POE-Loop-Kqueue v0.02 Perl 5 v5.27.10 x86_64-linux

Status
Unknown
From
Slaven Rezić (SREZIC)
Dist
POE-Loop-Kqueue v0.02
Platform
Perl 5 v5.27.10 x86_64-linux
Date
2018-03-25 15:59:33
ID
825a39d0-3045-11e8-adf9-e7ff7420f555
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--
Dear Sergey Skvortsov,

This is a computer-generated report for POE-Loop-Kqueue-0.02
on perl 5.27.10, created by CPAN-Reporter-1.2018.

Thank you for uploading your work to CPAN.  However, attempting to
test your distribution gave an inconclusive result.

This could be because your distribution had an error during the make/build
stage, did not define tests, tests could not be found, because your tests were
interrupted before they finished, or because the results of the tests could not
be parsed.  You may wish to consult the CPAN Testers Wiki:

http://wiki.cpantesters.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester:

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make':

cp Kqueue.pm blib/lib/POE/Loop/Kqueue.pm
Running Mkbootstrap for Kqueue ()
chmod 644 "Kqueue.bs"
"/opt/perl-5.27.10/bin/perl5.27.10" -MExtUtils::Command::MM -e 'cp_nonempty' -- Kqueue.bs blib/arch/auto/POE/Loop/Kqueue/Kqueue.bs 644
"/opt/perl-5.27.10/bin/perl5.27.10" "/opt/perl-5.27.10/lib/site_perl/5.27.10/ExtUtils/xsubpp"  -typemap '/opt/perl-5.27.10/lib/5.27.10/ExtUtils/typemap'  Kqueue.xs > Kqueue.xsc
mv Kqueue.xsc Kqueue.c
cc -c   -Wall -Wpointer-arith -Winline -Wstrict-prototypes -Wconversion -O2   -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE"   Kqueue.c
In file included from /opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/perl.h:3629:0,
                 from Kqueue.xs:9:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘SvAMAGIC_off’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/sv.h:984:39: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
 #define HvAMAGIC_off(hv) (SvFLAGS(hv) &=~ SVf_AMAGIC)
                                       ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:215:2: note: in expansion of macro ‘HvAMAGIC_off’
  HvAMAGIC_off(SvSTASH(SvRV(sv)));
  ^~~~~~~~~~~~
In file included from /opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/perl.h:5444:0,
                 from Kqueue.xs:9:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_SvPADSTALE_off’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:228:24: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
     return SvFLAGS(sv) &= ~SVs_PADSTALE;
                        ^~
In file included from /opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/regexp.h:21:0,
                 from /opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/perl.h:3630,
                 from Kqueue.xs:9:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘Perl_valid_utf8_to_uvchr’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/utf8.h:179:31: warning: conversion to ‘UV {aka long unsigned int}’ from ‘int’ may change the sign of the result [-Wsign-conversion]
 #define NATIVE_UTF8_TO_I8(ch) (__ASSERT_(FITS_IN_8_BITS(ch)) ((U8) (ch)))
                               ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:308:10: note: in expansion of macro ‘NATIVE_UTF8_TO_I8’
     uv = NATIVE_UTF8_TO_I8(uv) & UTF_START_MASK(expectlen);
          ^~~~~~~~~~~~~~~~~
In file included from /opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/perl.h:5444:0,
                 from Kqueue.xs:9:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_is_utf8_string_flags’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:883:16: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
     if ((flags & ~UTF8_DISALLOW_PERL_EXTENDED)
                ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:889:16: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
     if ((flags & ~UTF8_DISALLOW_PERL_EXTENDED)
                ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘Perl_is_utf8_string_loclen’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:965:25: warning: conversion to ‘STRLEN {aka long unsigned int}’ from ‘long int’ may change the sign of the result [-Wsign-conversion]
         STRLEN outlen = first_variant - s;
                         ^~~~~~~~~~~~~
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_is_strict_utf8_string_loclen’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1042:25: warning: conversion to ‘STRLEN {aka long unsigned int}’ from ‘long int’ may change the sign of the result [-Wsign-conversion]
         STRLEN outlen = first_variant - s;
                         ^~~~~~~~~~~~~
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_is_c9strict_utf8_string_loclen’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1119:25: warning: conversion to ‘STRLEN {aka long unsigned int}’ from ‘long int’ may change the sign of the result [-Wsign-conversion]
         STRLEN outlen = first_variant - s;
                         ^~~~~~~~~~~~~
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_is_utf8_string_loclen_flags’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1193:16: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
     if ((flags & ~UTF8_DISALLOW_PERL_EXTENDED)
                ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1199:16: warning: negative integer implicitly converted to unsigned type [-Wsign-conversion]
     if ((flags & ~UTF8_DISALLOW_PERL_EXTENDED)
                ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1219:25: warning: conversion to ‘STRLEN {aka long unsigned int}’ from ‘long int’ may change the sign of the result [-Wsign-conversion]
         STRLEN outlen = first_variant - s;
                         ^~~~~~~~~~~~~
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_cx_pushsub’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1760:20: warning: conversion to ‘U8 {aka unsigned char}’ from ‘int’ may alter its value [-Wconversion]
     cx->cx_type |= (hasargs) ? CXp_HASARGS : 0;
                    ^
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h: In function ‘S_cx_pusheval’:
/opt/perl-5.27.10/lib/5.27.10/x86_64-linux/CORE/inline.h:1879:19: warning: conversion to ‘U16 {aka short unsigned int}’ from ‘int’ may alter its value [-Wconversion]
     cx->blk_u16 = (PL_in_eval & 0x3F) | ((U16)PL_op->op_type << 7);
                   ^
Kqueue.xs: At top level:
Kqueue.xs:17:23: fatal error: sys/event.h: Datei oder Verzeichnis nicht gefunden
 #include <sys/event.h>
                       ^
compilation terminated.
Makefile:330: die Regel für Ziel „Kqueue.o“ scheiterte
make: *** [Kqueue.o] Fehler 1

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module              Need   Have 
    ------------------- ------ -----
    POE                 0.3009 1.367

build_requires:

    Module              Need   Have 
    ------------------- ------ -----
    ExtUtils::MakeMaker 0      7.34 


------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = C
    LC_ALL = de_DE.UTF-8
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/cpansand/bin/linux-gnu:/home/cpansand/bin/sh:/home/cpansand/bin:/usr/games:/home/cpansand/devel:/home/eserte/src/srezic-misc/scripts
    PERL = /opt/perl-5.27.10/bin/perl5.27.10
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 5922
    PERL5_CPAN_IS_RUNNING = 5922
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 8244,5922
    PERLDOC = -MPod::Perldoc::ToTextOverstrike
    PERL_BATCH = yes
    PERL_CANARY_STABILITY_NOPROMPT = 1
    PERL_CPAN_REPORTER_CONFIG = /var/tmp/cpansmoker-1023/2018032512/cpanreporter_001_config.ini
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_PARALLEL_SMOKER = yes
    PERL_USE_UNSAFE_INC = 1
    SHELL = /usr/bin/zsh
    TERM = screen
    TMPDIR = /var/tmp/cpansmoker-1023/2018032512

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl-5.27.10/bin/perl5.27.10
    $UID/$EUID = 1023 / 1023
    $GID = 1023 1023
    $EGID = 1023 1023

Perl module toolchain versions installed:

    Module              Have    
    ------------------- --------
    CPAN                2.16    
    CPAN::Meta          2.150010
    Cwd                 3.74    
    ExtUtils::CBuilder  0.280230
    ExtUtils::Command   7.34    
    ExtUtils::Install   2.14    
    ExtUtils::MakeMaker 7.34    
    ExtUtils::Manifest  1.70    
    ExtUtils::ParseXS   3.35    
    File::Spec          3.74    
    JSON                2.97001 
    JSON::PP            2.97001 
    Module::Build       0.4224  
    Module::Signature   0.81    
    Parse::CPAN::Meta   2.150010
    Test::Harness       3.42    
    Test::More          1.302133
    YAML                1.24    
    YAML::Syck          1.30    
    version             0.9918  


--

Summary of my perl5 (revision 5 version 27 subversion 10) configuration:
   
  Platform:
    osname=linux
    osvers=4.9.0-3-amd64
    archname=x86_64-linux
    uname='linux debian9 4.9.0-3-amd64 #1 smp debian 4.9.30-2+deb9u5 (2017-09-19) x86_64 gnulinux '
    config_args='-ds -e -Dprefix=/opt/perl-5.27.10 -Dusedevel -Dusemallocwrap=no -Dcf_email=srezic@cpan.org'
    hint=recommended
    useposix=true
    d_sigaction=define
    useithreads=undef
    usemultiplicity=undef
    use64bitint=define
    use64bitall=define
    uselongdouble=undef
    usemymalloc=n
    default_inc_excludes_dot=define
    bincompat5005=undef
  Compiler:
    cc='cc'
    ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
    optimize='-O2'
    cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
    ccversion=''
    gccversion='6.3.0 20170516'
    gccosandvers=''
    intsize=4
    longsize=8
    ptrsize=8
    doublesize=8
    byteorder=12345678
    doublekind=3
    d_longlong=define
    longlongsize=8
    d_longdbl=define
    longdblsize=16
    longdblkind=3
    ivtype='long'
    ivsize=8
    nvtype='double'
    nvsize=8
    Off_t='off_t'
    lseeksize=8
    alignbytes=8
    prototype=define
  Linker and Libraries:
    ld='cc'
    ldflags =' -fstack-protector-strong -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/6/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
    libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
    perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
    libc=libc-2.24.so
    so=so
    useshrplib=false
    libperl=libperl.a
    gnulibc_version='2.24'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs
    dlext=so
    d_dlsymun=undef
    ccdlflags='-Wl,-E'
    cccdlflags='-fPIC'
    lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'


Characteristics of this binary (from libperl): 
  Compile-time options:
    HAS_TIMES
    PERLIO_LAYERS
    PERL_COPY_ON_WRITE
    PERL_DONT_CREATE_GVSV
    PERL_OP_PARENT
    PERL_PRESERVE_IVUV
    PERL_USE_DEVEL
    USE_64_BIT_ALL
    USE_64_BIT_INT
    USE_LARGE_FILES
    USE_LOCALE
    USE_LOCALE_COLLATE
    USE_LOCALE_CTYPE
    USE_LOCALE_NUMERIC
    USE_LOCALE_TIME
    USE_PERLIO
    USE_PERL_ATOF
  Built under linux
  Compiled at Mar 20 2018 21:34:28
  %ENV:
    PERL="/opt/perl-5.27.10/bin/perl5.27.10"
    PERL5LIB=""
    PERL5OPT=""
    PERL5_CPANPLUS_IS_RUNNING="5922"
    PERL5_CPAN_IS_RUNNING="5922"
    PERL5_CPAN_IS_RUNNING_IN_RECURSION="8244,5922"
    PERLDOC="-MPod::Perldoc::ToTextOverstrike"
    PERL_BATCH="yes"
    PERL_CANARY_STABILITY_NOPROMPT="1"
    PERL_CPAN_REPORTER_CONFIG="/var/tmp/cpansmoker-1023/2018032512/cpanreporter_001_config.ini"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_PARALLEL_SMOKER="yes"
    PERL_USE_UNSAFE_INC="1"
  @INC:
    /opt/perl-5.27.10/lib/site_perl/5.27.10/x86_64-linux
    /opt/perl-5.27.10/lib/site_perl/5.27.10
    /opt/perl-5.27.10/lib/5.27.10/x86_64-linux
    /opt/perl-5.27.10/lib/5.27.10
    .