File-ShouldUpdate v0.2.1 Perl 5 v5.34.0 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
File-ShouldUpdate v0.2.1
- Platform
- Perl 5 v5.34.0 x86_64-linux-thread-multi
- Date
- 2022-08-21 06:44:04
- ID
- a5b6979e-211c-11ed-8f4e-c962458f5e5b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Shlomi Fish,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00-compile.t .... ok
t/system-tests.t .. ok
All tests successful.
Files=2, Tests=5, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.16 cusr 0.03 csys = 0.22 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Exporter 5.76 0
File::Spec 3.80 0
IO::Handle 1.46 0
IPC::Open3 1.21 0
Module::Build 0.4231 0.28
Path::Tiny 0.122 0
Test::More 1.302190 0.88
Time::HiRes 1.9767 0
parent 0.238 0
strict 1.12 0
vars 1.05 0
warnings 1.51 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.80
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.80
Module::Build 0.4231
Pod::Parser 0
Pod::Simple 3.42
Test2 1.302190
Test::Harness 3.44
Test::More 1.302190
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/wGPLlDHnrD/lib/perl5:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 18410
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.34.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/wGPLlDHnrD
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/wGPLlDHnrD"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/wGPLlDHnrD
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.34.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 34 subversion 0) configuration:
Platform:
osname=linux
osvers=5.10.38-0-lts
archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.38-0-lts #1-alpine smp fri, 21 may 2021 11:41:13 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.34.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion=''
gccversion='10.2.1 20201203'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under linux
Compiled at May 22 2021 14:46:13
%ENV:
PERL5LIB="/home/cpan/pit/jail/wGPLlDHnrD/lib/perl5:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/lib:/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="18410"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.34.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/wGPLlDHnrD"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/wGPLlDHnrD""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/wGPLlDHnrD"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/wGPLlDHnrD/lib/perl5/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/jail/wGPLlDHnrD/lib/perl5/5.34.0
/home/cpan/pit/jail/wGPLlDHnrD/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/wGPLlDHnrD/lib/perl5
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/lib
/home/cpan/pit/thr/conf/perl-5.34.0/.cpanplus/5.34.0/build/Acm8bZVgIr/File-ShouldUpdate-0.2.1/blib/arch
/home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.34.0/lib/site_perl/5.34.0
/home/cpan/pit/thr/perl-5.34.0/lib/5.34.0/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.34.0/lib/5.34.0