_params.t ..
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests
DBD::DBM::db do failed: Cannot open /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/cfg.lck: No such file or directory (2) at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBD/File.pm line 730 at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
[for Statement "DROP TABLE cfg"] at t/03_get.t line 5.
# Failed test 'ok call'
# at t/03_get.t line 17.
# got: 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/blib/lib/Config/DB.pm line 96.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 16
# '
# expected: ''
# Failed test 'missing table parameter'
# at t/03_get.t line 20.
# 'DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
# [for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/blib/lib/Config/DB.pm line 96.
#
# Config::DB::read: reading 'cfg' table at t/03_get.t line 19
# '
# doesn't match '(?^:^Config::DB::get: missing table parameter at t/03_get.t line \d+$)'
DBD::DBM::db selectall_hashref failed: No such column 'ckey AS dbcfg_key' at /home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi/DBI/DBD/SqlEngine.pm line 795
[for Statement "SELECT ckey AS dbcfg_key, cfg.* FROM cfg"] at /tmp/loop_over_bdir-o8ntR1/Config-DB-0.0.2-kcBlN9/blib/lib/Config/DB.pm line 96.
Config::DB::read: reading 'cfg' table at t/03_get.t line 22
# Looks like you planned 20 tests but ran 4.
# Looks like you failed 2 tests of 4 run.
# Looks like your test exited with 25 just after 4.
t/03_get.t .....
Dubious, test returned 25 (wstat 6400, 0x1900)
Failed 18/20 subtests
Test Summary Report
-------------------
t/02_params.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 6
Non-zero exit status: 1
t/03_get.t (Wstat: 6400 Tests: 4 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 25
Parse errors: Bad plan. You planned 20 tests but ran 4.
Files=3, Tests=21, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.21 cusr 0.03 csys = 0.27 CPU)
Result: FAIL
Failed 2/3 test programs. 3/21 subtests failed.
make: *** [test_dynamic] Error 25
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -----
DBI 0 1.616
build_requires:
Module Need Have
------------------- ---- -----
ExtUtils::MakeMaker 0 6.59
configure_requires:
Module Need Have
------------------- ---- -----
ExtUtils::MakeMaker 0 6.59
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 9859
PERL5_CPAN_IS_RUNNING = 9859
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9800
Cwd 3.36
ExtUtils::CBuilder 0.280203
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.05
File::Spec 3.33
Module::Build 0.3800
Module::Signature 0.68
Test::Harness 3.23
Test::More 0.98
YAML 0.77
YAML::Syck 1.17
version 0.94
--
Summary of my perl5 (revision 5 version 14 subversion 2) configuration:
Commit id: dc281e6088d189558b79a5121119b7196c8b3db0
Platform:
osname=linux, osvers=2.6.32-5-amd64, archname=x86_64-linux-thread-multi
uname='linux k83 2.6.32-5-amd64 #1 smp tue jun 14 09:42:28 utc 2011 x86_64 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.11.2.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Oct 5 2011 14:23:43
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="9859"
PERL5_CPAN_IS_RUNNING="9859"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2/x86_64-linux-thread-multi
/home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/site_perl/5.14.2
/home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/5.14.2/x86_64-linux-thread-multi
/home/src/perl/repoperls/installed-perls/perl/v5.14.2/ba65/lib/5.14.2
.