Net-Async-Github v0.012 Perl 5 v5.36.0 x86_64-linux-ld
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Net-Async-Github v0.012
- Platform
- Perl 5 v5.36.0 x86_64-linux-ld
- Date
- 2023-11-01 10:51:26
- ID
- 9ab4eaae-78a4-11ee-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TEAM,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Net-Async-Github/endpoints.json (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.36.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-check-deps.t ...... ok
# Failed test 'Net/Async/Github.pm loaded ok'
# at t/00-compile.t line 53.
# got: '512'
# expected: '0'
Can't locate JSON/MaybeUTF8.pm in @INC (you may need to install the JSON::MaybeUTF8 module) (@INC contains: /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0 /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0 /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5 /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0 /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/x86_64-linux-ld /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5 /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch /home/cpan/pit/bare-ld/perl-5.36.0/lib/site_perl/5.36.0/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.36.0/lib/site_perl/5.36.0 /home/cpan/pit/bare-ld/perl-5.36.0/lib/5.36.0/x86_64-linux-ld /home/cpan/pit/bare-ld/perl-5.36.0/lib/5.36.0 .) at /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib/Net/Async/Github.pm line 71.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib/Net/Async/Github.pm line 71.
Compilation failed in require at -e line 1.
# Looks like you failed 1 test of 11.
t/00-compile.t .........
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/11 subtests
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have
# ----------------------- ---- ----
# ExtUtils::MakeMaker any 7.70
# File::ShareDir::Install 0.06 0.14
#
# === Build Requires ===
#
# Module Want Have
# ------------------- ---- ----
# ExtUtils::MakeMaker any 7.70
#
# === Test Requires ===
#
# Module Want Have
# ------------------- ----- --------
# ExtUtils::MakeMaker any 7.70
# File::Spec any 3.84
# IO::Handle any 1.48
# IPC::Open3 any 1.22
# Test::CheckDeps 0.010 0.010
# Test::More 0.94 1.302195
#
# === Test Recommends ===
#
# Module Want Have
# ---------- -------- --------
# CPAN::Meta 2.120900 2.150010
#
# === Runtime Requires ===
#
# Module Want Have
# --------------------- -------- --------
# Adapter::Async any 0.019
# Cache::LRU 0.04 0.04
# Dir::Self any 0.11
# File::ShareDir 1.118 1.118
# Future 0.47 0.50
# IO::Async::Notifier 0.78 0.802
# IO::Async::SSL 0.22 0.25
# JSON::MaybeXS 1.004003 1.004005
# Log::Any 1.709 1.717
# Net::Async::HTTP 0.48 0.49
# Net::Async::WebSocket any 0.13
# Path::Tiny 0.118 0.144
# Ryu 2.007 3.004
# Ryu::Async 0.019 0.020
# Syntax::Keyword::Try 0.21 0.29
# Time::Moment 0.44 0.44
# URI 5.09 5.21
# URI::Template 0.24 0.24
# Variable::Disposition any 0.004
# indirect any 0.39
#
t/00-report-prereqs.t .. ok
Test Summary Report
-------------------
t/00-compile.t (Wstat: 256 (exited 1) Tests: 11 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=3, Tests=41, 1 wallclock secs ( 0.01 usr 0.01 sys + 0.50 cusr 0.13 csys = 0.65 CPU)
Result: FAIL
Failed 1/3 test programs. 1/41 subtests failed.
make: *** [Makefile:970: test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
JSON::MaybeUTF8
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'TEAM (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'JSON::MaybeUTF8' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Adapter::Async 0.019 0
Cache::LRU 0.04 0.04
Dir::Self 0.11 0
ExtUtils::MakeMaker 7.70 0
File::ShareDir 1.118 1.118
File::Spec 3.84 0
Future 0.50 0.47
IO::Async::Notifier 0.802 0.78
IO::Async::SSL 0.25 0.22
IO::Handle 1.48 0
IPC::Open3 1.22 0
JSON::MaybeXS 1.004005 1.004003
Log::Any 1.717 1.709
Net::Async::HTTP 0.49 0.48
Net::Async::WebSocket 0.13 0
Path::Tiny 0.144 0.118
Ryu 3.004 2.007
Ryu::Async 0.020 0.019
Syntax::Keyword::Try 0.29 0.21
Test::CheckDeps 0.010 0.010
Test::More 1.302195 0.94
Time::Moment 0.44 0.44
URI 5.21 5.09
URI::Template 0.24 0.24
Variable::Disposition 0.004 0
indirect 0.39 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.84
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.45
File::Spec 3.84
Module::Build 0.4234
Pod::Parser 0
Pod::Simple 3.43
Test2 1.302195
Test::Harness 3.44
Test::More 1.302195
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/F1HFEiOPrj/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 97574
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.36.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/F1HFEiOPrj
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/F1HFEiOPrj"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/F1HFEiOPrj
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.36.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 36 subversion 0) configuration:
Platform:
osname=linux
osvers=5.4.0-113-generic
archname=x86_64-linux-ld
uname='linux uchder 5.4.0-113-generic #127-ubuntu smp wed may 18 14:30:56 utc 2022 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.36.0 -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='9.4.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at May 31 2022 11:36:31
%ENV:
PERL5LIB="/home/cpan/pit/jail/F1HFEiOPrj/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="97574"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.36.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/F1HFEiOPrj"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/F1HFEiOPrj""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/F1HFEiOPrj"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0/x86_64-linux-ld
/home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/5.36.0
/home/cpan/pit/jail/F1HFEiOPrj/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/F1HFEiOPrj/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.36.0/.cpanplus/5.36.0/build/tSn0zaPMYy/Net-Async-Github-0.012/blib/arch
/home/cpan/pit/bare-ld/perl-5.36.0/lib/site_perl/5.36.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.36.0/lib/site_perl/5.36.0
/home/cpan/pit/bare-ld/perl-5.36.0/lib/5.36.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.36.0/lib/5.36.0