Inline-C v0.82_001 Perl 5 v5.32.0 amd64-freebsd-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.82_001
- Platform
- Perl 5 v5.32.0 amd64-freebsd-thread-multi
- Date
- 2022-03-14 09:18:27
- ID
- b4b9326a-a377-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ETJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/usr/home/cpan/pit/thr/perl-5.32.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have Where Howbig
# ----------------------- ---- ---- ------------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 109336
# File::ShareDir::Install 0.06 0.13 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 11192
#
# === Build Requires ===
#
# Module Want Have Where Howbig
# ------------------- ---- ---- ------------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 109336
#
# === Test Requires ===
#
# Module Want Have Where Howbig
# --------------------- ---- -------- ---------------------------------------------------------------------------------- ------
# File::Copy::Recursive any 0.45 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 27561
# File::Path any 2.18 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 43254
# File::Temp 0.19 0.2311 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 118877
# Test::More 0.88 1.302188 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 52981
# Test::Warn 0.23 0.36 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 15895
# YAML::XS any 0.83 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5/amd64-freebsd-thread-multi 3593
# autodie any 2.32 /usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0 12526
# version 0.77 0.9929 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0/amd64-freebsd-thread-multi 3549
#
# === Runtime Requires ===
#
# Module Want Have Where Howbig
# ------------------- -------- -------- ------------------------------------------------------------------------ ------
# ExtUtils::MakeMaker 7.00 7.62 /usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0 109336
# File::Spec 0.8 3.78 /usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0/amd64-freebsd-thread-multi 10571
# Inline 0.86 0.86 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 62663
# Parse::RecDescent 1.967009 1.967015 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 222044
# Pegex 0.66 0.75 /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5 750
#
t/00-report-prereqs.t .............. ok
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
Use of uninitialized value in numeric eq (==) at
/usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0/amd64-freebsd-thread-multi/IO/Select.pm line 71 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you
the name of the variable (if any) that was undefined. In some cases
it cannot do this, so it also tells you what operation you used the
undefined value in. Note, however, that perl optimizes your program
and the operation displayed in the warning may not necessarily appear
literally in your program. For example, "that $foo" is usually
optimized into "that " . $foo, and the warning will refer to the
concatenation (.) operator, even though there is no . in
your program.
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=37, Tests=162, 138 wallclock secs ( 0.22 usr 0.09 sys + 108.16 cusr 28.22 csys = 136.69 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.62 7.00
File::Copy::Recursive 0.45 0
File::Path 2.18 0
File::Spec 3.78 0.8
File::Temp 0.2311 0.19
Inline 0.86 0.86
Parse::RecDescent 1.967015 1.967009
Pegex 0.75 0.66
Test::More 1.302188 0.88
Test::Warn 0.36 0.23
YAML::XS 0.83 0
autodie 2.32 0
version 0.9929 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.78
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.40
File::Spec 3.78
Module::Build 0.4231
Pod::Parser 0
Pod::Simple 3.40
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
PERL5LIB = /usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 28762
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /usr/home/cpan/pit/thr/conf/perl-5.32.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /usr/home/cpan/pit/jail/X_lToNYDE5
PERL_MB_OPT = --install_base "/usr/home/cpan/pit/jail/X_lToNYDE5"
PERL_MM_OPT = INSTALL_BASE=/usr/home/cpan/pit/jail/X_lToNYDE5
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /usr/home/cpan/pit/thr/perl-5.32.0/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 32 subversion 0) configuration:
Platform:
osname=freebsd
osvers=12.3-release
archname=amd64-freebsd-thread-multi
uname='freebsd fforc 12.3-release freebsd 12.3-release r371126 generic amd64 '
config_args='-des -Dprefix=/usr/home/cpan/pit/thr/perl-5.32.0 -Dusethreads'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
optimize='-O2'
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='FreeBSD Clang 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags ='-pthread -Wl,-E -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib /usr/lib/clang/10.0.1/lib /usr/lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil
perllibs=-lpthread -ldl -lm -lcrypt -lutil
libc=
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags=' '
cccdlflags='-DPIC -fPIC'
lddlflags='-shared -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Locally applied patches:
Devel::PatchPerl 2.08
Built under freebsd
Compiled at Dec 9 2021 18:49:38
%ENV:
PERL5LIB="/usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/lib:/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="28762"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/usr/home/cpan/pit/thr/conf/perl-5.32.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/usr/home/cpan/pit/jail/X_lToNYDE5"
PERL_MB_OPT="--install_base "/usr/home/cpan/pit/jail/X_lToNYDE5""
PERL_MM_OPT="INSTALL_BASE=/usr/home/cpan/pit/jail/X_lToNYDE5"
PERL_MM_USE_DEFAULT="1"
@INC:
/usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5/5.32.0
/usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5/amd64-freebsd-thread-multi
/usr/home/cpan/pit/jail/X_lToNYDE5/lib/perl5
/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/lib
/usr/home/cpan/pit/thr/conf/perl-5.32.0/.cpanplus/5.32.0/build/CTXHdKpRxy/Inline-C-0.82_001/blib/arch
/usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.32.0/lib/site_perl/5.32.0
/usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0/amd64-freebsd-thread-multi
/usr/home/cpan/pit/thr/perl-5.32.0/lib/5.32.0