PMLTQ-Commands v2.0.3 Perl 5 v5.26.3 x86_64-linux-thread-multi-ld
- Status
- Fail
- From
- Andreas J. König (ANDK)
- Dist
-
PMLTQ-Commands v2.0.3
- Platform
- Perl 5 v5.26.3 x86_64-linux-thread-multi-ld
- Date
- 2019-12-05 01:07:00
- ID
- 8a55c20a-16fb-11ea-8c07-0080c9a3b183
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Matyas Kopp,
This is a computer-generated report for PMLTQ-Commands-2.0.3
on perl 5.26.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
# Failed test 'PMLTQ/Command/convert.pm loaded ok'
# at t/00-compile.t line 60.
# got: '512'
# expected: '0'
Can't locate PMLTQ/PML2BASE.pm in @INC (you may need to install the PMLTQ::PML2BASE module) (@INC contains: /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/arch /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3 .) at /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib/PMLTQ/Command/convert.pm line 11.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib/PMLTQ/Command/convert.pm line 11.
Compilation failed in require at -e line 1.
# Failed test 'PMLTQ/Command/init.pm loaded ok'
# at t/00-compile.t line 60.
# got: '512'
# expected: '0'
Can't locate PMLTQ/PML2BASE.pm in @INC (you may need to install the PMLTQ::PML2BASE module) (@INC contains: /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/arch /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/arch /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3 /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3/x86_64-linux-thread-multi-ld /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3 .) at /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib/PMLTQ/Command/init.pm line 9.
BEGIN failed--compilation aborted at /tmp/loop_over_bdir-2483870-adDBgE/PMLTQ-Commands-2.0.3-0/blib/lib/PMLTQ/Command/init.pm line 9.
Compilation failed in require at -e line 1.
# Looks like you failed 2 tests of 17.
t/00-compile.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/17 subtests
(less 1 skipped subtest: 14 okay)
Test Summary Report
-------------------
t/00-compile.t (Wstat: 512 Tests: 17 Failed: 2)
Failed tests: 4, 6
Non-zero exit status: 2
Files=1, Tests=17, 10 wallclock secs ( 0.03 usr 0.01 sys + 2.06 cusr 0.50 csys = 2.60 CPU)
Result: FAIL
Failed 1/1 test programs. 2/17 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------- ------ --------
File::ShareDir 1.00 1.116
Hash::Merge 0 0.300
JSON 0 4.02
PMLTQ v2.0.1 3.0.2
Term::Encoding 0 0.03
Term::UI 0 0.46
URI::Encode 0 1.1.1
build_requires:
Module Need Have
-------------- ------ --------
File::Spec 0 3.75
IO::Handle 0 1.39
IPC::Open3 0 1.20
Module::Build 0.3601 0.4229
Test::More 0 1.302169
Test::Most 0 0.35
configure_requires:
Module Need Have
-------------- ------ --------
Module::Build 0.3601 0.4229
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 2483880
PERL5_CPAN_IS_RUNNING = 2483880
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- ----------
CPAN 2.27
CPAN::Meta 2.150010
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.38
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.38
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.34
File::Spec 3.75
JSON 4.02
JSON::PP 2.27400_02
Module::Build 0.4229
Module::Signature 0.83
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302169
YAML 1.29
YAML::Syck 1.31
version 0.9924
--
Summary of my perl5 (revision 5 version 26 subversion 3) configuration:
Derived from: 92583df5dc9b9edbcd4a9649f753e180b9729590
Platform:
osname=linux
osvers=5.3.0-2-amd64
archname=x86_64-linux-thread-multi-ld
uname='linux k93msid 5.3.0-2-amd64 #1 smp debian 5.3.9-3 (2019-11-19) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Duseithreads -Duselongdouble -DEBUGGING=both'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2 -g'
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='9.2.1 20191109'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/9/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.29.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.29'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
DEBUGGING
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_TRACK_MEMPOOL
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
uncommitted-changes
Built under linux
Compiled at Nov 25 2019 06:43:47
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="2483880"
PERL5_CPAN_IS_RUNNING="2483880"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/site_perl/5.26.3
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3/x86_64-linux-thread-multi-ld
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.26.3/ac75/lib/5.26.3
.