Report for Acme-PriPara-0.02

Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: PASS Acme-PriPara-0.02 v5.20.2 NetBSD
Date: 2015-07-06T17:30:00Z

This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear HTK,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9154. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

TEST RESULTS:

Below is the error stack from stage 'make test':

t/00_compile.t ..... ok
t/01_characters.t .. ok
t/02_team.t ........ ok
All tests successful.
Files=3, Tests=10,  0 wallclock secs ( 0.05 usr  0.02 sys +  0.17 cusr  0.12 csys =  0.36 CPU)
Result: PASS


PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  Data::Section::Simple              0.07        0
	  Mouse                             2.4.2        0
	  Readonly                           2.00        0
	  Test::More                     1.001014     0.98
	  YAML::Tiny                         1.67        0

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9154
	CPANPLUS::Dist::Build              0.78
	Cwd                             3.48_01
	ExtUtils::CBuilder             0.280223
	ExtUtils::Command                  1.18
	ExtUtils::Install                  2.04
	ExtUtils::MakeMaker                7.04
	ExtUtils::Manifest                 1.70
	ExtUtils::ParseXS                  3.24
	File::Spec                      3.48_01
	Module::Build                    0.4214
	Pod::Parser                        1.62
	Pod::Simple                        3.28
	Test::Harness                      3.35
	Test::More                     1.001014
	version                          0.9912

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 17306
    PERL5_CPANPLUS_IS_VERSION = 0.9154
    PERL5_MINISMOKEBOX = 0.58
    PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.20.2
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/pit/bare/perl-5.20.2/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
   
  Platform:
    osname=netbsd, osvers=6.1.4, archname=amd64-netbsd
    uname='netbsd naboo.bingosnet.co.uk 6.1.4 netbsd 6.1.4 (generic) amd64 '
    config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.20.2'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/pkg/include'
    ccversion='', gccversion='4.5.3', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -fstack-protector -L/usr/pkg/lib'
    libpth=/usr/include/gcc-4.5 /usr/lib /usr/pkg/lib /lib
    libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
    perllibs=-lm -lcrypt -lutil -lc -lposix
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
                        PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
                        PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
                        USE_64_BIT_ALL USE_64_BIT_INT USE_LARGE_FILES
                        USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
                        USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
  Locally applied patches:
	Devel::PatchPerl 1.34
  Built under netbsd
  Compiled at Jun  8 2015 11:37:51
  %ENV:
    PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/arch:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/lib:/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="17306"
    PERL5_CPANPLUS_IS_VERSION="0.9154"
    PERL5_MINISMOKEBOX="0.58"
    PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.20.2"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Config-0.008/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-Helpers-0.022/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/ExtUtils-InstallPaths-0.011/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Module-Build-Tiny-0.039/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Requires-0.08/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-Section-Simple-0.07/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Uplevel-0.25/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Exception-0.40/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Try-Tiny-0.22/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Fatal-0.014/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-LeakTrace-0.15/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Capture-Tiny-0.30/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Params-Util-1.07/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Install-0.928/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Data-OptList-0.109/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Sub-Exporter-0.987/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Test-Output-1.03/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Mouse-2.4.2/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Readonly-2.00/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/YAML-Tiny-1.67/blib/arch
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/lib
    /home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/Acme-PriPara-0.02/blib/arch
    /home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2/amd64-netbsd
    /home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2
    /home/cpan/pit/bare/perl-5.20.2/lib/5.20.2/amd64-netbsd
    /home/cpan/pit/bare/perl-5.20.2/lib/5.20.2
    .