Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: NA Barcode-Code128-2.21 v5.8.9 NetBSD
Date: 2016-03-28T01:59:59Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear William R Ward,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare/perl-5.8.9/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/barcode.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/3 subtests
# Failed test 'use Barcode::Code128;'
# at t/barcode.t line 9.
# Tried to use 'Barcode::Code128'.
# Error: Perl v5.10.0 required--this is only v5.8.9, stopped at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib/Barcode/Code128.pm line 1.
# Compilation failed in require at t/barcode.t line 9.
# BEGIN failed--compilation aborted at t/barcode.t line 9.
Unable to start with ``C'' at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib/Barcode/Code128.pm line 687
Barcode::Code128::start('Barcode::Code128=HASH(0x7f7ff7b023b0)', 'C') called at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib/Barcode/Code128.pm line 621
Barcode::Code128::encode('Barcode::Code128=HASH(0x7f7ff7b023b0)', '1234 abcd') called at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib/Barcode/Code128.pm line 551
Barcode::Code128::barcode('Barcode::Code128=HASH(0x7f7ff7b023b0)', '1234 abcd') called at t/barcode.t line 16
# Looks like you planned 3 tests but ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test exited with 255 just after 2.
Perl v5.10.0 required--this is only v5.8.9, stopped at lib//Barcode/Code128.pm line 1.
Compilation failed in require at t/gif.t line 7.
BEGIN failed--compilation aborted at t/gif.t line 7.
# Looks like your test exited with 2 before it could output anything.
t/gif.t ......
Dubious, test returned 2 (wstat 512, 0x200)
Failed 294/294 subtests
Perl v5.10.0 required--this is only v5.8.9, stopped at /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib/Barcode/Code128.pm line 1.
Compilation failed in require at t/png.t line 12.
BEGIN failed--compilation aborted at t/png.t line 12.
# Looks like your test exited with 2 before it could output anything.
t/png.t ......
Dubious, test returned 2 (wstat 512, 0x200)
Failed 294/294 subtests
Test Summary Report
-------------------
t/barcode.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 2.
t/gif.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 294 tests but ran 0.
t/png.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 294 tests but ran 0.
Files=3, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: FAIL
*** Error code 2
Stop.
make: stopped in /home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21
Failed 3/3 test programs. 1/2 subtests failed.
[MSG] [Mon Mar 28 02:59:59 2016] 'Barcode::Code128' requires a higher version of perl than your current version -- sending N/A grade.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.10 0
File::Spec 3.60 0
Test::More 1.001014 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9156
CPANPLUS::Dist::Build 0.78
Cwd 3.60
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.10
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.10
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.60
Module::Build 0.4214
Pod::Parser 1.35
Pod::Simple 3.28
Test::Harness 3.35
Test::More 1.001014
version 0.9912
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R7/bin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2205
PERL5_CPANPLUS_IS_VERSION = 0.9156
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare/conf/perl-5.8.9
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare/perl-5.8.9/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 9) configuration:
Platform:
osname=netbsd, osvers=6.1.5, archname=amd64-netbsd
uname='netbsd nhw.bingosnet.co.uk 6.1.5 netbsd 6.1.5 (generic) amd64 '
config_args='-des -Dprefix=/home/cpan/pit/bare/perl-5.8.9'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='4.5.3', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix
perllibs=-lm -lcrypt -lutil -lc -lposix
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Characteristics of this binary (from libperl):
Compile-time options: PERL_MALLOC_WRAP USE_64_BIT_ALL USE_64_BIT_INT
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under netbsd
Compiled at Oct 7 2014 18:23:45
%ENV:
PERL5LIB=":/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib:/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2205"
PERL5_CPANPLUS_IS_VERSION="0.9156"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare/conf/perl-5.8.9"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/lib
/home/cpan/pit/bare/conf/perl-5.8.9/.cpanplus/5.8.9/build/6zYkQmB02Y/Barcode-Code128-2.21/blib/arch
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/5.8.9
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9/amd64-netbsd
/home/cpan/pit/bare/perl-5.8.9/lib/site_perl/5.8.9
.