Back
From: metabase:user:e83797c6-6da0-1014-84df-33ea7e0f01d3
Subject: PASS AnyEvent-SIP-0.002 v5.10.1 GNU/Linux
Date: 2013-09-01T19:06:44Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Sawyer X,
This is a computer-generated report for AnyEvent-SIP-0.002
on perl 5.10.1, created by CPAN-Reporter-1.2010.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
t/00-compile.t .......................... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite-anyevent.t ....... ok
# call created
# got ringing
# call established
# call cleaned up
t/02_listen_and_invite.t ................ ok
t/03_forward_stateless.t ................ ok
# UAS on 127.0.0.1:43296
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 100/100 packets
t/04_call_with_rtp.t .................... ok
# UAS on 127.0.0.1:34366
# UAC on 127.0.0.1:33224
# PROXY on 127.0.0.1:36117 127.0.0.1:57137
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(INVITE) SDP: audio=127.0.0.1:4280/2
# <<
# proxy >> I< 127.0.0.1:33224 REQ(INVITE) SDP: audio=127.0.0.1:4280/2
# <<
# proxy >> O> udp:127.0.0.1:34366 REQ(INVITE) SDP: audio=127.0.0.1:4280/2
# <<
# uas >> I< 127.0.0.1:57137 REQ(INVITE) SDP: audio=127.0.0.1:4280/2
# <<
# uas >> O> 127.0.0.1:57137 RSP(INVITE,100) NO SDP
# <<
# uas >> call created
# INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:57137;branch=z9hG4bK1e19ba55f9d46202c751d6435a93ee8fd2c6bf5c5b643a21bc1514043beaec1e
# Record-route: <sip:127.0.0.1:57137;lr>
# Via: SIP/2.0/UDP 127.0.0.1:36117;branch=z9hG4bK394b61f7b2e55c8caf85d432278cb5d8d2c6bf5c5b643a21bc1514043beaec1e
# Record-route: <sip:127.0.0.1:36117;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:33224;branch=z9hG4bKbb27960282c8c3a54bc5c7092447042fd2c6bf5c5b643a21bc1514043beaec1e
# Call-id: f41ae515907acdb224175ce2d2e23869
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=9b0b672e229aef4f13e93ab7d9e78a99
# Content-type: application/sdp
# Content-length: 175
# Max-forwards: 69
# Contact: sip:r095d1a470757720006564c53480516030b57520303077f2266287034@127.0.0.1:57137
# To: you.uas@example.com;tag=27ad75270f743d4a59fd7034ac7ac6cb
#
# v=0
# o=anonymous 1378062356 1378062356 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 4280 RTP/AVP 0 101
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# O> 127.0.0.1:57137 RSP(INVITE,200) SDP: audio=127.0.0.1:8082/2
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,200) SDP: audio=127.0.0.1:8082/2
# <<
# uac >> O> 127.0.0.1:36117 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> I< 127.0.0.1:57137 REQ(ACK) NO SDP
# call established
# <<
# uas >> I< 127.0.0.1:57137 REQ(BYE) NO SDP
# <<
# uas >> O> 127.0.0.1:57137 RSP(BYE,200) NO SDP
# <<
# uas >> call cleaned up
# <<
# uas >> received 100/100 packets
# RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(BYE) NO SDP
# I< 127.0.0.1:36117 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# proxy >> OK
# <<
# uas >> OK
# <<
# proxy >> ready
# <<
# uas >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(INVITE) SDP: audio=127.0.0.1:3232/2
# <<
# proxy >> I< 127.0.0.1:33224 REQ(INVITE) SDP: audio=127.0.0.1:3232/2
# <<
# proxy >> O> udp:127.0.0.1:34366 REQ(INVITE) SDP: audio=127.0.0.1:7188/2
# <<
# uas >> I< 127.0.0.1:57137 REQ(INVITE) SDP: audio=127.0.0.1:7188/2
# <<
# uas >> O> 127.0.0.1:57137 RSP(INVITE,100) NO SDP
# <<
# uas >> call created
# <<
# uas >> INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:57137;branch=z9hG4bK1e19ba55f9d46202c751d6435a93ee8f513de439698c2d881dd022f953468415
# Record-route: <sip:127.0.0.1:57137;lr>
# Via: SIP/2.0/UDP 127.0.0.1:36117;branch=z9hG4bK394b61f7b2e55c8caf85d432278cb5d8513de439698c2d881dd022f953468415
# Record-route: <sip:127.0.0.1:36117;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:33224;branch=z9hG4bKbb27960282c8c3a54bc5c7092447042f513de439698c2d881dd022f953468415
# Call-id: d440746b8f3df674c9456868247085b2
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=1d43dc901b52691f05c29bfc1d6e966b
# Content-type: application/sdp
# Content-length: 175
# Max-forwards: 69
# Contact: sip:r095d1a470757720006564c53480516030b57520303077f2266287034@127.0.0.1:57137
# To: you.uas@example.com;tag=434c6a0789336a94c6788dc460791d71
#
# v=0
# o=anonymous 1378062359 1378062359 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 7188 RTP/AVP 0 101
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,200) SDP: audio=127.0.0.1:11194/2
# <<
# uac >> O> 127.0.0.1:36117 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> O> 127.0.0.1:57137 RSP(INVITE,200) SDP: audio=127.0.0.1:8782/2
# I< 127.0.0.1:57137 REQ(ACK) NO SDP
# call established
# <<
# uas >> I< 127.0.0.1:57137 REQ(BYE) NO SDP
# <<
# uas >> O> 127.0.0.1:57137 RSP(BYE,200) NO SDP
# <<
# uas >> call cleaned up
# <<
# uas >> received 100/100 packets
# RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(BYE) NO SDP
# I< 127.0.0.1:36117 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
# nathelper >> OK
# <<
# proxy >> OK
# <<
# uas >> OK
# ready
# <<
# proxy >> ready
# <<
# uac >> OK
# <<
# uac >> ready
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(INVITE) SDP: audio=127.0.0.1:5836/2
# <<
# proxy >> I< 127.0.0.1:33224 REQ(INVITE) SDP: audio=127.0.0.1:5836/2
# <<
# proxy >> O> udp:127.0.0.1:34366 REQ(INVITE) SDP: audio=127.0.0.1:10334/2
# <<
# uas >> I< 127.0.0.1:57137 REQ(INVITE) SDP: audio=127.0.0.1:10334/2
# <<
# uas >> O> 127.0.0.1:57137 RSP(INVITE,100) NO SDP
# <<
# uas >> call created
# <<
# uas >> INVITE you.uas@example.com SIP/2.0
# Via: SIP/2.0/UDP 127.0.0.1:57137;branch=z9hG4bK1e19ba55f9d46202c751d6435a93ee8fbf7b09dea2b61e4ebbc4446767b2d861
# Record-route: <sip:127.0.0.1:57137;lr>
# Via: SIP/2.0/UDP 127.0.0.1:36117;branch=z9hG4bK394b61f7b2e55c8caf85d432278cb5d8bf7b09dea2b61e4ebbc4446767b2d861
# Record-route: <sip:127.0.0.1:36117;lr>
# Supported:
# Allow: INVITE, ACK, OPTIONS, CANCEL, BYE
# Via: SIP/2.0/UDP 127.0.0.1:33224;branch=z9hG4bKbb27960282c8c3a54bc5c7092447042fbf7b09dea2b61e4ebbc4446767b2d861
# Call-id: a421c8469378c6525f333430f690f047
# Cseq: 1 INVITE
# From: me.uac@example.com;tag=0db79946910efc6b6e71818716c1da18
# Content-type: application/sdp
# Max-forwards: 69
# Contact: sip:r095d1a470757720006564c53480516030b57520303077f2266287034@127.0.0.1:57137
# Content-length: 176
# To: you.uas@example.com;tag=c4a3aeace80a566ccb7b8e545cd810e5
#
# v=0
# o=anonymous 1378062363 1378062363 IN IP4 127.0.0.1
# s=session
# c=IN IP4 127.0.0.1
# t=0 0
# m=audio 10334 RTP/AVP 0 101
# a=rtpmap:101 telephone-event/8000
# a=fmtp:101 0-16
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,100) NO SDP
# <<
# uac >> I< 127.0.0.1:36117 RSP(INVITE,200) SDP: audio=127.0.0.1:6990/2
# <<
# uac >> O> 127.0.0.1:36117 REQ(ACK) NO SDP
# <<
# uac >> call established
# <<
# uac >> RTP done
# <<
# uas >> O> 127.0.0.1:57137 RSP(INVITE,200) SDP: audio=127.0.0.1:9744/2
# I< 127.0.0.1:57137 REQ(ACK) NO SDP
# call established
# <<
# uas >> I< 127.0.0.1:57137 REQ(BYE) NO SDP
# <<
# uas >> O> 127.0.0.1:57137 RSP(BYE,200) NO SDP
# <<
# uas >> call cleaned up
# <<
# uas >> received 100/100 packets
# RTP ok
# END
# <<
# uac >> O> udp:127.0.0.1:36117 REQ(BYE) NO SDP
# I< 127.0.0.1:36117 RSP(BYE,200) NO SDP
# <<
# uac >> END
# <<
t/05_call_with_stateless_proxy.t ........ ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# <<
# uac >> Send BYE
# <<
# uas >> Got RTP
# Received BYE
# <<
# uac >> BYE done
# <<
t/06_call_with_reinvite.t ............... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Start RTP
# <<
# uac >> RTP#50#
# <<
# uas >> got rtp packet#50
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Start RTP
# <<
# uas >> RTP#50#
# <<
# uac >> got rtp packet#50
# <<
# uac >> Send BYE
# <<
# uas >> Received BYE after 0 bytes read
# <<
# uac >> BYE done
# <<
t/07_call_on_hold.t ..................... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
t/08_register_with_auth.t ............... ok
t/11_invite_timeout.t ................... ok
# call established
# call cleaned up
t/12_maddr.t ............................ ok
t/13_maddr_proxy.t ...................... ok
# UAS on 127.0.0.1:5062
# UAC on 127.0.0.1:5060
# PROXY on 127.0.0.1:5063
# proxy >> OK
# <<
# proxy >> Listening
# <<
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uas >> Starting ReInvite
# <<
# uac >> Got ReInvite
# <<
# uas >> Send BYE
# <<
# uac >> Received BYE
# <<
# uas >> BYE done
# <<
t/14_bugfix_0.51.t ...................... ok
t/15_block_invite.t ..................... ok
t/16_drop_invite.t ...................... ok
# uas >> OK
# <<
# uas >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uas >> Call accepted
# <<
# uac >> Starting ReInvite
# <<
# uas >> ReInvite accepted
# <<
# uac >> ReInvite done
# <<
# uac >> Send BYE
# <<
# uas >> Received BYE
# <<
# uac >> BYE done
# <<
t/17_call_with_reinvite_and_auth.t ...... ok
# registrar >> OK
# <<
# registrar >> Listening
# <<
# uac >> OK
# <<
# uac >> Started
# <<
# uac >> got 401 response
# <<
# uac >> Registered wolf (REALM.example.com)
# <<
# uac >> Registered 007 (REALM.example.com)
# <<
# uac >> Registered noauth ()
# <<
t/18_register_with_auth_step_by_step.t .. ok
# UAS on 127.0.0.1:43611
# UAC on 127.0.0.1:5060
# call created
# call established
# call cleaned up
# received 346/100 packets events=1 2 D # 3 4 B *
t/19_call_with_dtmf.t ................... ok
# call created
# got ringing
# call established
# call cleaned up
t/anyevent.t ............................ ok
t/release-pod-syntax.t .................. skipped: these tests are for release candidate testing
All tests successful.
Files=20, Tests=224, 53 wallclock secs ( 0.12 usr 0.09 sys + 4.92 cusr 2.03 csys = 7.16 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------------------- ------ ------
AnyEvent 0 7.05
AnyEvent::AggressiveIdle 0 0.04
Net::SIP::Dispatcher::Eventloop 0 0
Net::SIP::Util 0 0
strict 0 1.04
warnings 0 1.06
build_requires:
Module Need Have
------------------------------- ------ ------
base 0 2.18
Cwd 0 3.40
Data::Dumper 0 2.145
Digest::MD5 0 2.53
fields 0 2.16
File::Find 0 1.14
File::Temp 0 0.2301
IO::Socket 0 1.31
List::Util 0 1.31
Module::Build 0.3601 0.4007
Net::SIP 0 0.682
Net::SIP::Blocker 0 0
Net::SIP::Debug 0 0
Net::SIP::Dropper 0 0
Net::SIP::Dropper::ByField 0 0
Net::SIP::Dropper::ByIPPort 0 0
Net::SIP::Leg 0 0
Net::SIP::NATHelper::Client 0 0
Net::SIP::NATHelper::Local 0 0
Net::SIP::NATHelper::Server 0 0
Net::SIP::ReceiveChain 0 0
Net::SIP::SDP 0 0
Test::More 0 0.98
configure_requires:
Module Need Have
------------------------------- ------ ------
ExtUtils::MakeMaker 6.30 6.74
Module::Build 0.3601 0.4007
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /usr/lib64/qt-3.3/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/root/bin
PERL5LIB = /root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/arch:/root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/lib:/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/arch:/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 29838
PERL5_CPAN_IS_RUNNING = 29838
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 2073,29838
PERL_CR_SMOKER_CURRENT = AnyEvent-SIP-0.002
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 0 / 0
$GID = 0 0
$EGID = 0 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.00
CPAN::Meta 2.132140
Cwd 3.40
ExtUtils::CBuilder 0.280205
ExtUtils::Command 1.17
ExtUtils::Install 1.54
ExtUtils::MakeMaker 6.74
ExtUtils::Manifest 1.61
ExtUtils::ParseXS 3.18
File::Spec 3.40
JSON 2.59
JSON::PP 2.27202
Module::Build 0.4007
Module::Signature n/a
Parse::CPAN::Meta 1.4405
Test::Harness 3.28
Test::More 0.98
YAML 0.84
YAML::Syck 1.27
version 0.9903
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.32-220.el6.x86_64, archname=x86_64-linux-thread-multi
uname='linux c6b8.bsys.dev.centos.org 2.6.32-220.el6.x86_64 #1 smp tue dec 6 19:48:22 gmt 2011 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -DDEBUGGING=-g -Dversion=5.10.1 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5 -Dprivlib=/usr/share/perl5 -Darchlib=/usr/lib64/perl5 -Dvendorlib=/usr/share/perl5/vendor_perl -Dvendorarch=/usr/lib64/perl5/vendor_perl -Dinc_version_list=5.10.0 -Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin -Dusesitecustomize'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-3)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector'
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.12'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib64/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API USE_SITECUSTOMIZE
Built under linux
Compiled at Apr 30 2013 12:24:05
%ENV:
PERL5LIB="/root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/arch:/root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/lib:/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/arch:/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="29838"
PERL5_CPAN_IS_RUNNING="29838"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="2073,29838"
PERL_CR_SMOKER_CURRENT="AnyEvent-SIP-0.002"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/arch
/root/.cpan/build/AnyEvent-AggressiveIdle-0.04-Al2Q3u/blib/lib
/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/arch
/root/.cpan/build/Net-SIP-0.682-0nEkOd/blib/lib
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.