Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS niczero-mojar-mysql-871f8c6 v5.12.4 OpenBSD
Date: 2013-01-01T19:36:01Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear NICZERO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9133. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.12.4/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" test/*.t
# Testing Mojar::Mysql 2.001, Perl 5.012004, /home/cpan/pit/thr/perl-5.12.4/bin/perl
test/00-load.t ............. ok
test/30-mysql-connector.t .. ok
test/31-mysql-helper.t ..... ok
test/manifest.t ............ skipped: set RELEASE_TESTING to enable this test (developer only!)
test/pod.t ................. skipped: set TEST_POD to enable this test (developer only!)
All tests successful.
Files=5, Tests=10, 1 wallclock secs ( 0.02 usr 0.05 sys + 0.23 cusr 0.08 csys = 0.38 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
DBD::mysql 4.022 3.0008
DBI 1.622 1.53
Mojolicious 3.70 3.33
Test::More 0.98 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9133
CPANPLUS::Dist::Build 0.68
Cwd 3.33
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.64
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.33
Module::Build 0.4003
Pod::Parser 1.37
Pod::Simple 3.14
Test::Harness 3.25
Test::More 0.98
version 0.9901
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.84.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/script:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 23277
PERL5_CPANPLUS_IS_VERSION = 0.9133
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.12.4
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.12.4/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 4) configuration:
Platform:
osname=openbsd, osvers=5.1, archname=OpenBSD.amd64-openbsd-thread-multi
uname='openbsd oliphant.bingosnet.co.uk 5.1 generic#181 amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.12.4 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.1'
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.62.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY MYMALLOC PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under openbsd
Compiled at May 5 2012 04:17:09
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/arch:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="23277"
PERL5_CPANPLUS_IS_VERSION="0.9133"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.12.4"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/lib
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBI-1.622/blib/arch
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/lib
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/DBD-mysql-4.022/blib/arch
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/lib
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/Mojolicious-3.70/blib/arch
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/lib
/home/cpan/pit/thr/conf/perl-5.12.4/.cpanplus/5.12.4/build/niczero-mojar-mysql-871f8c6/blib/arch
/home/cpan/pit/thr/perl-5.12.4/lib/site_perl/5.12.4/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.12.4/lib/site_perl/5.12.4
/home/cpan/pit/thr/perl-5.12.4/lib/5.12.4/OpenBSD.amd64-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.12.4/lib/5.12.4
.