AtteanX-Parser-JSONLD v0.001 Perl 5 v5.14.1 i386-freebsd-thread-multi-64int

Status
Na
From
Chris Williams (BINGOS)
Dist
AtteanX-Parser-JSONLD v0.001
Platform
Perl 5 v5.14.1 i386-freebsd-thread-multi-64int
Date
2020-01-29 13:59:57
ID
a1f9ef9c-429f-11ea-99fe-b031dbec7dbf
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language.  See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org


--

Dear GWILLIAMS,

This is a computer-generated error report created automatically by
CPANPLUS, version 0.9904. Testers personal comments may appear
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/rel/perl-5.14.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
Perl v5.18.0 required--this is only v5.14.1, stopped at /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib/AtteanX/Parser/JSONLD.pm line 43.
BEGIN failed--compilation aborted at /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib/AtteanX/Parser/JSONLD.pm line 43.
Compilation failed in require at /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1/Module/Load.pm line 77.
Can't locate AtteanX/Parser/JSONLD in @INC (@INC contains: /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/inc /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/arch /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1 /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1 /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5 /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1 /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5 /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/arch /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1 /usr/home/cpan/pit/rel/perl-5.14.1/lib/5.14.1/i386-freebsd-thread-multi-64int /usr/home/cpan/pit/rel/perl-5.14.1/lib/5.14.1 .) at /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1/Module/Load.pm line 77.
    # No tests run!

#   Failed test 'No tests run for subtest "parser construction and metadata"'
#   at t/parser.t line 17.
Can't call method "new" on an undefined value at t/parser.t line 12.

#   Failed test 'no (unexpected) warnings (via END block)'
#   at /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1/Test/Builder.pm line 147.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 2.
t/parser.t .. 
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests 

Test Summary Report
-------------------
t/parser.t (Wstat: 65280 Tests: 2 Failed: 2)
  Failed tests:  1-2
  Non-zero exit status: 255
  Parse errors: No plan found in TAP output
Files=1, Tests=2,  2 wallclock secs ( 0.02 usr  0.02 sys +  1.20 cusr  0.79 csys =  2.03 CPU)
Result: FAIL
Failed 1/1 test programs. 2/2 subtests failed.
*** Error code 255

Stop.
make: stopped in /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001

[MSG] [Wed Jan 29 13:59:55 2020] 'AtteanX::Parser::JSONLD' requires a higher version of perl than your current version -- sending N/A grade.

PREREQUISITES:

Here is a list of prerequisites you specified and versions we
managed to load:

	  Module Name                        Have     Want
	  Attean                            0.025        0
	  ExtUtils::MakeMaker                7.44     6.59
	  JSON                               4.02     4.02
	  JSONLD                            0.002    0.001
	  Test::Exception                    0.43        0
	  Test::Modern                      0.013    0.012
	  Test::More                     1.302170     0.88

Perl module toolchain versions installed:
	Module Name                        Have
	CPANPLUS                         0.9904
	CPANPLUS::Dist::Build              0.90
	Cwd                                3.75
	ExtUtils::CBuilder             0.280231
	ExtUtils::Command                  7.44
	ExtUtils::Install                  2.14
	ExtUtils::MakeMaker                7.44
	ExtUtils::Manifest                 1.72
	ExtUtils::ParseXS                  3.35
	File::Spec                         3.75
	Module::Build                    0.4229
	Pod::Parser                        1.37
	Pod::Simple                        3.16
	Test2                          1.302170
	Test::Harness                      3.42
	Test::More                     1.302170
	version                          0.9924

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:


This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68

CPANPLUS is prefering Build.PL

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    NONINTERACTIVE_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5:/usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/arch
    PERL5_CPANPLUS_IS_RUNNING = 72389
    PERL5_CPANPLUS_IS_VERSION = 0.9904
    PERL5_MINISMOKEBOX = 0.68
    PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/rel/conf/perl-5.14.1
    PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
    PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/bVxk1zw18n
    PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/bVxk1zw18n"
    PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/bVxk1zw18n
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/pit/rel/perl-5.14.1/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1002 1002
    EGID: $)  = 1002 1002


-------------------------------


--

Summary of my perl5 (revision 5 version 14 subversion 1) configuration:
   
  Platform:
    osname=freebsd, osvers=11.3-release-p1, archname=i386-freebsd-thread-multi-64int
    uname='freebsd froggle 11.3-release-p1 freebsd 11.3-release-p1 #0: tue jul 23 18:16:36 utc 2019 root@amd64-builder.daemonology.net:usrobjusrsrcsysgeneric i386 '
    config_args='-des -Dprefix=/usr/home/cpan/pit/rel/perl-5.14.1 -Dusethreads -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
    optimize='-O2',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.2.1 Compatible FreeBSD Clang 8.0.0 (tags/RELEASE_800/final 356365)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -fstack-protector -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lgdbm -ldl -lm -lcrypt -lutil
    perllibs=-ldl -lm -lcrypt -lutil
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib -fstack-protector'


Characteristics of this binary (from libperl): 
  Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
                        PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
                        PERL_PRESERVE_IVUV USE_64_BIT_INT USE_ITHREADS
                        USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
                        USE_REENTRANT_API
  Locally applied patches:
	Devel::PatchPerl 1.64
  Built under freebsd
  Compiled at Aug  3 2019 01:03:44
  %ENV:
    PERL5LIB="/usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5:/usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib:/usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/arch"
    PERL5_CPANPLUS_IS_RUNNING="72389"
    PERL5_CPANPLUS_IS_VERSION="0.9904"
    PERL5_MINISMOKEBOX="0.68"
    PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/rel/conf/perl-5.14.1"
    PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
    PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/bVxk1zw18n"
    PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/bVxk1zw18n""
    PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/bVxk1zw18n"
    PERL_MM_USE_DEFAULT="1"
  @INC:
    /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1/i386-freebsd-thread-multi-64int
    /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/5.14.1
    /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5/i386-freebsd-thread-multi-64int
    /usr/home/cpan/pit/jail/bVxk1zw18n/lib/perl5
    /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/lib
    /usr/home/cpan/pit/rel/conf/perl-5.14.1/.cpanplus/5.14.1/build/61OG51ySJm/AtteanX-Parser-JSONLD-0.001/blib/arch
    /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1/i386-freebsd-thread-multi-64int
    /usr/home/cpan/pit/rel/perl-5.14.1/lib/site_perl/5.14.1
    /usr/home/cpan/pit/rel/perl-5.14.1/lib/5.14.1/i386-freebsd-thread-multi-64int
    /usr/home/cpan/pit/rel/perl-5.14.1/lib/5.14.1
    .