Inline-C v0.81 Perl 5 v5.8.9 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.81
- Platform
- Perl 5 v5.8.9 x86_64-linux-thread-multi
- Date
- 2021-01-07 08:16:04
- ID
- 95d59c86-50c0-11eb-84bc-edd243e66a77
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tina Muller,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9908. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.8.9/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
Use of inherited AUTOLOAD for non-method main::foo1() is deprecated at (eval
51) line 1 (#1)
(D deprecated) As an (ahem) accidental feature, AUTOLOAD subroutines
are looked up as methods (using the @ISA hierarchy) even when the
subroutines to be autoloaded were called as plain functions (e.g.
Foo::bar()), not as methods (e.g. Foo->bar() or <
$obj-bar() >>).
This bug will be rectified in future by using method lookup only for
methods' AUTOLOADs. However, there is a significant base of existing
code that may be using the old behavior. So, as an interim step, Perl
currently issues an optional warning when non-methods use inherited
AUTOLOADs.
The simple rule is: Inheritance will not work when autoloading
non-methods. The simple fix for old code is: In any module that used
to depend on inheriting AUTOLOAD for non-methods from a base class
named BaseClass, execute *AUTOLOAD = \&BaseClass::AUTOLOAD during
startup.
In code that currently says use AutoLoader; @ISA = qw(AutoLoader);
you should remove AutoLoader from @ISA and change use AutoLoader; to
use AutoLoader 'AUTOLOAD';.
Use of inherited AUTOLOAD for non-method main::foo2() is deprecated at (eval
53) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo3() is deprecated at (eval
55) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo7() is deprecated at (eval
57) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo8() is deprecated at (eval
59) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo9() is deprecated at (eval
61) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo10() is deprecated at (eval
63) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo11() is deprecated at (eval
65) line 1 (#1)
Use of inherited AUTOLOAD for non-method main::foo12() is deprecated at (eval
67) line 1 (#1)
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
Warning: Use of "caller" without parentheses is ambiguous at t/TestInlineC.pm line 38.
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=36, Tests=161, 35 wallclock secs ( 0.10 usr 0.03 sys + 30.36 cusr 3.98 csys = 34.47 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.48 7.00
File::Copy::Recursive 0.45 0
File::Path 2.17 0
File::Spec 3.75 0.8
Inline 0.86 0.83
Parse::RecDescent 1.967015 1.967009
Pegex 0.75 0.66
Test::More 1.302181 0.88
Test::Warn 0.36 0.23
YAML::XS 0.82 0
autodie 2.32 0
version 0.9928 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9908
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.48
ExtUtils::Install 2.18
ExtUtils::MakeMaker 7.48
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.35
Pod::Simple 3.40
Test2 1.302181
Test::Harness 3.42
Test::More 1.302181
version 0.9928
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/3mn61egYub/lib/perl5:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 21975
PERL5_CPANPLUS_IS_VERSION = 0.9908
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/3mn61egYub
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/3mn61egYub"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/3mn61egYub
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=linux, osvers=5.4.12-1-lts, archname=x86_64-linux-thread-multi
uname='linux august 5.4.12-1-lts #2-alpine smp thu, 16 jan 2020 12:53:54 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.8.9 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe'
ccversion='', gccversion='9.2.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/../lib /usr/lib/../lib /lib /usr/lib
libs=-lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
USE_64_BIT_ALL USE_64_BIT_INT USE_FAST_STDIO
USE_ITHREADS USE_LARGE_FILES USE_PERLIO
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.82
Built under linux
Compiled at Jan 29 2020 01:55:57
%ENV:
PERL5LIB="/home/cpan/pit/jail/3mn61egYub/lib/perl5:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/lib:/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="21975"
PERL5_CPANPLUS_IS_VERSION="0.9908"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/3mn61egYub"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/3mn61egYub""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/3mn61egYub"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/cpan/pit/jail/3mn61egYub/lib/perl5/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/jail/3mn61egYub/lib/perl5/5.8.9
/home/cpan/pit/jail/3mn61egYub/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/3mn61egYub/lib/perl5
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/lib
/home/cpan/pit/thr/conf/perl-5.8.9/.cpanplus/5.8.9/build/vxtXWMxEf4/Inline-C-0.81/blib/arch
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/5.8.9
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.8.9/lib/site_perl/5.8.9
.