List-MoreUtils v0.430 Perl 5 v5.12.5 i686-linux-64int-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
List-MoreUtils v0.430
- Platform
- Perl 5 v5.12.5 i686-linux-64int-ld
- Date
- 2022-09-11 05:15:39
- ID
- c6b94d9a-3190-11ed-8f4e-c962458f5e5b
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Jens Rehsack,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/64bit-ld/perl-5.12.5/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/pureperl/*.t t/xs/*.t xt/*.t
t/pureperl/after.t ................ ok
t/pureperl/after_incl.t ........... ok
t/pureperl/all.t .................. ok
t/pureperl/all_u.t ................ ok
t/pureperl/any.t .................. ok
t/pureperl/any_u.t ................ ok
t/pureperl/apply.t ................ ok
t/pureperl/arrayify.t ............. ok
t/pureperl/before.t ............... ok
t/pureperl/before_incl.t .......... ok
t/pureperl/binsert.t .............. ok
t/pureperl/bremove.t .............. ok
t/pureperl/bsearch.t .............. ok
t/pureperl/bsearchidx.t ........... ok
t/pureperl/duplicates.t ........... ok
t/pureperl/each_array.t ........... ok
t/pureperl/equal_range.t .......... ok
t/pureperl/false.t ................ ok
t/pureperl/firstidx.t ............. ok
t/pureperl/firstres.t ............. ok
t/pureperl/firstval.t ............. ok
t/pureperl/frequency.t ............ ok
t/pureperl/Import.t ............... ok
t/pureperl/indexes.t .............. ok
t/pureperl/insert_after.t ......... ok
t/pureperl/insert_after_string.t .. ok
t/pureperl/lastidx.t .............. ok
t/pureperl/lastres.t .............. ok
t/pureperl/lastval.t .............. ok
t/pureperl/listcmp.t .............. ok
t/pureperl/lower_bound.t .......... ok
t/pureperl/mesh.t ................. ok
t/pureperl/minmax.t ............... ok
t/pureperl/minmaxstr.t ............ ok
t/pureperl/mode.t ................. ok
t/pureperl/natatime.t ............. ok
t/pureperl/none.t ................. ok
t/pureperl/none_u.t ............... ok
t/pureperl/notall.t ............... ok
t/pureperl/notall_u.t ............. ok
t/pureperl/occurrences.t .......... ok
t/pureperl/one.t .................. ok
t/pureperl/one_u.t ................ ok
t/pureperl/onlyidx.t .............. ok
t/pureperl/onlyres.t .............. ok
t/pureperl/onlyval.t .............. ok
t/pureperl/pairwise.t ............. ok
t/pureperl/part.t ................. ok
t/pureperl/qsort.t ................ skipped: It's insane to use a pure-perl qsort
t/pureperl/reduce_0.t ............. ok
Name "main::a" used only once: possible typo at t/pureperl/reduce_1.t line 36.
t/pureperl/reduce_1.t ............. ok
t/pureperl/reduce_u.t ............. ok
t/pureperl/samples.t .............. ok
t/pureperl/singleton.t ............ ok
Name "main::a" used only once: possible typo at t/pureperl/slide.t line 16.
Name "main::b" used only once: possible typo at t/pureperl/slide.t line 16.
t/pureperl/slide.t ................ ok
t/pureperl/slideatatime.t ......... ok
t/pureperl/true.t ................. ok
t/pureperl/uniq.t ................. ok
t/pureperl/upper_bound.t .......... ok
t/pureperl/XS.t ................... ok
t/pureperl/zip6.t ................. ok
t/xs/after.t ...................... ok
t/xs/after_incl.t ................. ok
t/xs/all.t ........................ ok
t/xs/all_u.t ...................... ok
t/xs/any.t ........................ ok
t/xs/any_u.t ...................... ok
t/xs/apply.t ...................... ok
t/xs/arrayify.t ................... ok
t/xs/before.t ..................... ok
t/xs/before_incl.t ................ ok
t/xs/binsert.t .................... ok
t/xs/bremove.t .................... ok
t/xs/bsearch.t .................... ok
t/xs/bsearchidx.t ................. ok
t/xs/duplicates.t ................. ok
t/xs/each_array.t ................. ok
t/xs/equal_range.t ................ ok
t/xs/false.t ...................... ok
t/xs/firstidx.t ................... ok
t/xs/firstres.t ................... ok
t/xs/firstval.t ................... ok
t/xs/frequency.t .................. ok
t/xs/Import.t ..................... ok
t/xs/indexes.t .................... ok
t/xs/insert_after.t ............... ok
t/xs/insert_after_string.t ........ ok
t/xs/lastidx.t .................... ok
t/xs/lastres.t .................... ok
t/xs/lastval.t .................... ok
t/xs/listcmp.t .................... ok
t/xs/lower_bound.t ................ ok
t/xs/mesh.t ....................... ok
t/xs/minmax.t ..................... ok
t/xs/minmaxstr.t .................. ok
t/xs/mode.t ....................... ok
t/xs/natatime.t ................... ok
t/xs/none.t ....................... ok
t/xs/none_u.t ..................... ok
t/xs/notall.t ..................... ok
t/xs/notall_u.t ................... ok
t/xs/occurrences.t ................ ok
t/xs/one.t ........................ ok
t/xs/one_u.t ...................... ok
t/xs/onlyidx.t .................... ok
t/xs/onlyres.t .................... ok
t/xs/onlyval.t .................... ok
t/xs/pairwise.t ................... ok
t/xs/part.t ....................... ok
t/xs/qsort.t ...................... ok
t/xs/reduce_0.t ................... ok
Name "main::a" used only once: possible typo at t/xs/reduce_1.t line 36.
t/xs/reduce_1.t ................... ok
t/xs/reduce_u.t ................... ok
t/xs/samples.t .................... ok
t/xs/singleton.t .................. ok
Name "main::a" used only once: possible typo at t/xs/slide.t line 16.
Name "main::b" used only once: possible typo at t/xs/slide.t line 16.
t/xs/slide.t ...................... ok
t/xs/slideatatime.t ............... ok
t/xs/true.t ....................... ok
t/xs/uniq.t ....................... ok
t/xs/upper_bound.t ................ ok
t/xs/XS.t ......................... ok
t/xs/zip6.t ....................... ok
All tests successful.
Files=122, Tests=9066, 18 wallclock secs ( 0.83 usr 0.18 sys + 16.25 cusr 0.83 csys = 18.09 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Exporter::Tiny 1.004001 0.038
ExtUtils::MakeMaker 7.64 0
List::MoreUtils::XS 0.430 0.430
Storable 3.25 0
Test::LeakTrace 0.17 0
Test::More 1.302190 0.96
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.64
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.64
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.44
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.14
Test2 1.302190
Test::Harness 3.44
Test::More 1.302190
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games
PERL5LIB = /home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5:/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/lib:/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 14193
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/64bit-ld/conf/perl-5.12.5
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/9Mqz3t6QO9
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/9Mqz3t6QO9"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/9Mqz3t6QO9
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/64bit-ld/perl-5.12.5/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 5) configuration:
Platform:
osname=linux, osvers=5.10.0-12-686, archname=i686-linux-64int-ld
uname='linux dagobah 5.10.0-12-686 #1 smp debian 5.10.103-1 (2022-03-07) i686 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/64bit-ld/perl-5.12.5 -Duse64bitint -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='10.2.1 20210110', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP USE_64_BIT_INT
USE_LARGE_FILES USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 2.08
Built under linux
Compiled at Mar 20 2022 05:10:58
%ENV:
PERL5LIB="/home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5:/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/lib:/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="14193"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/64bit-ld/conf/perl-5.12.5"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/9Mqz3t6QO9"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/9Mqz3t6QO9""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/9Mqz3t6QO9"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5/5.12.5/i686-linux-64int-ld
/home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5/5.12.5
/home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5/i686-linux-64int-ld
/home/cpan/pit/jail/9Mqz3t6QO9/lib/perl5
/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/lib
/home/cpan/pit/64bit-ld/conf/perl-5.12.5/.cpanplus/5.12.5/build/okYukys5pR/List-MoreUtils-0.430/blib/arch
/home/cpan/pit/64bit-ld/perl-5.12.5/lib/site_perl/5.12.5/i686-linux-64int-ld
/home/cpan/pit/64bit-ld/perl-5.12.5/lib/site_perl/5.12.5
/home/cpan/pit/64bit-ld/perl-5.12.5/lib/5.12.5/i686-linux-64int-ld
/home/cpan/pit/64bit-ld/perl-5.12.5/lib/5.12.5
.