Back
From: metabase:user:e3434da8-b236-11df-85ca-0247c6d74bde
Subject: FAIL SQL-Preproc-0.10 v5.13.11 GNU/Linux
Date: 2011-09-29T04:36:48Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Dean Arnold,
This is a computer-generated report for SQL-Preproc-0.10
on perl 5.13.11, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/perl513/testing/bin/perl5.13.11 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/01connect.t line 35
t/01connect.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 6/7 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/02createtbl.t line 35
t/02createtbl.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 14/15 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/03loadtbl.t line 37
t/03loadtbl.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 9/10 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/04select.t line 36
t/04select.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 7/8 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/05cursor.t line 36
t/05cursor.t .....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 16/17 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/06excepts.t line 38
t/06excepts.t ....
Dubious, test returned 2 (wstat 512, 0x200)
Failed 12/13 subtests
install_driver(CSV) failed: Can't locate DBD/CSV.pm in @INC (@INC contains: /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/lib /home/perl513/.cpan/build/SQL-Preproc-0.10-c36pC5/blib/arch /home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/site_perl/5.13.11 /home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi /home/perl513/testing/lib/5.13.11 .) at (eval 5) line 3.
Perhaps the DBD::CSV perl module hasn't been fully installed,
or perhaps the capitalisation of 'CSV' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at t/07multiconn.t line 36
t/07multiconn.t ..
Dubious, test returned 2 (wstat 512, 0x200)
Failed 10/11 subtests
t/08subclass.t ... skipped: no DBIx::Chart
t/09updcursor.t .. skipped: no DBD::Teradata
t/10sem.t ........ skipped: no DBD::Teradata
Test Summary Report
-------------------
t/01connect.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 7 tests but ran 2.
t/02createtbl.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 15 tests but ran 2.
t/03loadtbl.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 10 tests but ran 2.
t/04select.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 8 tests but ran 2.
t/05cursor.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 17 tests but ran 2.
t/06excepts.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 13 tests but ran 2.
t/07multiconn.t (Wstat: 512 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 2
Parse errors: Bad plan. You planned 11 tests but ran 2.
Files=10, Tests=14, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.52 cusr 0.07 csys = 0.65 CPU)
Result: FAIL
Failed 7/10 test programs. 7/14 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -----
DBI 0 1.616
Filter::Simple 0 0.86
build_requires:
Module Need Have
------------------- ---- -----
ExtUtils::MakeMaker 0 6.59
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.utf8
LC_COLLATE = C
LC_MONETARY = nl_NL.utf8
PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.15.2/bin:/usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/tester/bin:/home/tester/bin
PATH_WITHOUT_PERLBREW = /usr/lib64/qt-3.3/bin:/usr/lib64/ccache:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/tester/bin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 3097
PERL5_CPAN_IS_RUNNING = 3097
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 11990,3097
PERLBREW_PATH = /home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.15.2/bin
PERLBREW_PERL = perl-5.15.2
PERLBREW_ROOT = /home/tester/perl5/perlbrew
PERLBREW_VERSION = 0.15
PERL_CR_SMOKER_CURRENT = SQL-Preproc-0.10
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/perl513/testing/bin/perl5.13.11
$UID/$EUID = 504 / 504
$GID = 504 501 504
$EGID = 504 501 504
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9600
Cwd 3.36
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.59
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2209
File::Spec 3.33
Module::Build 0.3800
Module::Signature n/a
Test::Harness 3.23
Test::More 0.98
YAML 0.75
YAML::Syck 1.17
version 0.88
--
Summary of my perl5 (revision 5 version 13 subversion 11) configuration:
Platform:
osname=linux, osvers=2.6.35.11-83.fc14.x86_64, archname=x86_64-linux-thread-multi
uname='linux firenze.fritz.box 2.6.35.11-83.fc14.x86_64 #1 smp mon feb 7 07:06:44 utc 2011 x86_64 x86_64 x86_64 gnulinux '
config_args='-Dprefix=/home/perl513/testing -Dusedevel -Dusethreads -des'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.5.1 20100924 (Red Hat 4.5.1-4)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 /usr/local/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.13'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at May 17 2011 14:15:46
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="3097"
PERL5_CPAN_IS_RUNNING="3097"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="11990,3097"
PERLBREW_PATH="/home/tester/perl5/perlbrew/bin:/home/tester/perl5/perlbrew/perls/perl-5.15.2/bin"
PERLBREW_PERL="perl-5.15.2"
PERLBREW_ROOT="/home/tester/perl5/perlbrew"
PERLBREW_VERSION="0.15"
PERL_CR_SMOKER_CURRENT="SQL-Preproc-0.10"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/perl513/testing/lib/site_perl/5.13.11/x86_64-linux-thread-multi
/home/perl513/testing/lib/site_perl/5.13.11
/home/perl513/testing/lib/5.13.11/x86_64-linux-thread-multi
/home/perl513/testing/lib/5.13.11
.