Inline-C v0.82_001 Perl 5 v5.24.2 x86_64-linux-thread-multi
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Inline-C v0.82_001
- Platform
- Perl 5 v5.24.2 x86_64-linux-thread-multi
- Date
- 2022-03-14 06:27:01
- ID
- c1e883b8-a35f-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear ETJ,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/home/cpan/pit/thr/perl-5.24.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
#
# Versions for all modules listed in MYMETA.json (including optional ones):
#
# === Configure Requires ===
#
# Module Want Have Where Howbig
# ----------------------- ---- ---- --------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 109336
# File::ShareDir::Install 0.06 0.13 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 11192
#
# === Build Requires ===
#
# Module Want Have Where Howbig
# ------------------- ---- ---- --------------------------------------------------- ------
# ExtUtils::MakeMaker any 7.62 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 109336
#
# === Test Requires ===
#
# Module Want Have Where Howbig
# --------------------- ---- -------- ----------------------------------------------------------------------------- ------
# File::Copy::Recursive any 0.45 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 27561
# File::Path any 2.18 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 43254
# File::Temp 0.19 0.2311 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 118877
# Test::More 0.88 1.302188 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 52981
# Test::Warn 0.23 0.36 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 15895
# YAML::XS any 0.83 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5/x86_64-linux-thread-multi 3593
# autodie any 2.29 /home/cpan/pit/thr/perl-5.24.2/lib/5.24.2 12886
# version 0.77 0.9929 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2/x86_64-linux-thread-multi 3549
#
# === Runtime Requires ===
#
# Module Want Have Where Howbig
# ------------------- -------- -------- ----------------------------------------------------------------------------- ------
# ExtUtils::MakeMaker 7.00 7.62 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2 109336
# File::Spec 0.8 3.75 /home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2/x86_64-linux-thread-multi 10571
# Inline 0.86 0.86 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 62663
# Parse::RecDescent 1.967009 1.967015 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 222044
# Pegex 0.66 0.75 /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5 750
#
t/00-report-prereqs.t .............. ok
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=37, Tests=162, 48 wallclock secs ( 0.11 usr 0.03 sys + 38.33 cusr 9.91 csys = 48.38 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.62 7.00
File::Copy::Recursive 0.45 0
File::Path 2.18 0
File::Spec 3.75 0.8
File::Temp 0.2311 0.19
Inline 0.86 0.86
Parse::RecDescent 1.967015 1.967009
Pegex 0.75 0.66
Test::More 1.302188 0.88
Test::Warn 0.36 0.23
YAML::XS 0.83 0
autodie 2.29 0
version 0.9929 0.77
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.63
Pod::Simple 3.32
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C.UTF-8
LC_COLLATE = C
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PERL5LIB = /home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5:/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 30795
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.24.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/0sjI9Z2HLz
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/0sjI9Z2HLz"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/0sjI9Z2HLz
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.24.2/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 24 subversion 2) configuration:
Platform:
osname=linux, osvers=5.10.16-0-lts, archname=x86_64-linux-thread-multi
uname='linux agaric 5.10.16-0-lts #1-alpine smp wed, 17 feb 2021 08:17:06 utc x86_64 linux '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.24.2 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong'
ccversion='', gccversion='10.2.1 20201203', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/include/fortify /usr/lib /usr/local/lib /lib/../lib /usr/lib/../lib /lib
libs=-lpthread -lgdbm -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -ldl -lm -lcrypt -lutil -lc
libc=/usr/lib/libc.a, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 12 2021 23:19:14
%ENV:
PERL5LIB="/home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5:/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/lib:/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="30795"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.24.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/0sjI9Z2HLz"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/0sjI9Z2HLz""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/0sjI9Z2HLz"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5/5.24.2/x86_64-linux-thread-multi
/home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5/5.24.2
/home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5/x86_64-linux-thread-multi
/home/cpan/pit/jail/0sjI9Z2HLz/lib/perl5
/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/lib
/home/cpan/pit/thr/conf/perl-5.24.2/.cpanplus/5.24.2/build/D1vDvz_VLm/Inline-C-0.82_001/blib/arch
/home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.24.2/lib/site_perl/5.24.2
/home/cpan/pit/thr/perl-5.24.2/lib/5.24.2/x86_64-linux-thread-multi
/home/cpan/pit/thr/perl-5.24.2/lib/5.24.2
.