Inline-C v0.79_001 Perl 5 v5.8.8 x86_64-linux
- Status
- Na
- From
- Andreas J. König (ANDK)
- Dist
-
Inline-C v0.79_001
- Platform
- Perl 5 v5.8.8 x86_64-linux
- Date
- 2019-01-21 21:43:46
- ID
- a1476ab6-1dc5-11e9-b1f2-b12404afc1fa
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tina Muller,
This is a computer-generated report for Inline-C-0.79_001
on perl 5.8.8, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/bin/perl Makefile.PL':
Perl v5.10.0 required--this is only v5.8.8, stopped at Makefile.PL line 5.
BEGIN failed--compilation aborted at Makefile.PL line 5.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
configure_requires:
Module Need Have
----------------------- ---- ----
ExtUtils::MakeMaker 0 7.34
File::ShareDir::Install 0.06 0.13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL = /home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/bin/perl
PERL5LIB = /tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/arch:/tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/lib
PERL5OPT = -I/tmp/CPAN-Reporter-lib-zlub -MDevel::Autoflush
PERL5_CPANPLUS_IS_RUNNING = 20590
PERL5_CPAN_IS_EXECUTING = /tmp/loop_over_bdir-28597-cQXDI6/Inline-C-0.79_001-0/Makefile.PL
PERL5_CPAN_IS_RUNNING = 20590
PERL_AUTOINSTALL = --defaultdeps
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.21
CPAN::Meta 2.150010
Cwd 3.75
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.35
File::Spec 3.75
JSON 4.00
JSON::PP 2.97001
Module::Build 0.4224
Module::Signature 0.83
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302140
YAML 1.27
YAML::Syck 1.31
version 0.9924
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=4.9.0-8-amd64, archname=x86_64-linux
uname='linux k93stretch 4.9.0-8-amd64 #1 smp debian 4.9.130-2 (2018-10-27) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6 -Dmyhostname=k93stretch -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Uuselongdouble -Doptimize=-g'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='6.3.0 20170516', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Nov 14 2018 03:14:46
%ENV:
PERL="/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/bin/perl"
PERL5LIB="/tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/arch:/tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="20590"
PERL5_CPAN_IS_EXECUTING="/tmp/loop_over_bdir-28597-cQXDI6/Inline-C-0.79_001-0/Makefile.PL"
PERL5_CPAN_IS_RUNNING="20590"
PERL_AUTOINSTALL="--defaultdeps"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/arch
/tmp/loop_over_bdir-28597-cQXDI6/File-ShareDir-Install-0.13-0/blib/lib
/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/lib/5.8.8/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/lib/5.8.8
/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/lib/site_perl/5.8.8/x86_64-linux
/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/lib/site_perl/5.8.8
/home/sand/src/perl/repoperls/installed-perls/host/k93stretch/perl-5.8.8/21a6/lib/site_perl
.