Symlink-DSL v0.2.0 Perl 5 v5.8.9 i386-freebsd
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Symlink-DSL v0.2.0
- Platform
- Perl 5 v5.8.9 i386-freebsd
- Date
- 2019-07-15 14:19:28
- ID
- 8e86cb18-a70b-11e9-9ccb-b1ae95f66eb9
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SHLOMIF,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9178. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
# Failed test 'Symlink/DSL.pm loaded ok'
# at t/00-compile.t line 45.
# got: '65280'
# expected: '0'
Backslash found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "if ( $val !~ /\"
(Might be a runaway multi-line // string starting on line 28)
(Do you need to predeclare if?)
Bareword found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "9A"
(Missing operator before A?)
Bareword found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "9A"
(Missing operator before A?)
Backslash found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "_\"
Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 28.
Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 28.
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "if ( $val !~ /\"
Global symbol "$self" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 45.
Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 45.
syntax error at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 46, near "}"
Compilation failed in require at -e line 1.
# Failed test 'bin/symlink-dsl compiled ok'
# at t/00-compile.t line 78.
# got: '65280'
# expected: '0'
Backslash found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "if ( $val !~ /\" (Might be a runaway multi-line // string starting on line 28) (Do you need to predeclare if?)Bareword found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "9A" (Missing operator before A?)Bareword found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "9A" (Missing operator before A?)Backslash found where operator expected at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "_\"Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 28.Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 28.syntax error at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 41, near "if ( $val !~ /\"Global symbol "$self" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 45.Global symbol "$val" requires explicit package name at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 45.syntax error at /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib/Symlink/DSL.pm line 46, near "}"Compilation failed in require at bin/symlink-dsl line 6.BEGIN failed--compilation aborted at bin/symlink-dsl line 6. at t/00-compile.t line 87, <GEN4> line 16.
# Looks like you failed 2 tests of 2.
t/00-compile.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests
Test Summary Report
-------------------
t/00-compile.t (Wstat: 512 Tests: 2 Failed: 2)
Failed tests: 1-2
Non-zero exit status: 2
Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.08 cusr 0.07 csys = 0.17 CPU)
Result: FAIL
Failed 1/1 test programs. 2/2 subtests failed.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Cwd 3.75 0
File::Basename 2.77 0
File::Path 2.16 0
File::Spec 3.75 0
Getopt::Long 2.37 0
IO::Handle 1.27 0
IPC::Open3 1.03 0
Module::Build 0.4229 0.28
Test::More 1.302164 0.88
autodie 2.29 0
strict 1.03 0
warnings 1.05_01 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9178
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.36
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.36
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.35
Pod::Simple 3.39
Test2 1.302164
Test::Harness 3.42
Test::More 1.302164
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/script:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 38009
PERL5_CPANPLUS_IS_VERSION = 0.9178
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/sqYCGjjqVC
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/sqYCGjjqVC"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/sqYCGjjqVC
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl5.8.9
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=freebsd, osvers=11.3-release, archname=i386-freebsd
uname='freebsd froggle 11.3-release freebsd 11.3-release #0 r349754: fri jul 5 04:31:33 utc 2019 root@releng2.nyi.freebsd.org:usrobjusrsrcsysgeneric i386 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 8.0.0 (tags/RELEASE_800/final 356365)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-ldl -lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_FAST_STDIO USE_LARGE_FILES
USE_PERLIO
Locally applied patches:
Devel::PatchPerl 1.64
Built under freebsd
Compiled at Jul 13 2019 10:44:29
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="38009"
PERL5_CPANPLUS_IS_VERSION="0.9178"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/sqYCGjjqVC"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/sqYCGjjqVC""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/sqYCGjjqVC"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5/5.8.9/i386-freebsd
/usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5/5.8.9
/usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5/i386-freebsd
/usr/home/cpan/pit/jail/sqYCGjjqVC/lib/perl5
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/o4RZoQ_nuZ/Symlink-DSL-0.2.0/blib/arch
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/i386-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.