Back
From: metabase:user:30ae4450-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Log-Syslog-Fast-0.61 v5.16.2 GNU/Linux
Date: 2013-06-22T10:57:13Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Adam Thomason,
This is a computer-generated report for Log-Syslog-Fast-0.61
on perl 5.16.2, created by CPAN-Reporter-1.2010.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/c/perl5/perlbrew/perls/5.16.2i/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Log::Syslog::Fast;'
# at t/00-compile.t line 6.
# Tried to use 'Log::Syslog::Fast'.
# Error: Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
# END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
# Failed test 'use Log::Syslog::Fast::Simple;'
# at t/00-compile.t line 7.
# Tried to use 'Log::Syslog::Fast::Simple'.
# Error: Attempt to reload Log/Syslog/Fast.pm aborted.
# Compilation failed in require at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast/Simple.pm line 6.
# BEGIN failed--compilation aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast/Simple.pm line 6.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
# Looks like you failed 2 tests of 2.
t/00-compile.t .................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/01-Log-Syslog-Fast.t line 14.
BEGIN failed--compilation aborted at t/01-Log-Syslog-Fast.t line 14.
# Looks like your test exited with 2 before it could output anything.
t/01-Log-Syslog-Fast.t .........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 206/206 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast/Simple.pm line 6.
BEGIN failed--compilation aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast/Simple.pm line 6.
Compilation failed in require at t/02-Log-Syslog-Fast-Simple.t line 6.
BEGIN failed--compilation aborted at t/02-Log-Syslog-Fast-Simple.t line 6.
# Looks like your test exited with 2 before it could output anything.
t/02-Log-Syslog-Fast-Simple.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 7/7 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/03-corner-cases.t line 7.
BEGIN failed--compilation aborted at t/03-corner-cases.t line 7.
# Looks like your test exited with 2 before it could output anything.
t/03-corner-cases.t ............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 1/1 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/04-accessors.t line 6.
BEGIN failed--compilation aborted at t/04-accessors.t line 6.
# Looks like your test exited with 2 before it could output anything.
t/04-accessors.t ...............
Dubious, test returned 2 (wstat 512, 0x200)
Failed 19/19 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/05-ipv6.t line 14.
BEGIN failed--compilation aborted at t/05-ipv6.t line 14.
# Looks like your test exited with 2 before it could output anything.
t/05-ipv6.t ....................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 73/73 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/06-large-strings.t line 12.
BEGIN failed--compilation aborted at t/06-large-strings.t line 12.
# Looks like your test exited with 2 before it could output anything.
t/06-large-strings.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
Failed 10/10 subtests
t/07-Log-Syslog-Fast-PP.t ...... ok
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/08-fd-leak.t line 16.
BEGIN failed--compilation aborted at t/08-fd-leak.t line 16.
# Looks like your test exited with 2 before it could output anything.
t/08-fd-leak.t .................
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Not a CODE reference at /home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi/DynaLoader.pm line 213.
END failed--call queue aborted at /home/c/.cpan/build/Log-Syslog-Fast-0.61-Ak7jP9/blib/lib/Log/Syslog/Fast.pm line 213.
Compilation failed in require at t/09-undef-strings.t line 4.
BEGIN failed--compilation aborted at t/09-undef-strings.t line 4.
t/09-undef-strings.t ...........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Test Summary Report
-------------------
t/00-compile.t (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
t/01-Log-Syslog-Fast.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 206 tests but ran 0.
t/02-Log-Syslog-Fast-Simple.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/03-corner-cases.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/04-accessors.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 19 tests but ran 0.
t/05-ipv6.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 73 tests but ran 0.
t/06-large-strings.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 10 tests but ran 0.
t/08-fd-leak.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/09-undef-strings.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
Files=10, Tests=150, 1 wallclock secs ( 0.02 usr 0.09 sys + 0.36 cusr 0.22 csys = 0.69 CPU)
Result: FAIL
Failed 9/10 test programs. 2/150 subtests failed.
make: *** [test_dynamic] ÐÑибка 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
---------------------- ---- -------
Log::Syslog::Constants 1.01 1.02
build_requires:
Module Need Have
---------------------- ---- -------
ExtUtils::MakeMaker 0 6.63_02
configure_requires:
Module Need Have
---------------------- ---- -------
ExtUtils::MakeMaker 0 6.63_02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = ru_RU.utf8
PATH = /home/c/perl5/perlbrew/bin:/home/c/perl5/perlbrew/perls/5.16.2i/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/arch:/home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 19569
PERL5_CPAN_IS_RUNNING = 19569
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4184,19569
PERLBREW_MANPATH = /home/c/perl5/perlbrew/perls/5.16.2i/man
PERLBREW_PATH = /home/c/perl5/perlbrew/bin:/home/c/perl5/perlbrew/perls/5.16.2i/bin
PERLBREW_PERL = 5.16.2i
PERLBREW_ROOT = /home/c/perl5/perlbrew
PERLBREW_SKIP_INIT = 1
PERLBREW_VERSION = 0.58
PERL_CR_SMOKER_CURRENT = Log-Syslog-Fast-0.61
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/c/perl5/perlbrew/perls/5.16.2i/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 24 25 27 29 30 44 46 108 109 115 1000 1001
$EGID = 1000 24 25 27 29 30 44 46 108 109 115 1000 1001
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.00
CPAN::Meta 2.120921
Cwd 3.40
ExtUtils::CBuilder 0.280206
ExtUtils::Command 1.17
ExtUtils::Install 1.58
ExtUtils::MakeMaker 6.63_02
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.16
File::Spec 3.40
JSON 2.53
JSON::PP 2.27200
Module::Build 0.4005
Module::Signature 0.70
Parse::CPAN::Meta 1.4404
Test::Harness 3.28
Test::More 0.98
YAML 0.84
YAML::Syck 1.22
version 0.9901
--
Summary of my perl5 (revision 5 version 16 subversion 2) configuration:
Platform:
osname=linux, osvers=2.6.32-5-686, archname=i686-linux-thread-multi
uname='linux deb1 2.6.32-5-686 #1 smp sun sep 23 09:49:36 utc 2012 i686 gnulinux '
config_args='-de -Dprefix=/home/c/perl5/perlbrew/perls/5.16.2i -Dusethreads -Aeval:scriptdir=/home/c/perl5/perlbrew/perls/5.16.2i/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.5', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib /usr/lib/i486-linux-gnu /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.11.3.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.11.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Jan 26 2013 16:12:36
%ENV:
PERL5LIB="/home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/arch:/home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="19569"
PERL5_CPAN_IS_RUNNING="19569"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="4184,19569"
PERLBREW_MANPATH="/home/c/perl5/perlbrew/perls/5.16.2i/man"
PERLBREW_PATH="/home/c/perl5/perlbrew/bin:/home/c/perl5/perlbrew/perls/5.16.2i/bin"
PERLBREW_PERL="5.16.2i"
PERLBREW_ROOT="/home/c/perl5/perlbrew"
PERLBREW_SKIP_INIT="1"
PERLBREW_VERSION="0.58"
PERL_CR_SMOKER_CURRENT="Log-Syslog-Fast-0.61"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/arch
/home/c/.cpan/build/Log-Syslog-Constants-1.02-3DvL7g/blib/lib
/home/c/perl5/perlbrew/perls/5.16.2i/lib/site_perl/5.16.2/i686-linux-thread-multi
/home/c/perl5/perlbrew/perls/5.16.2i/lib/site_perl/5.16.2
/home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2/i686-linux-thread-multi
/home/c/perl5/perlbrew/perls/5.16.2i/lib/5.16.2
.