Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL CELL-0.065 v5.18.2 GNU/Linux
Date: 2014-01-30T12:10:13Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Nathan Cutler,
This is a computer-generated report for CELL-0.065
on perl 5.18.2, created by CPAN-Reporter-1.2010.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Date::Easter;'
# at t/00-dependencies.t line 16.
# Tried to use 'Date::Easter'.
# Error: Can't locate Date/Easter.pm in @INC (you may need to install the Date::Easter module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at t/00-dependencies.t line 16.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 16.
# Failed test 'use Date::Holidays::CZ;'
# at t/00-dependencies.t line 17.
# Tried to use 'Date::Holidays::CZ'.
# Error: Can't locate Date/Holidays/CZ.pm in @INC (you may need to install the Date::Holidays::CZ module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at t/00-dependencies.t line 17.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 17.
# Failed test 'use Log::Fast;'
# at t/00-dependencies.t line 24.
# Tried to use 'Log::Fast'.
# Error: Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at t/00-dependencies.t line 24.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 24.
# Failed test 'use CELL;'
# at t/00-dependencies.t line 26.
# Tried to use 'CELL'.
# Error: Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
# Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
# Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
# Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL.pm line 8.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL.pm line 8.
# Compilation failed in require at t/00-dependencies.t line 26.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 26.
# Failed test 'use CELL::Config;'
# at t/00-dependencies.t line 27.
# Tried to use 'CELL::Config'.
# Error: Attempt to reload CELL/Config.pm aborted.
# Compilation failed in require at t/00-dependencies.t line 27.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 27.
# Failed test 'use CELL::Status;'
# at t/00-dependencies.t line 28.
# Tried to use 'CELL::Status'.
# Error: Attempt to reload CELL/Config.pm aborted.
# Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Message.pm line 7.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Message.pm line 7.
# Compilation failed in require at (eval 37) line 2.
# ...propagated at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/base.pm line 84.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Status.pm line 51.
# Compilation failed in require at t/00-dependencies.t line 28.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 28.
# Failed test 'use CELL::Load;'
# at t/00-dependencies.t line 29.
# Tried to use 'CELL::Load'.
# Error: Attempt to reload CELL/Load.pm aborted.
# Compilation failed in require at t/00-dependencies.t line 29.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 29.
# Failed test 'use CELL::Log;'
# at t/00-dependencies.t line 30.
# Tried to use 'CELL::Log'.
# Error: Attempt to reload CELL/Log.pm aborted.
# Compilation failed in require at t/00-dependencies.t line 30.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 30.
# Failed test 'use CELL::Message;'
# at t/00-dependencies.t line 31.
# Tried to use 'CELL::Message'.
# Error: Attempt to reload CELL/Message.pm aborted.
# Compilation failed in require at t/00-dependencies.t line 31.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 31.
# Failed test 'use CELL::Test;'
# at t/00-dependencies.t line 33.
# Tried to use 'CELL::Test'.
# Error: Attempt to reload CELL/Log.pm aborted.
# Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Test.pm line 6.
# BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Test.pm line 6.
# Compilation failed in require at t/00-dependencies.t line 33.
# BEGIN failed--compilation aborted at t/00-dependencies.t line 33.
# Looks like you failed 10 tests of 20.
t/00-dependencies.t ..
Dubious, test returned 10 (wstat 2560, 0xa00)
Failed 10/20 subtests
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at t/01-log.t line 6.
BEGIN failed--compilation aborted at t/01-log.t line 6.
t/01-log.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at t/02-util.t line 5.
BEGIN failed--compilation aborted at t/02-util.t line 5.
t/02-util.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2 .) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
Compilation failed in require at t/03-load.t line 6.
BEGIN failed--compilation aborted at t/03-load.t line 6.
t/03-load.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2 .) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at t/04-message.t line 6.
BEGIN failed--compilation aborted at t/04-message.t line 6.
t/04-message.t .......
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at t/05-status.t line 6.
BEGIN failed--compilation aborted at t/05-status.t line 6.
t/05-status.t ........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2 .) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
Compilation failed in require at t/06-config.t line 6.
BEGIN failed--compilation aborted at t/06-config.t line 6.
t/06-config.t ........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Log/Fast.pm in @INC (you may need to install the Log::Fast module) (@INC contains: /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/arch /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2 /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2 .) at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Log.pm line 9.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Load.pm line 7.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL/Config.pm line 13.
Compilation failed in require at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL.pm line 8.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-27379-ODMIo8/CELL-0.065-hlOe0Z/blib/lib/CELL.pm line 8.
Compilation failed in require at t/07-cell.t line 7.
BEGIN failed--compilation aborted at t/07-cell.t line 7.
t/07-cell.t ..........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
t/manifest.t ......... skipped: Author tests not required for installation
# Failed test 'Pod coverage on CELL'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL: requiring 'CELL' failed
# Failed test 'Pod coverage on CELL::Test'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Test: requiring 'CELL::Test' failed
# Failed test 'Pod coverage on CELL::Status'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Status: requiring 'CELL::Status' failed
# Failed test 'Pod coverage on CELL::Log'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Log: requiring 'CELL::Log' failed
# Failed test 'Pod coverage on CELL::Load'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Load: requiring 'CELL::Load' failed
# Failed test 'Pod coverage on CELL::Config'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Config: requiring 'CELL::Config' failed
# Failed test 'Pod coverage on CELL::Message'
# at /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/Test/Pod/Coverage.pm line 126.
# CELL::Message: requiring 'CELL::Message' failed
# Looks like you failed 7 tests of 8.
t/pod-coverage.t .....
Dubious, test returned 7 (wstat 1792, 0x700)
Failed 7/8 subtests
t/pod.t .............. ok
Test Summary Report
-------------------
t/00-dependencies.t (Wstat: 2560 Tests: 20 Failed: 10)
Failed tests: 5-6, 12-18, 20
Non-zero exit status: 10
t/01-log.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/02-util.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/03-load.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/04-message.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/05-status.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/06-config.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/07-cell.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/pod-coverage.t (Wstat: 1792 Tests: 8 Failed: 7)
Failed tests: 1, 3-8
Non-zero exit status: 7
Files=11, Tests=36, 4 wallclock secs ( 0.04 usr 0.02 sys + 0.62 cusr 0.06 csys = 0.74 CPU)
Result: FAIL
Failed 9/11 test programs. 17/36 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
perl 0 5.018002
build_requires:
Module Need Have
------------------- ---- --------
Test::More 0 1.001002
configure_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 6.87_05
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 27380
PERL5_CPAN_IS_RUNNING = 27380
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.00
CPAN::Meta 2.133380
Cwd 3.40
ExtUtils::CBuilder 0.280212
ExtUtils::Command 1.17
ExtUtils::Install 1.59
ExtUtils::MakeMaker 6.87_05
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.22
File::Spec 3.40
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4204
Module::Signature 0.73
Parse::CPAN::Meta 1.4409
Test::Harness 3.30
Test::More 1.001002
YAML 0.88
YAML::Syck 1.27
version 0.9907
--
Summary of my perl5 (revision 5 version 18 subversion 2) configuration:
Commit id: e2a4306ace4a19cb3a434e4eb9fedad6ff1248b4
Platform:
osname=linux, osvers=3.12-1-amd64, archname=x86_64-linux-thread-multi
uname='linux k83 3.12-1-amd64 #1 smp debian 3.12.6-2 (2013-12-29) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980 -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duseithreads -Uuselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.8.2', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.17'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Jan 19 2014 08:38:49
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="27380"
PERL5_CPAN_IS_RUNNING="27380"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/site_perl/5.18.2
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2/x86_64-linux-thread-multi
/home/sand/src/perl/repoperls/installed-perls/perl/v5.18.2/9980/lib/5.18.2
.