Class-DBI-DDL v1.01 Perl 5 v5.12.0 i386-freebsd-thread-multi-64int
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
Class-DBI-DDL v1.01
- Platform
- Perl 5 v5.12.0 i386-freebsd-thread-multi-64int
- Date
- 2010-04-21 05:27:46
- ID
- 9e37b518-4d06-11df-862b-995f90befd91
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear HANENKAMP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9003. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Apr 21 06:27:43 2010] Trying to get 'http://cpan.hexten.net/authors/id/H/HA/HANENKAMP/Class-DBI-DDL/CHECKSUMS'
[MSG] [Wed Apr 21 06:27:43 2010] Checksum matches for 'Class-DBI-DDL-1.01.tar.gz'
[MSG] [Wed Apr 21 06:27:44 2010] Extracted 'Class::DBI::DDL' to '/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01'
[MSG] [Wed Apr 21 06:27:44 2010] CPANPLUS is prefering Build.PL
[MSG] [Wed Apr 21 06:27:44 2010] Loading YACSmoke database "/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/cpansmoke.dat"
[MSG] [Wed Apr 21 06:27:44 2010] Checking if your kit is complete...
Looks good
Writing Makefile for Class::DBI::DDL
[MSG] [Wed Apr 21 06:27:44 2010] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Apr 21 06:27:44 2010] Checking for previous PASS result for "Class-DBI-DDL-1.01"
[MSG] [Wed Apr 21 06:27:45 2010] cp lib/Class/DBI/DDL/mysql.pm blib/lib/Class/DBI/DDL/mysql.pm
cp lib/Class/DBI/DDL/Pg.pm blib/lib/Class/DBI/DDL/Pg.pm
cp lib/Class/DBI/DDL.pm blib/lib/Class/DBI/DDL.pm
Manifying blib/man3/Class::DBI::DDL::mysql.3
Manifying blib/man3/Class::DBI::DDL::Pg.3
Manifying blib/man3/Class::DBI::DDL.3
[ERROR] [Wed Apr 21 06:27:46 2010] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/home/cpan/pit/rel/perl-5.12.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch /usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0 .).
at /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9
BEGIN failed--compilation aborted at /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9.
Compilation failed in require at (eval 5) line 2.
...propagated at /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0/base.pm line 94.
BEGIN failed--compilation aborted at t/mysql.t line 5.
t/mysql.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Base class package "Class::Data::Inheritable" is empty.
(Perhaps you need to 'use' the module which defines that package first,
or make that module available in @INC (@INC contains: /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch /usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0 /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0 .).
at /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9
BEGIN failed--compilation aborted at /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib/Class/DBI/DDL.pm line 9.
Compilation failed in require at (eval 5) line 2.
...propagated at /usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0/base.pm line 94.
BEGIN failed--compilation aborted at t/Pg.t line 5.
t/Pg.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Test Summary Report
-------------------
t/mysql.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/Pg.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=2, Tests=0, 1 wallclock secs ( 0.05 usr 0.04 sys + 0.07 cusr 0.05 csys = 0.21 CPU)
Result: FAIL
Failed 2/2 test programs. 0/0 subtests failed.
*** Error code 255
Stop in /usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01.
[MSG] [Wed Apr 21 06:27:46 2010] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9003
CPANPLUS::Dist::Build 0.46
Cwd 3.31
ExtUtils::CBuilder 0.2703
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.56
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2205
File::Spec 3.31
Module::Build 0.3607
Test::Harness 3.21
Test::More 0.94
version 0.82
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.54.
Powered by minismokebox version 0.26
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = :/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 72526
PERL5_CPANPLUS_IS_VERSION = 0.9003
PERL5_MINISMOKEBOX = 0.26
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/rel/conf/perl-5.12.0/
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/rel/perl-5.12.0/bin/perl
UID: $< = 1003
EUID: $> = 1003
GID: $( = 1003 1003 1003
EGID: $) = 1003 1003 1003
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 0) configuration:
Platform:
osname=freebsd, osvers=7.2-release, archname=i386-freebsd-thread-multi-64int
uname='freebsd wintermute.staffordshire.gov.uk 7.2-release freebsd 7.2-release #0: fri may 1 08:49:13 utc 2009 root@walker.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
config_args='-de -Dprefix=/usr/home/cpan/pit/rel/perl-5.12.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lgdbm -lm -lcrypt
perllibs=-lm -lcrypt
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under freebsd
Compiled at Apr 18 2010 11:43:19
%ENV:
PERL5LIB=":/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="72526"
PERL5_CPANPLUS_IS_VERSION="0.9003"
PERL5_MINISMOKEBOX="0.26"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/rel/conf/perl-5.12.0/"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/lib
/usr/home/cpan/pit/rel/conf/perl-5.12.0/.cpanplus/5.12.0/build/Class-DBI-DDL-1.01/blib/arch
/usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.12.0/lib/site_perl/5.12.0
/usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0/i386-freebsd-thread-multi-64int
/usr/home/cpan/pit/rel/perl-5.12.0/lib/5.12.0
.