CAD-Mesh3D v0.002 Perl 5 v5.30.2 i686-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
CAD-Mesh3D v0.002
- Platform
- Perl 5 v5.30.2 i686-linux
- Date
- 2020-10-25 23:40:48
- ID
- 827e0152-171b-11eb-a9f9-f9eb91108de4
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PETERCJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
"/home/cpan/pit/bare/perl-5.30.2/bin/perl" "-Iblib/arch" "-Iblib/lib" patch/attemptWinPatch.pl lib/CAD/Format/STL.pm
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.30.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-use.t ......... ok
t/10-initialize.t .. ok
t/20-math.t ........ ok
t/40-format.t ...... ok
t/99-fault.t ....... ok
t/STL-inputStl.t ... ok
t/STL-outputStl.t .. ok
# CAD::Format::STL: v0.2.1 and earlier had a bug on Windows for reading
# or writing binary STL, where
# 1) if the binary encoding for the float to be written includes 0x0A (LF),
# it will be written as 0x0D0A (so an extra byte gets written to convert
# LF to make CRLF), which corrupts the binary STL.
# 2) if the file already has 0x0D0A written, then when the file gets read,
# it will be be interpreted as just 0x0A, and will thus be a corrupted
#
# This test determines whether your version of CAD::Format::STL has had
# the bug removed and/or has been patched.
#
# CAD::Format::STL v0.2.1 from /home/cpan/pit/jail/oQLEdefgkY/lib/perl5/CAD/Format/STL.pm
#
#
t/stl_bin_crlf.t ... ok
All tests successful.
Files=8, Tests=304, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.49 cusr 0.03 csys = 0.56 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
CAD::Format::STL v0.2.1 v0.2.1
Carp 1.50 0
Exporter 5.73 5.57
ExtUtils::MakeMaker 7.48 0
Math::Vector::Real 0.18 0.18
Test::Exception 0.43 0
Test::More 1.302181 0.86
constant 1.33 0
strict 1.11 0
warnings 1.44 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.48
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.48
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.40
File::Spec 3.78
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302181
Test::Harness 3.42
Test::More 1.302181
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/oQLEdefgkY/lib/perl5:/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 4767
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.30.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/oQLEdefgkY
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/oQLEdefgkY"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/oQLEdefgkY
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.30.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 30 subversion 2) configuration:
Platform:
osname=linux
osvers=4.19.0-8-686
archname=i686-linux
uname='linux dagobah 4.19.0-8-686 #1 smp debian 4.19.98-1 (2020-01-26) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.30.2'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=undef
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='8.3.0'
gccosandvers=''
intsize=4
longsize=4
ptrsize=4
doublesize=8
byteorder=1234
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=12
longdblkind=3
ivtype='long'
ivsize=4
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=4
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i686-linux-gnu/8/include-fixed /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.28.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.28'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Mar 15 2020 18:54:01
%ENV:
PERL5LIB="/home/cpan/pit/jail/oQLEdefgkY/lib/perl5:/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/lib:/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="4767"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.30.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/oQLEdefgkY"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/oQLEdefgkY""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/oQLEdefgkY"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/oQLEdefgkY/lib/perl5/5.30.2/i686-linux
/home/cpan/pit/jail/oQLEdefgkY/lib/perl5/5.30.2
/home/cpan/pit/jail/oQLEdefgkY/lib/perl5/i686-linux
/home/cpan/pit/jail/oQLEdefgkY/lib/perl5
/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/lib
/home/cpan/pit/bare/conf/perl-5.30.2/.cpanplus/5.30.2/build/5tUUpbiT4P/CAD-Mesh3D-0.002/blib/arch
/home/cpan/pit/bare/perl-5.30.2/lib/site_perl/5.30.2/i686-linux
/home/cpan/pit/bare/perl-5.30.2/lib/site_perl/5.30.2
/home/cpan/pit/bare/perl-5.30.2/lib/5.30.2/i686-linux
/home/cpan/pit/bare/perl-5.30.2/lib/5.30.2