Back
From: metabase:user:320bfe00-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Enbugger-2.016 v5.21.1 GNU/Linux
Date: 2014-06-11T11:43:53Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Joshua ben Jore,
This is a computer-generated report for Enbugger-2.016
on perl 5.21.1, created by CPAN-Reporter-1.2011.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
Running Mkbootstrap for Enbugger ()
chmod 644 Enbugger.bs
PERL_DL_NONLAZY=1 /tmp/basesmoker-reloperl-OT1R/bin/perl "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10load.t .............. ok
t/11load.t .............. ok
Loading DB routines from perl5db.pl version 1.45
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
Received signal An exception.
at t/20error.t line 42.
Enbugger::OnError::(/tmp/loop_over_bdir-8063-somaRh/Enbugger-2.016-iUiLQs/blib/lib/Enbugger/OnError.pm:107):
107: DB::DB();
auto(-2) DB<1> main::is( "$@", "An exception.\n")
auto(-1) DB<2> q
t/20error.t ............. ok
t/21error.t ............. ok
Loading DB routines from perl5db.pl version 1.45
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
Received signal USR1 at t/22signal.t line 50.
eval {...} called at t/22signal.t line 50
Enbugger::OnError::(/tmp/loop_over_bdir-8063-somaRh/Enbugger-2.016-iUiLQs/blib/lib/Enbugger/OnError.pm:107):
107: DB::DB();
auto(-2) DB<1> main::is( "$@", 'USR1')
auto(-1) DB<2> q
t/22signal.t ............ ok
#!perl
# COPYRIGHT AND LICENCE
#
# Copyright (C) 2014 Joshua ben Jore.
#
# This program is distributed WITHOUT ANY WARRANTY, including but not
# limited to the implied warranties of merchantability or fitness for
# a particular purpose.
#
# The program is free software. You may distribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation (either version 2 or any later version)
# and the Perl Artistic License as published by OâReilly Media, Inc.
# Please open the files named gpl-2.0.txt and Artistic for a copy of
# these licenses.
use strict;
use warnings;
use Getopt::Long qw( GetOptions );
use vars qw( $Caught $Value );
use lib qw( ./t );
BEGIN {
require 'reset_perms.pl';
=head1 DESCRIPTION
This test attempts to run the perl5db debugger, break on a line, then
tests that the break occurred where expected. This tests both that
%{"_<30break.pl"} with L magic and @{"_<30break.pl"} with dual-var
strings has been created.
The output of this program can be read by another program and used in
a test.
=head1 OPTIONS
=over
=item --noimport
Enbugger will be loaded without calling C<< ->import >>.
=item --import ELT
Adds an item to the C<< ->import >> argument list.
=item --help
Runs perldoc on this program.
=item --load_perl5db
After loading Enbugger, C<< Enbugger->load_perl5db >> will also be called.
=back
=cut
$ENV{PERLDB_OPTS} = 'noTTY';
# Option parsing.
my $import = 1;
my @import = ();
my $loadPerl5Db = 0;
GetOptions(
help => sub { exec {'perldoc'} 'perldoc', $0 },
noimport => sub { $import = 0 },
'import=s' => \@import,
load_perl5db => \ $loadPerl5Db,
)
or exec {'perldoc'} 'perldoc', $0;
# Promote some options into constants.
require constant;
constant->import( LoadPerl5Db => !! $loadPerl5Db );
# The test is whether the debugger runs and is controlled by my
# test commands here.
{
no warnings 'once';
@DB::typeahead = (
'l 1-200',
'b 146',
'c',
'$main::Caught = $main::Value',
'c',
'q'
);
}
# All our output will go to *OUT. If this program was given a
# parameter, we accept it as file that we should write our output too.
{
my ( $file ) = shift @ARGV;
if ( defined $file ) {
open OUT, '>', $file
or die "Can't open $file for writing: $!";
}
else {
*OUT = *STDOUT;
}
# OUTPUT is HOT.
select *OUT;
$| = 1;
# Things written to STDERR should also go to our single *OUT.
no warnings 'once';
*STDERR = $DB::OUT = $DB::LINEINFO = *OUT;
}
# Look to see if the debugger is on. Before I go and load
# Enbugger, I figure I can at least count on being able to examine
# $^P to see if we were started with the -d debugger flag.
constant->import( UnderTheDebugger => !! $^P );
# Load Enbugger and completely knacker our process. This little
# snippet used to just be a static `use Enbugger;' but I moved it
# up here when it became obvious that I wanted to optionally avoid
# importing anything.
require Enbugger;
if ( $import ) {
Enbugger->import( @import );
}
}
# Commands executed here:
# > l 1-200
# > b 146
# > c
Enbugger->stop;
$Value = 0;
$Value = 1;
$Value = 2;
$Value = 3;
# Commands executed here when the breakpoint works.
# > $main::Caught = $main::Value
# > c
$Value = 4;
$Value = 5;
$Value = 6;
$Value = 7;
$Value = 8;
$Value = 9;
$Value = 0;
$Caught = 'undef' if ! defined $Caught;
print "\$Caught = $main::Caught.\n";
# Commands executed here:
# > q
main::(t/30break.pl:138): $Value = 0;
Failed to run /tmp/basesmoker-reloperl-OT1R/bin/perl -Mblib t/30break.pl /tmp/3G3kVq7eWd: core dumped signal: 6 at t/Test/Enbugger.pm line 104.
# Looks like your test exited with 255 before it could output anything.
t/30break.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 24/24 subtests
# report_file: t/nytprof.out
# report_dir: t/nytprof
# nytprofcsv: /home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e/bin/nytprofcsv
t/nytprof.t ............. ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
t/trepantest.t .......... ok
Test Summary Report
-------------------
t/30break.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 24 tests but ran 0.
Files=9, Tests=32, 31 wallclock secs ( 0.05 usr 0.00 sys + 30.16 cusr 0.34 csys = 30.55 CPU)
Result: FAIL
Failed 1/9 test programs. 0/32 subtests failed.
Makefile:1107: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
B::Utils 0.25 0.25
Test::More 0 1.001003
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 6.98
configure_requires:
Module Need Have
------------------- ---- --------
B::Utils 0.22 0.25
ExtUtils::CBuilder 0 0.280216
Test::More 0 1.001003
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LANGUAGE = en_US:en
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 15501
PERL5_CPAN_IS_RUNNING = 15501
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-OT1R/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.05
CPAN::Meta 2.141520
Cwd 3.48
ExtUtils::CBuilder 0.280216
ExtUtils::Command 1.18
ExtUtils::Install 1.68
ExtUtils::MakeMaker 6.98
ExtUtils::Manifest 1.63
ExtUtils::ParseXS 3.24
File::Spec 3.48
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4205
Module::Signature 0.73
Parse::CPAN::Meta 1.4414
Test::Harness 3.31
Test::More 1.001003
YAML 0.92
YAML::Syck 1.27
version 0.9908
--
Summary of my perl5 (revision 5 version 21 subversion 1) configuration:
Commit id: 097675bf0fb77cbfa1453e5928bafec9b7f0c482
Platform:
osname=linux, osvers=3.14-1-amd64, archname=x86_64-linux-ld
uname='linux k83 3.14-1-amd64 #1 smp debian 3.14.5-1 (2014-06-05) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e -Dmyhostname=k83 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Uuseithreads -Duselongdouble -DDEBUGGING=-g'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.8.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/4.8/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.19.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.19'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_LONG_DOUBLE
USE_PERLIO USE_PERL_ATOF
Built under linux
Compiled at Jun 10 2014 09:23:09
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="15501"
PERL5_CPAN_IS_RUNNING="15501"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e/lib/site_perl/5.21.1/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e/lib/site_perl/5.21.1
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e/lib/5.21.1/x86_64-linux-ld
/home/sand/src/perl/repoperls/installed-perls/perl/v5.21.0-327-g097675b/127e/lib/5.21.1
.