PMLTQ-Commands v2.0.3 Perl 5 v5.16.0 i386-netbsd-thread-multi-64int
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
PMLTQ-Commands v2.0.3
- Platform
- Perl 5 v5.16.0 i386-netbsd-thread-multi-64int
- Date
- 2019-12-05 09:14:09
- ID
- 982f7a6c-173f-11ea-99fe-b031dbec7dbf
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Matyas Kopp,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9178. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
# Failed test 'PMLTQ/Command/convert.pm loaded ok'
# at t/00-compile.t line 60.
# got: '512'
# expected: '0'
Can't locate PMLTQ/PML2BASE.pm in @INC (@INC contains: /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5 /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/0PtctTmXos/PMLTQ-3.0.2/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/0PtctTmXos/PMLTQ-3.0.2/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5 /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0 /home/cpan/pit/rel/perl-5.16.0/lib/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/rel/perl-5.16.0/lib/5.16.0 .) at /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib/PMLTQ/Command/convert.pm line 11.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib/PMLTQ/Command/convert.pm line 11.
Compilation failed in require at -e line 1.
# Failed test 'PMLTQ/Command/init.pm loaded ok'
# at t/00-compile.t line 60.
# got: '512'
# expected: '0'
Can't locate PMLTQ/PML2BASE.pm in @INC (@INC contains: /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5 /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/0PtctTmXos/PMLTQ-3.0.2/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/0PtctTmXos/PMLTQ-3.0.2/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0 /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5 /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch /home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0 /home/cpan/pit/rel/perl-5.16.0/lib/5.16.0/i386-netbsd-thread-multi-64int /home/cpan/pit/rel/perl-5.16.0/lib/5.16.0 .) at /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib/PMLTQ/Command/init.pm line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib/PMLTQ/Command/init.pm line 9.
Compilation failed in require at -e line 1.
# Looks like you failed 2 tests of 17.
t/00-compile.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/17 subtests
(less 1 skipped subtest: 14 okay)
Test Summary Report
-------------------
t/00-compile.t (Wstat: 512 Tests: 17 Failed: 2)
Failed tests: 4, 6
Non-zero exit status: 2
Files=1, Tests=17, 3 wallclock secs ( 0.02 usr 0.03 sys + 1.83 cusr 2.07 csys = 3.95 CPU)
Result: FAIL
Failed 1/1 test programs. 2/17 subtests failed.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
PMLTQ::PML2BASE
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Matyas Kopp (CENSORED)',
... # other information
PREREQ_PM => {
'PMLTQ::PML2BASE' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
File::ShareDir 1.116 1.00
File::Spec 3.75 0
Hash::Merge 0.300 0
IO::Handle 1.33 0
IPC::Open3 1.12 0
JSON 4.02 0
Module::Build 0.4229 0.3601
PMLTQ 3.0.2 v2.0.1
Term::Encoding 0.03 0
Term::UI 0.46 0
Test::More 1.302168 0
Test::Most 0.35 0
URI::Encode 1.1.1 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9178
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.38
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.38
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.51
Pod::Simple 3.20
Test2 1.302168
Test::Harness 3.42
Test::More 1.302168
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/script:/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = /home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 4869
PERL5_CPANPLUS_IS_VERSION = 0.9178
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/rel/conf/perl-5.16.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/rYIeQnGJ1d
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/rYIeQnGJ1d"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/rYIeQnGJ1d
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/rel/perl-5.16.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 16 subversion 0) configuration:
Platform:
osname=netbsd, osvers=8.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd naboo.bingosnet.co.uk 8.1 netbsd 8.1 (generic) #0: fri may 31 08:43:59 utc 2019 mkrepro@mkrepro.netbsd.org:usrsrcsysarchi386compilegeneric i386 '
config_args='-des -Dprefix=/home/cpan/pit/rel/perl-5.16.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
optimize='-O',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
ccversion='', gccversion='5.5.0', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -L/usr/pkg/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.64
Built under netbsd
Compiled at Aug 4 2019 06:50:39
%ENV:
PERL5LIB="/home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib:/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="4869"
PERL5_CPANPLUS_IS_VERSION="0.9178"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/rel/conf/perl-5.16.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/rYIeQnGJ1d"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/rYIeQnGJ1d""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/rYIeQnGJ1d"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0/i386-netbsd-thread-multi-64int
/home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/5.16.0
/home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5/i386-netbsd-thread-multi-64int
/home/cpan/pit/jail/rYIeQnGJ1d/lib/perl5
/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/lib
/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/2GBBXJeUHc/URI-Encode-v1.1.1/blib/arch
/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/lib
/home/cpan/pit/rel/conf/perl-5.16.0/.cpanplus/5.16.0/build/PYh1W9cYLL/PMLTQ-Commands-2.0.3/blib/arch
/home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0/i386-netbsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.16.0/lib/site_perl/5.16.0
/home/cpan/pit/rel/perl-5.16.0/lib/5.16.0/i386-netbsd-thread-multi-64int
/home/cpan/pit/rel/perl-5.16.0/lib/5.16.0
.