Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Tie-Handle-HTTP-0.02 v5.13.7 NetBSD
Date: 2011-01-22T04:10:36Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear HACHI,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9010. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Jan 22 04:47:40 2011] Skip blib/lib/LWP/RobotUA.pm (unchanged)
Skip blib/lib/LWP/Authen/Ntlm.pm (unchanged)
Skip blib/lib/LWP.pm (unchanged)
Skip blib/lib/HTTP/Headers/ETag.pm (unchanged)
Skip blib/lib/LWP/Protocol.pm (unchanged)
Skip blib/lib/lwptut.pod (unchanged)
Skip blib/lib/HTTP/Request/Common.pm (unchanged)
Skip blib/lib/HTTP/Message.pm (unchanged)
Skip blib/lib/LWP/Protocol/ftp.pm (unchanged)
Skip blib/lib/HTML/Form.pm (unchanged)
Skip blib/lib/HTTP/Cookies/Netscape.pm (unchanged)
Skip blib/lib/LWP/Authen/Digest.pm (unchanged)
Skip blib/lib/LWP/Protocol/gopher.pm (unchanged)
Skip blib/lib/Net/HTTP/NB.pm (unchanged)
Skip blib/lib/HTTP/Status.pm (unchanged)
Skip blib/lib/LWP/Protocol/cpan.pm (unchanged)
Skip blib/lib/Net/HTTPS.pm (unchanged)
Skip blib/lib/HTTP/Headers/Util.pm (unchanged)
Skip blib/lib/LWP/Authen/Basic.pm (unchanged)
Skip blib/lib/HTTP/Cookies/Microsoft.pm (unchanged)
Skip blib/lib/LWP/UserAgent.pm (unchanged)
Skip blib/lib/LWP/Protocol/loopback.pm (unchanged)
Skip blib/lib/LWP/Protocol/nntp.pm (unchanged)
Skip blib/lib/LWP/Protocol/http.pm (unchanged)
Skip blib/lib/LWP/Protocol/https10.pm (unchanged)
Skip blib/lib/LWP/Protocol/mailto.pm (unchanged)
Skip blib/lib/LWP/MemberMixin.pm (unchanged)
Skip blib/lib/HTTP/Headers/Auth.pm (unchanged)
Skip blib/lib/LWP/Debug.pm (unchanged)
Skip blib/lib/Net/HTTP.pm (unchanged)
Skip blib/lib/LWP/media.types (unchanged)
Skip blib/lib/HTTP/Daemon.pm (unchanged)
Skip blib/lib/HTTP/Cookies.pm (unchanged)
Skip blib/lib/LWP/ConnCache.pm (unchanged)
Skip blib/lib/File/Listing.pm (unchanged)
Skip blib/lib/WWW/RobotRules/AnyDBM_File.pm (unchanged)
Skip blib/lib/LWP/MediaTypes.pm (unchanged)
Skip blib/lib/lwpcook.pod (unchanged)
Skip blib/lib/HTTP/Date.pm (unchanged)
Skip blib/lib/LWP/Protocol/file.pm (unchanged)
Skip blib/lib/LWP/Protocol/http10.pm (unchanged)
Skip blib/lib/LWP/Protocol/GHTTP.pm (unchanged)
Skip blib/lib/LWP/DebugFile.pm (unchanged)
Skip blib/lib/HTTP/Negotiate.pm (unchanged)
Skip blib/lib/HTTP/Request.pm (unchanged)
Skip blib/lib/WWW/RobotRules.pm (unchanged)
Skip blib/lib/LWP/Protocol/data.pm (unchanged)
Skip blib/lib/HTTP/Config.pm (unchanged)
Skip blib/lib/LWP/Protocol/nogo.pm (unchanged)
Skip blib/lib/HTTP/Response.pm (unchanged)
Skip blib/lib/LWP/Simple.pm (unchanged)
Skip blib/lib/HTTP/Headers.pm (unchanged)
Skip blib/lib/LWP/Protocol/https.pm (unchanged)
Skip blib/lib/Bundle/LWP.pm (unchanged)
Skip blib/lib/Net/HTTP/Methods.pm (unchanged)
cp bin/lwp-dump blib/script/lwp-dump
/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lwp-dump
cp bin/lwp-mirror blib/script/lwp-mirror
/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lwp-mirror
cp bin/lwp-download blib/script/lwp-download
/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lwp-download
cp bin/lwp-rget blib/script/lwp-rget
/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lwp-rget
cp bin/lwp-request blib/script/lwp-request
/home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/lwp-request
Manifying blib/man1/lwp-dump.1
Manifying blib/man1/lwp-mirror.1
Manifying blib/man1/lwp-download.1
Manifying blib/man1/lwp-rget.1
Manifying blib/man1/lwp-request.1
Manifying blib/man3/LWP::RobotUA.3
Manifying blib/man3/LWP::Authen::Ntlm.3
Manifying blib/man3/LWP.3
Manifying blib/man3/LWP::Protocol.3
Manifying blib/man3/HTTP::Request::Common.3
Manifying blib/man3/lwptut.3
Manifying blib/man3/HTTP::Message.3
Manifying blib/man3/HTML::Form.3
Manifying blib/man3/HTTP::Cookies::Netscape.3
Manifying blib/man3/Net::HTTP::NB.3
Manifying blib/man3/HTTP::Status.3
Manifying blib/man3/HTTP::Headers::Util.3
Manifying blib/man3/HTTP::Cookies::Microsoft.3
Manifying blib/man3/LWP::UserAgent.3
Manifying blib/man3/LWP::MemberMixin.3
Manifying blib/man3/LWP::Debug.3
Manifying blib/man3/Net::HTTP.3
Manifying blib/man3/HTTP::Daemon.3
Manifying blib/man3/HTTP::Cookies.3
Manifying blib/man3/LWP::ConnCache.3
Manifying blib/man3/File::Listing.3
Manifying blib/man3/WWW::RobotRules::AnyDBM_File.3
Manifying blib/man3/lwpcook.3
Manifying blib/man3/LWP::MediaTypes.3
Manifying blib/man3/HTTP::Date.3
Manifying blib/man3/WWW::RobotRules.3
Manifying blib/man3/HTTP::Request.3
Manifying blib/man3/HTTP::Negotiate.3
Manifying blib/man3/HTTP::Config.3
Manifying blib/man3/HTTP::Response.3
Manifying blib/man3/HTTP::Headers.3
Manifying blib/man3/LWP::Simple.3
Manifying blib/man3/Bundle::LWP.3
[MSG] [Sat Jan 22 04:47:40 2011] Sending test report for 'libwww-perl-5.837'
[MSG] [Sat Jan 22 04:47:40 2011] Ok, not sending test report
[MSG] [Sat Jan 22 04:47:41 2011] cp lib/Tie/Handle/HTTP.pm blib/lib/Tie/Handle/HTTP.pm
Manifying blib/man3/Tie::Handle::HTTP.3
[ERROR] [Sat Jan 22 04:47:42 2011] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-Tie-Handle-HTTP.t .. ok
t/09-file.t ............. ok
# Failed test 'Tie succeeded'
# at t/10-all.t line 38.
# Failed test 'not at end of file yet'
# at t/10-all.t line 39.
tell() on unopened filehandle FOO at t/Common.perl line 8.
# Failed test 'Start at 0'
# at t/Common.perl line 8.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 9.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 11.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
seek() on unopened filehandle FOO at t/Common.perl line 13.
# Failed test 'Seek success'
# at t/Common.perl line 13.
tell() on unopened filehandle FOO at t/Common.perl line 14.
# Failed test 'Seek to 0'
# at t/Common.perl line 14.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 16.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 18.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 20.
seek() on unopened filehandle FOO at t/Common.perl line 23.
# Failed test 'Seek success'
# at t/Common.perl line 23.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Looks like you failed 53 tests of 61.
t/10-all.t ..............
Dubious, test returned 53 (wstat 13568, 0x3500)
Failed 53/61 subtests
Test Summary Report
-------------------
t/10-all.t (Wstat: 13568 Tests: 61 Failed: 53)
Failed tests: 1-8, 10-17, 19-27, 29-36, 38-45, 47-55
57-59
Non-zero exit status: 53
Files=3, Tests=123, 1 wallclock secs ( 0.05 usr 0.00 sys + 0.23 cusr 0.08 csys = 0.36 CPU)
Result: FAIL
Failed 1/3 test programs. 53/123 subtests failed.
*** Error code 53
Stop.
make: stopped in /home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02
[MSG] [Sat Jan 22 04:47:42 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 6.57_05 0
HTTP::Daemon 5.827 0
HTTP::Request 5.827 0
HTTP::Response 5.836 0
HTTP::Status 5.817 0
LWP::UserAgent 5.835 0
Symbol 1.07 0
Test::More 0.97_01 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9010
CPANPLUS::Dist::Build 0.50
Cwd 3.34
ExtUtils::CBuilder 0.2802
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.57_05
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2207
File::Spec 3.33
Module::Build 0.3607
Test::Harness 3.22
Test::More 0.97_01
version 0.88
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.40
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 26388
PERL5_CPANPLUS_IS_VERSION = 0.9010
PERL5_MINISMOKEBOX = 0.40
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.13.7
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.13.7/bin/perl5.13.7
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 13 subversion 7) configuration:
Platform:
osname=netbsd, osvers=5.1_rc3, archname=amd64-netbsd-thread-multi
uname='netbsd fubar.bingosnet.co.uk 5.1_rc3 netbsd 5.1_rc3 (generic) #0: sat jun 12 20:26:01 utc 2010 builds@b8.netbsd.org:homebuildsabnetbsd-5-1-rc3amd64201006130031z-objhomebuildsabnetbsd-5-1-rc3srcsysarchamd64compilegeneric amd64 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.13.7 -Dusemallocwrap=y -Dusemymalloc=n -Dusethreads -Dusedevel'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
ccversion='', gccversion='4.1.3 20080704 prerelease (NetBSD nb2 20081120)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP PERL_USE_DEVEL
USE_64_BIT_ALL USE_64_BIT_INT USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under netbsd
Compiled at Nov 25 2010 16:20:33
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/arch:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/lib:/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="26388"
PERL5_CPANPLUS_IS_VERSION="0.9010"
PERL5_MINISMOKEBOX="0.40"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.13.7"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/lib
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Tagset-3.20/blib/arch
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/lib
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/HTML-Parser-3.68/blib/arch
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/lib
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/URI-1.56/blib/arch
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/lib
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/libwww-perl-5.837/blib/arch
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/lib
/home/cpan/pit/thr/conf/perl-5.13.7/.cpanplus/5.13.7/build/Tie-Handle-HTTP-0.02/blib/arch
/home/cpan/pit/thr/perl-5.13.7/lib/site_perl/5.13.7/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.13.7/lib/site_perl/5.13.7
/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7/amd64-netbsd-thread-multi
/home/cpan/pit/thr/perl-5.13.7/lib/5.13.7
.