Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL X11-Protocol-0.56 v5.8.9 FreeBSD
Date: 2011-04-29T12:02:40Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Stephen McCamant,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9104. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Apr 29 13:02:34 2011] Module 'X11::Protocol::Other' requires 'X11::Protocol' version '0' to be installed
[MSG] [Fri Apr 29 13:02:34 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/S/SM/SMCCAM/X11-Protocol-0.56.tar.gz'
[MSG] [Fri Apr 29 13:02:34 2011] Trying to get 'http://cpan.mirror.local/CPAN/authors/id/S/SM/SMCCAM/CHECKSUMS'
[MSG] [Fri Apr 29 13:02:34 2011] Checksum matches for 'X11-Protocol-0.56.tar.gz'
[MSG] [Fri Apr 29 13:02:36 2011] Extracted 'X11::Protocol' to '/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56'
[MSG] [Fri Apr 29 13:02:36 2011] CPANPLUS is prefering Build.PL
[MSG] [Fri Apr 29 13:02:36 2011] Checking if your kit is complete...
Looks good
Writing Makefile for X11::Protocol
[MSG] [Fri Apr 29 13:02:36 2011] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 29 13:02:36 2011] Checking for previous PASS result for "X11-Protocol-0.56"
[MSG] [Fri Apr 29 13:02:39 2011] cp Protocol.pm blib/lib/X11/Protocol.pm
cp Protocol/Ext/XC_MISC.pm blib/lib/X11/Protocol/Ext/XC_MISC.pm
cp Protocol/Ext/SHAPE.pm blib/lib/X11/Protocol/Ext/SHAPE.pm
cp Protocol/Ext/BIG_REQUESTS.pm blib/lib/X11/Protocol/Ext/BIG_REQUESTS.pm
cp Protocol/Connection/UNIXFH.pm blib/lib/X11/Protocol/Connection/UNIXFH.pm
cp Protocol/Connection/INETSocket.pm blib/lib/X11/Protocol/Connection/INETSocket.pm
cp Keysyms.pm blib/lib/X11/Keysyms.pm
cp Protocol/Ext/XFree86_Misc.pm blib/lib/X11/Protocol/Ext/XFree86_Misc.pm
cp Protocol/Connection/Socket.pm blib/lib/X11/Protocol/Connection/Socket.pm
cp Protocol/Constants.pm blib/lib/X11/Protocol/Constants.pm
cp Auth.pm blib/lib/X11/Auth.pm
cp Protocol/Connection/UNIXSocket.pm blib/lib/X11/Protocol/Connection/UNIXSocket.pm
cp Protocol/Ext/DPMS.pm blib/lib/X11/Protocol/Ext/DPMS.pm
cp Protocol/Ext/RENDER.pm blib/lib/X11/Protocol/Ext/RENDER.pm
cp Protocol/Connection/INETFH.pm blib/lib/X11/Protocol/Connection/INETFH.pm
cp Protocol/Connection.pm blib/lib/X11/Protocol/Connection.pm
cp Protocol/Connection/FileHandle.pm blib/lib/X11/Protocol/Connection/FileHandle.pm
Manifying blib/man3/X11::Protocol::Ext::SHAPE.3
Manifying blib/man3/X11::Protocol::Ext::XC_MISC.3
Manifying blib/man3/X11::Protocol.3
Manifying blib/man3/X11::Protocol::Ext::BIG_REQUESTS.3
Manifying blib/man3/X11::Protocol::Connection::UNIXFH.3
Manifying blib/man3/X11::Protocol::Connection::INETSocket.3
Manifying blib/man3/X11::Keysyms.3
Manifying blib/man3/X11::Protocol::Ext::XFree86_Misc.3
Manifying blib/man3/X11::Protocol::Connection::Socket.3
Manifying blib/man3/X11::Auth.3
Manifying blib/man3/X11::Protocol::Connection::UNIXSocket.3
Manifying blib/man3/X11::Protocol::Ext::DPMS.3
Manifying blib/man3/X11::Protocol::Ext::RENDER.3
Manifying blib/man3/X11::Protocol::Connection::INETFH.3
Manifying blib/man3/X11::Protocol::Connection.3
Manifying blib/man3/X11::Protocol::Connection::FileHandle.3
[ERROR] [Fri Apr 29 13:02:39 2011] MAKE TEST failed: PERL_DL_NONLAZY=1 /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..3
ok 1
Can't find DISPLAY -- guessing `unix:0' at test.pl line 32
Can't connect to display `unix:0': No such file or directory at blib/lib/X11/Protocol.pm line 2264
*** Error code 2
Stop in /usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56.
[MSG] [Fri Apr 29 13:02:39 2011] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9104
CPANPLUS::Dist::Build 0.56
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2206
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.88
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.62.
Powered by minismokebox version 0.44
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 47910
PERL5_CPANPLUS_IS_VERSION = 0.9104
PERL5_MINISMOKEBOX = 0.44
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=freebsd, osvers=9.0-current-201101, archname=amd64-freebsd
uname='freebsd flooble.bingosnet.co.uk 9.0-current-201101 freebsd 9.0-current-201101 #0: mon jan 3 22:15:39 utc 2011 root@farrell.cse.buffalo.edu:usrobjusrsrcsysgeneric amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under freebsd
Compiled at Apr 28 2011 23:17:46
%ENV:
PERL5LIB=":/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/lib:/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="47910"
PERL5_CPANPLUS_IS_VERSION="0.9104"
PERL5_MINISMOKEBOX="0.44"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/lib
/usr/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/X11-Protocol-0.56/blib/arch
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/amd64-freebsd
/usr/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.