Inline-C v0.82_001 Perl 5 v5.32.0 i686-linux
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.82_001
- Platform
- Perl 5 v5.32.0 i686-linux
- Date
- 2022-03-17 13:03:10
- ID
- 9879d29e-a5f2-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ETJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.32.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have Where Howbig
# ----------------------- ---- ---- ---------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 109336
# File::ShareDir::Install 0.06 0.13 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 11192
#
# === Build Requires ===
#
# Module Want Have Where Howbig
# ------------------- ---- ---- ---------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 109336
#
# === Test Requires ===
#
# Module Want Have Where Howbig
# --------------------- ---- -------- --------------------------------------------------------------- ------
# File::Copy::Recursive any 0.45 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 27561
# File::Path any 2.18 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 43254
# File::Temp 0.19 0.2311 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 118877
# Test::More 0.88 1.302188 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 52981
# Test::Warn 0.23 0.36 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 15895
# YAML::XS any 0.83 /home/cpan/pit/jail/QrWwKS877m/lib/perl5/i686-linux 3593
# autodie any 2.32 /home/cpan/pit/bare/perl-5.32.0/lib/5.32.0 12526
# version 0.77 0.9929 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0/i686-linux 3549
#
# === Runtime Requires ===
#
# Module Want Have Where Howbig
# ------------------- -------- -------- ----------------------------------------------------- ------
# ExtUtils::MakeMaker 7.00 7.62 /home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0 109336
# File::Spec 0.8 3.78 /home/cpan/pit/bare/perl-5.32.0/lib/5.32.0/i686-linux 10571
# Inline 0.86 0.86 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 62663
# Parse::RecDescent 1.967009 1.967015 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 222044
# Pegex 0.66 0.75 /home/cpan/pit/jail/QrWwKS877m/lib/perl5 750
#
t/00-report-prereqs.t .............. ok
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
Use of uninitialized value in numeric eq (==) at
/home/cpan/pit/bare/perl-5.32.0/lib/5.32.0/i686-linux/IO/Select.pm line 71 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you
the name of the variable (if any) that was undefined. In some cases
it cannot do this, so it also tells you what operation you used the
undefined value in. Note, however, that perl optimizes your program
and the operation displayed in the warning may not necessarily appear
literally in your program. For example, "that $foo" is usually
optimized into "that " . $foo, and the warning will refer to the
concatenation (.) operator, even though there is no . in
your program.
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=37, Tests=162, 49 wallclock secs ( 0.09 usr 0.01 sys + 43.24 cusr 4.87 csys = 48.21 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.62 7.00
File::Copy::Recursive 0.45 0
File::Path 2.18 0
File::Spec 3.78 0.8
File::Temp 0.2311 0.19
Inline 0.86 0.86
Parse::RecDescent 1.967015 1.967009
Pegex 0.75 0.66
Test::More 1.302188 0.88
Test::Warn 0.36 0.23
YAML::XS 0.83 0
autodie 2.32 0
version 0.9929 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.40
File::Spec 3.78
Module::Build 0.4231
Pod::Parser 0
Pod::Simple 3.40
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/QrWwKS877m/lib/perl5:/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/lib:/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 32090
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.32.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/QrWwKS877m
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/QrWwKS877m"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/QrWwKS877m
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.32.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 32 subversion 0) configuration:
Platform:
osname=linux
osvers=4.19.0-9-686
archname=i686-linux
uname='linux dagobah 4.19.0-9-686 #1 smp debian 4.19.118-2+deb10u1 (2020-06-07) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.32.0'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=undef
use64bitall=undef
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='8.3.0'
gccosandvers=''
intsize=4
longsize=4
ptrsize=4
doublesize=8
byteorder=1234
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=12
longdblkind=3
ivtype='long'
ivsize=4
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=4
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/i686-linux-gnu/8/include-fixed /usr/include/i386-linux-gnu /usr/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /lib64 /usr/lib64
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.28.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.28'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jun 21 2020 16:58:21
%ENV:
PERL5LIB="/home/cpan/pit/jail/QrWwKS877m/lib/perl5:/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/lib:/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="32090"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.32.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/QrWwKS877m"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/QrWwKS877m""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/QrWwKS877m"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/QrWwKS877m/lib/perl5/5.32.0/i686-linux
/home/cpan/pit/jail/QrWwKS877m/lib/perl5/5.32.0
/home/cpan/pit/jail/QrWwKS877m/lib/perl5/i686-linux
/home/cpan/pit/jail/QrWwKS877m/lib/perl5
/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/lib
/home/cpan/pit/bare/conf/perl-5.32.0/.cpanplus/5.32.0/build/_B2_2iKmro/Inline-C-0.82_001/blib/arch
/home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0/i686-linux
/home/cpan/pit/bare/perl-5.32.0/lib/site_perl/5.32.0
/home/cpan/pit/bare/perl-5.32.0/lib/5.32.0/i686-linux
/home/cpan/pit/bare/perl-5.32.0/lib/5.32.0