Enbugger v2.016 Perl 5 v5.35.11 x86_64-linux-multi
- Status
- Fail
- From
- Andreas J. König (ANDK)
- Dist
-
Enbugger v2.016
- Platform
- Perl 5 v5.35.11 x86_64-linux-multi
- Date
- 2022-05-02 14:47:09
- ID
- beaa585a-ca26-11ec-bae3-e8fed8865e30
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear jjore,
This is a computer-generated report for Enbugger-2.016
on perl 5.35.11, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
"/tmp/basesmoker-reloperl-FIQg/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Enbugger.bs blib/arch/auto/Enbugger/Enbugger.bs 644
PERL_DL_NONLAZY=1 "/tmp/basesmoker-reloperl-FIQg/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/10load.t .............. ok
t/11load.t .............. ok
Loading DB routines from perl5db.pl version 1.72
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
Received signal An exception.
at t/20error.t line 42.
Enbugger::OnError::(/home/sand/.cpan/privbuild/k93msid/Enbugger-2.016-0/blib/lib/Enbugger/OnError.pm:107):
107: DB::DB();
auto(-2) DB<1> main::is( "$@", "An exception.\n")
auto(-1) DB<2> q
t/20error.t ............. ok
t/21error.t ............. ok
Loading DB routines from perl5db.pl version 1.72
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
Received signal USR1 at t/22signal.t line 50.
eval {...} called at t/22signal.t line 50
Enbugger::OnError::(/home/sand/.cpan/privbuild/k93msid/Enbugger-2.016-0/blib/lib/Enbugger/OnError.pm:107):
107: DB::DB();
auto(-2) DB<1> main::is( "$@", 'USR1')
auto(-1) DB<2> q
t/22signal.t ............
All 1 subtests passed
perl: av.c:257: Perl_av_fetch: Assertion `av' failed.
#!perl
# COPYRIGHT AND LICENCE
#
# Copyright (C) 2014 Joshua ben Jore.
#
# This program is distributed WITHOUT ANY WARRANTY, including but not
# limited to the implied warranties of merchantability or fitness for
# a particular purpose.
#
# The program is free software. You may distribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation (either version 2 or any later version)
# and the Perl Artistic License as published by OâÂÂReilly Media, Inc.
# Please open the files named gpl-2.0.txt and Artistic for a copy of
# these licenses.
use strict;
use warnings;
use Getopt::Long qw( GetOptions );
use vars qw( $Caught $Value );
use lib qw( ./t );
BEGIN {
require 'reset_perms.pl';
=head1 DESCRIPTION
This test attempts to run the perl5db debugger, break on a line, then
tests that the break occurred where expected. This tests both that
%{"_<30break.pl"} with L magic and @{"_<30break.pl"} with dual-var
strings has been created.
The output of this program can be read by another program and used in
a test.
=head1 OPTIONS
=over
=item --noimport
Enbugger will be loaded without calling C<< ->import >>.
=item --import ELT
Adds an item to the C<< ->import >> argument list.
=item --help
Runs perldoc on this program.
=item --load_perl5db
After loading Enbugger, C<< Enbugger->load_perl5db >> will also be called.
=back
=cut
$ENV{PERLDB_OPTS} = 'noTTY';
# Option parsing.
my $import = 1;
my @import = ();
my $loadPerl5Db = 0;
GetOptions(
help => sub { exec {'perldoc'} 'perldoc', $0 },
noimport => sub { $import = 0 },
'import=s' => \@import,
load_perl5db => \ $loadPerl5Db,
)
or exec {'perldoc'} 'perldoc', $0;
# Promote some options into constants.
require constant;
constant->import( LoadPerl5Db => !! $loadPerl5Db );
# The test is whether the debugger runs and is controlled by my
# test commands here.
{
no warnings 'once';
@DB::typeahead = (
'l 1-200',
'b 146',
'c',
'$main::Caught = $main::Value',
'c',
'q'
);
}
# All our output will go to *OUT. If this program was given a
# parameter, we accept it as file that we should write our output too.
{
my ( $file ) = shift @ARGV;
if ( defined $file ) {
open OUT, '>', $file
or die "Can't open $file for writing: $!";
}
else {
*OUT = *STDOUT;
}
# OUTPUT is HOT.
select *OUT;
$| = 1;
# Things written to STDERR should also go to our single *OUT.
no warnings 'once';
*STDERR = $DB::OUT = $DB::LINEINFO = *OUT;
}
# Look to see if the debugger is on. Before I go and load
# Enbugger, I figure I can at least count on being able to examine
# $^P to see if we were started with the -d debugger flag.
constant->import( UnderTheDebugger => !! $^P );
# Load Enbugger and completely knacker our process. This little
# snippet used to just be a static `use Enbugger;' but I moved it
# up here when it became obvious that I wanted to optionally avoid
# importing anything.
require Enbugger;
if ( $import ) {
Enbugger->import( @import );
}
}
# Commands executed here:
# > l 1-200
# > b 146
# > c
Enbugger->stop;
$Value = 0;
$Value = 1;
$Value = 2;
$Value = 3;
# Commands executed here when the breakpoint works.
# > $main::Caught = $main::Value
# > c
$Value = 4;
$Value = 5;
$Value = 6;
$Value = 7;
$Value = 8;
$Value = 9;
$Value = 0;
$Caught = 'undef' if ! defined $Caught;
print "\$Caught = $main::Caught.\n";
# Commands executed here:
# > q
main::(t/30break.pl:138): $Value = 0;
Failed to run /tmp/basesmoker-reloperl-FIQg/bin/perl -Mblib t/30break.pl /tmp/pFFhlMsQU1: core dumped signal: 6 at t/Test/Enbugger.pm line 104.
# Looks like your test exited with 255 before it could output anything.
t/30break.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 24/24 subtests
# report_file: t/nytprof.out
# report_dir: t/nytprof
# nytprofcsv: /home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5/bin/nytprofcsv
t/nytprof.t ............. ok
t/release-pod-syntax.t .. skipped: these tests are for release candidate testing
t/trepantest.t .......... skipped: Skipped because Devel::Trepan isn't installed
Test Summary Report
-------------------
t/22signal.t (Wstat: 139 (Signal: SEGV, dumped core) Tests: 1 Failed: 0)
Non-zero wait status: 139
t/30break.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 24 tests but ran 0.
Files=9, Tests=31, 14 wallclock secs ( 0.05 usr 0.02 sys + 12.11 cusr 0.74 csys = 12.92 CPU)
Result: FAIL
Failed 2/9 test programs. 0/31 subtests failed.
make: *** [Makefile:1117: test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
B::Utils 0.25 0.27
Test::More 0 1.302190
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.64
configure_requires:
Module Need Have
------------------- ---- --------
B::Utils 0.22 0.27
ExtUtils::CBuilder 0 0.280236
Test::More 0 1.302190
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 3874085
PERL5_CPAN_IS_RUNNING = 3874085
PERL_CANARY_STABILITY_NOPROMPT = 1
PERL_MM_USE_DEFAULT = 1
PERL_USE_UNSAFE_INC = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /tmp/basesmoker-reloperl-FIQg/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.34
CPAN::Meta 2.150010
Cwd 3.84
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.45
File::Spec 3.84
JSON 4.05
JSON::PP 4.08
Module::Build 0.4231
Module::Signature 0.88
Parse::CPAN::Meta 2.150010
Test::Harness 3.44
Test::More 1.302190
YAML 1.30
YAML::Syck 1.34
version 0.9929
--
Summary of my perl5 (revision 5 version 35 subversion 11) configuration:
Commit id: 6309b8c0e379d2ae5a9d50fe46b4c1f52ec1b012
Platform:
osname=linux
osvers=5.17.0-1-amd64
archname=x86_64-linux-multi
uname='linux k93msid 5.17.0-1-amd64 #1 smp preempt debian 5.17.3-1 (2022-04-18) x86_64 gnulinux '
config_args='-Dprefix=/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5 -Dmyhostname=k93msid -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dlibswanted=cl pthread socket inet nsl gdbm dbm malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat -Uuseithreads -Uuselongdouble -DEBUGGING=both -Dusemultiplicity'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='cc'
ccflags ='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
optimize='-O2 -g'
cppflags='-fwrapv -DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='11.3.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.33.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.33'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
DEBUGGING
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_TRACK_MEMPOOL
PERL_USE_DEVEL
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
Built under linux
Compiled at Apr 30 2022 18:43:30
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="3874085"
PERL5_CPAN_IS_RUNNING="3874085"
PERL_CANARY_STABILITY_NOPROMPT="1"
PERL_MM_USE_DEFAULT="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5/lib/site_perl/5.35.11/x86_64-linux-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5/lib/site_perl/5.35.11
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5/lib/5.35.11/x86_64-linux-multi
/home/sand/src/perl/repoperls/installed-perls/host/k93msid/v5.35.11/4da5/lib/5.35.11
.