Imager v1.024_008 Perl 5 v5.38.0 x86_64-linux-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Imager v1.024_008
- Platform
- Perl 5 v5.38.0 x86_64-linux-ld
- Date
- 2024-06-14 03:39:38
- ID
- ba3dfb9c-29ff-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear TONYC,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Imager.bs blib/arch/auto/Imager/Imager.bs 644
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/CountColor'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CountColor.bs ../blib/arch/auto/Imager/CountColor/CountColor.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/CountColor'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/DynTest'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- DynTest.bs ../blib/arch/auto/Imager/Filter/DynTest/DynTest.bs 644
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/DynTest'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/FT2'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FT2.bs ../blib/arch/auto/Imager/Font/FT2/FT2.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/FT2'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Flines'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Flines.bs ../blib/arch/auto/Imager/Filter/Flines/Flines.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Flines'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/GIF'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/GIF'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/ICO'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ICO.bs ../blib/arch/auto/Imager/File/ICO/ICO.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/ICO'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/JPEG'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- JPEG.bs ../blib/arch/auto/Imager/File/JPEG/JPEG.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/JPEG'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Mandelbrot'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mandelbrot.bs ../blib/arch/auto/Imager/Filter/Mandelbrot/Mandelbrot.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Mandelbrot'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/PNG'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- PNG.bs ../blib/arch/auto/Imager/File/PNG/PNG.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/PNG'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/SGI'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SGI.bs ../blib/arch/auto/Imager/File/SGI/SGI.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/SGI'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/TIFF'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- TIFF.bs ../blib/arch/auto/Imager/File/TIFF/TIFF.bs 644
Manifying 1 pod document
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/TIFF'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/W32'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/W32'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/CountColor'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CountColor.bs ../blib/arch/auto/Imager/CountColor/CountColor.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t00countcolor.t .. ok
All tests successful.
Files=1, Tests=9, 0 wallclock secs ( 0.01 usr 0.01 sys + 0.08 cusr 0.00 csys = 0.10 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/CountColor'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/DynTest'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- DynTest.bs ../blib/arch/auto/Imager/Filter/DynTest/DynTest.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t00dyntest.t .. ok
All tests successful.
Files=1, Tests=4, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.02 csys = 0.11 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/DynTest'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/FT2'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FT2.bs ../blib/arch/auto/Imager/Font/FT2/FT2.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
FreeType2 runtime 2.11.1 compile-time 2.11.1
t/t10ft2.t ..... ok
t/t20thread.t .. skipped: can't test Imager's lack of threads support with no threads
t/t90std.t ..... ok
All tests successful.
Files=3, Tests=226, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.41 cusr 0.16 csys = 0.61 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/FT2'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Flines'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Flines.bs ../blib/arch/auto/Imager/Filter/Flines/Flines.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t00flines.t .. ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr 0.01 csys = 0.11 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Flines'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/GIF'
make[1]: Nothing to be done for 'test_dynamic'.
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/GIF'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/ICO'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- ICO.bs ../blib/arch/auto/Imager/File/ICO/ICO.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t10icon.t ......... ok
t/t20readone.t ...... ok
t/t21readmult.t ..... ok
t/t30cursor.t ....... ok
t/t40readcurone.t ... ok
t/t41curmultread.t .. ok
t/t50readfail.t ..... ok
t/t60writefail.t .... ok
t/t70icosing.t ...... ok
t/t71icomult.t ...... ok
t/t72cursing.t ...... ok
t/t73curmult.t ...... ok
All tests successful.
Files=12, Tests=253, 2 wallclock secs ( 0.04 usr 0.02 sys + 0.97 cusr 0.13 csys = 1.16 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/ICO'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/JPEG'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- JPEG.bs ../blib/arch/auto/Imager/File/JPEG/JPEG.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t00load.t ... ok
# libjpeg version: libjpeg-turbo version 2.1.2 api 80
t/t10jpeg.t ... ok
t/t20limit.t .. ok
All tests successful.
Files=3, Tests=188, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.55 cusr 0.10 csys = 0.69 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/JPEG'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Mandelbrot'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Mandelbrot.bs ../blib/arch/auto/Imager/Filter/Mandelbrot/Mandelbrot.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/t00mandel.t .. ok
All tests successful.
Files=1, Tests=3, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr 0.02 csys = 0.11 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/Mandelbrot'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/PNG'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- PNG.bs ../blib/arch/auto/Imager/File/PNG/PNG.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/00load.t .. ok
# Library version 10637
t/10png.t ... ok
All tests successful.
Files=2, Tests=260, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.44 cusr 0.04 csys = 0.52 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/PNG'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/SGI'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SGI.bs ../blib/arch/auto/Imager/File/SGI/SGI.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
t/00load.t ... ok
t/10read.t ... ok
t/20write.t .. ok
t/30limit.t .. ok
All tests successful.
Files=4, Tests=175, 1 wallclock secs ( 0.04 usr 0.01 sys + 0.39 cusr 0.09 csys = 0.53 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/SGI'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/TIFF'
"/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- TIFF.bs ../blib/arch/auto/Imager/File/TIFF/TIFF.bs 644
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, '../blib/lib', '../blib/arch')" t/*.t
# libtiff binary release 4.3.0
# build version date 20210416
t/10tiff.t .. ok
All tests successful.
Files=1, Tests=258, 0 wallclock secs ( 0.05 usr 0.00 sys + 0.39 cusr 0.09 csys = 0.53 CPU)
Result: PASS
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/TIFF'
make[1]: Entering directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/W32'
make[1]: Nothing to be done for 'test_dynamic'.
make[1]: Leaving directory '/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/W32'
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.38.0/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/*/*.t
t/000-load.t ......................... ok
t/100-base/010-introvert.t ........... ok
t/100-base/020-color.t ............... ok
t/100-base/030-countc.t .............. ok
t/100-base/040-extra8.t .............. ok
t/100-base/050-data8.t ............... ok
t/100-base/100-linear.t .............. ok
t/100-base/800-tr18561.t ............. ok
t/100-base/801-tr18561b.t ............ ok
t/150-type/020-sixteen.t ............. ok
t/150-type/030-double.t .............. ok
t/150-type/040-palette.t ............. ok
t/150-type/050-float.t ............... ok
t/150-type/060-lin16.t ............... ok
t/150-type/070-lindbl.t .............. ok
t/150-type/100-masked.t .............. ok
t/150-type/300-extra16.t ............. ok
t/150-type/310-extradbl.t ............ ok
t/150-type/320-extramask.t ........... ok
t/200-file/010-iolayer.t ............. ok
t/200-file/100-files.t ............... ok
t/200-file/200-nojpeg.t .............. skipped: have jpeg support - this tests the lack of it
t/200-file/210-nopng.t ............... skipped: png available, and this tests the lack of it
t/200-file/220-nogif.t ............... ok
t/200-file/230-notiff.t .............. skipped: tiff support available - this tests the lack of it
t/200-file/300-raw.t ................. ok
t/200-file/310-pnm.t ................. ok
t/200-file/320-bmp.t ................. ok
t/200-file/330-tga.t ................. ok
t/200-file/400-basic.t ............... ok
t/200-file/450-preload.t ............. ok
t/250-draw/010-draw.t ................ ok
t/250-draw/020-flood.t ............... ok
t/250-draw/030-paste.t ............... ok
t/250-draw/040-rubthru.t ............. ok
t/250-draw/050-polyaa.t .............. ok
t/250-draw/060-polypoly.t ............ ok
t/250-draw/100-fill.t ................ ok
t/250-draw/200-compose.t ............. ok
t/300-transform/010-scale.t .......... ok
t/300-transform/020-combine.t ........ ok
t/300-transform/030-copyflip.t ....... ok
t/300-transform/040-crop.t ........... ok
t/300-transform/050-convert.t ........ ok
t/300-transform/060-map.t ............ ok
t/300-transform/200-trimcolorlist.t .. ok
t/300-transform/210-trim.t ........... ok
t/300-transform/500-trans.t .......... skipped: No Affix::Infix2Postfix
t/300-transform/600-trans2.t ......... ok
t/300-transform/610-postfix.t ........ ok
t/300-transform/620-infix.t .......... ok
t/300-transform/630-assem.t .......... ok
t/350-font/010-font.t ................ ok
t/350-font/020-tt.t .................. ok
t/350-font/030-ttoo.t ................ ok
t/350-font/040-ttstd.t ............... skipped: No tt available
t/350-font/100-texttools.t ........... ok
t/400-filter/010-filters.t ........... ok
t/400-filter/020-autolevels.t ........ ok
t/450-api/100-inline.t ............... skipped: Inline required for testing API
t/450-api/110-inlinectx.t ............ skipped: Inline required for testing API
t/450-api/130-cpp.t .................. skipped: Inline::CPP required for testing C++ compatibility
t/850-thread/010-base.t .............. skipped: can't test Imager's threads support with no threads
t/850-thread/100-error.t ............. skipped: can't test Imager's threads support with no threads
t/850-thread/110-log.t ............... skipped: can't test Imager's threads support with no threads
t/900-util/010-test.t ................ ok
t/900-util/020-error.t ............... ok
t/900-util/030-log.t ................. ok
t/900-util/040-limit.t ............... skipped: can't test Imager's threads support with no threads
t/900-util/050-matrix.t .............. ok
t/900-util/060-extutil.t ............. ok
t/900-util/060-hlines.t .............. ok
t/950-kwalitee/010-pod.t ............. skipped: Test::Pod 1.00 required for testing POD
t/950-kwalitee/020-samples.t ......... ok
t/950-kwalitee/030-podcover.t ........ skipped: Test::Pod::Coverage 1.08 required for POD coverage
t/950-kwalitee/040-strict.t .......... ok
t/950-kwalitee/050-meta.t ............ ok
t/950-kwalitee/060-podstruct.t ....... skipped: Pod::Parser 1.50 required for podlinkcheck
t/950-kwalitee/070-mymeta.t .......... ok
t/950-kwalitee/080-nousevars.t ....... ok
All tests successful.
Files=80, Tests=8703, 12 wallclock secs ( 0.90 usr 0.10 sys + 9.20 cusr 1.66 csys = 11.86 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Exporter 5.77 5.57
ExtUtils::MakeMaker 7.70 0
Scalar::Util 1.63 1.00
Test::More 1.302199 0.99
XSLoader 0.32 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.89
ExtUtils::CBuilder 0.280238
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.88
Module::Build 0.4234
Pod::Parser 0
Pod::Simple 3.43
Test2 1.302199
Test::Harness 3.48
Test::More 1.302199
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/jail/dEdgIDiBn8/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/dEdgIDiBn8/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 317753
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.38.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/dEdgIDiBn8
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/dEdgIDiBn8"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/dEdgIDiBn8
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.38.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 38 subversion 0) configuration:
Platform:
osname=linux
osvers=5.15.0-76-generic
archname=x86_64-linux-ld
uname='linux uchder 5.15.0-76-generic #83-ubuntu smp thu jun 15 19:16:32 utc 2023 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.38.0 -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='11.3.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /usr/lib64
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/lib/x86_64-linux-gnu/libc.so.6
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.35'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_LONG_DOUBLE
HAS_STRTOLD
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_SIPHASH13
PERL_HASH_USE_SBOX32
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_SAFE_PUTENV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Jul 3 2023 23:56:47
%ENV:
PERL5LIB="/home/cpan/pit/jail/dEdgIDiBn8/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="317753"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.38.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/dEdgIDiBn8"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/dEdgIDiBn8""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/dEdgIDiBn8"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/dEdgIDiBn8/lib/perl5/5.38.0/x86_64-linux-ld
/home/cpan/pit/jail/dEdgIDiBn8/lib/perl5/5.38.0
/home/cpan/pit/jail/dEdgIDiBn8/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/dEdgIDiBn8/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.38.0/.cpanplus/5.38.0/build/glVfM_fwWQ/Imager-1.024_008/blib/arch
/home/cpan/pit/bare-ld/perl-5.38.0/lib/site_perl/5.38.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.38.0/lib/site_perl/5.38.0
/home/cpan/pit/bare-ld/perl-5.38.0/lib/5.38.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.38.0/lib/5.38.0