Inline-C v0.81 Perl 5 v5.33.1 x86_64-cygwin-thread-multi
- Status
- Pass
- From
- Peter John Acklam (PJACKLAM)
- Dist
-
Inline-C v0.81
- Platform
- Perl 5 v5.33.1 x86_64-cygwin-thread-multi
- Date
- 2020-09-21 16:44:47
- ID
- c77dff1c-6c2e-1014-9d77-fb6329dee5e3
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tina Muller,
This is a computer-generated report for Inline-C-0.81
on perl 5.33.1, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
Skip blib/lib/auto/share/dist/Inline-C/inline-c.pgx (unchanged)
PERL_DL_NONLAZY=1 "/cygdrive/c/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/bin/perl5.33.1.exe" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/000-require-modules.t ............ ok
t/01syntax.t ....................... ok
t/02config.t ....................... ok
t/03typemap.t ...................... ok
t/04perlapi.t ...................... ok
t/05xsmode.t ....................... ok
t/06parseregexp.t .................. ok
t/07typemap_multi.t ................ ok
t/08taint.t ........................ ok
This test could take a couple of minutes to run
t/09parser.t ....................... ok
t/10callback.t ..................... ok
t/11default_readonly.t ............. ok
t/14void_arg.t ..................... ok
t/14void_arg_PRD.t ................. ok
t/15ccflags.t ...................... ok
t/16ccflagsex.t .................... ok
t/17prehead.t ...................... ok
t/18quote_space.t .................. ok
t/19INC.t .......................... ok
t/20eval.t ......................... ok
t/21read_DATA.t .................... ok
t/22read_DATA_2.t .................. ok
t/23validate.t ..................... ok
t/24prefix.t ....................... ok
t/25proto.t ........................ ok
t/26fork.t ......................... ok
Use of uninitialized value in numeric eq (==) at
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/lib/5.33.1/x86_64-cygwin-thread-multi/IO/Select.pm line 71 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you
the name of the variable (if any) that was undefined. In some cases
it cannot do this, so it also tells you what operation you used the
undefined value in. Note, however, that perl optimizes your program
and the operation displayed in the warning may not necessarily appear
literally in your program. For example, "that $foo" is usually
optimized into "that " . $foo, and the warning will refer to the
concatenation (.) operator, even though there is no . in
your program.
t/27inline_maker.t ................. ok
t/28autowrap.t ..................... ok
t/29refargs.t ...................... ok
t/30cppflags.t ..................... ok
t/31include_dirs_angle_brackets.t .. ok
t/32include_dirs_double_quotes.t ... ok
t/33intended_double_quotes.t ....... ok
t/author-pod-syntax.t .............. skipped: these tests are for testing by the author
t/parse-pegex.t .................... ok
t/pegex-parser.t ................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
All tests successful.
Test Summary Report
-------------------
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=36, Tests=161, 10337 wallclock secs ( 0.39 usr 1.03 sys + 1057.28 cusr 2430.59 csys = 3489.30 CPU)
Result: PASS
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------------- -------- --------
ExtUtils::MakeMaker 7.00 7.46
File::Spec 0.8 3.78
Inline 0.83 0.86
Parse::RecDescent 1.967009 1.967015
Pegex 0.66 0.75
perl 5.008001 5.033001
build_requires:
Module Need Have
----------------------- -------- --------
autodie 0 2.32
ExtUtils::MakeMaker 0 7.46
File::Copy::Recursive 0 0.45
File::Path 0 2.17
Test::More 0.88 1.302181
Test::Warn 0.23 0.36
version 0.77 0.9927
YAML::XS 0 0.82
configure_requires:
Module Need Have
----------------------- -------- --------
ExtUtils::MakeMaker 0 7.46
File::ShareDir::Install 0.06 0.13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
LDFLAGS = -Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib
NONINTERACTIVE_TESTING = 1
NUMBER_OF_PROCESSORS = 12
PATH = /usr/local/bin:/usr/bin:/bin
PERL5LIB = /opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/site_perl:/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/perl5:/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 45002
PERL5_CPAN_IS_RUNNING = 45002
PERL_CPAN_REPORTER_CONFIG = /cygdrive/c/peter/.cpanreporter/config-cygwin-OS-A01-L0123.ini
PERL_EXTUTILS_AUTOINSTALL = 1
PERL_MM_USE_DEFAULT = 1
PERL_TEST_CRITIC = 1
PERL_TEST_CRITIC = 1
PERL_TEST_POD = 1
PERL_TEST_POD = 1
PERL_USE_UNSAFE_INC = 1
POD_TESTING = 1
POD_TESTS = 1
PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 158 Stepping 10, GenuineIntel
SHELL = /bin/bash
TEMP = /tmp
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /cygdrive/c/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/bin/perl5.33.1
$UID/$EUID = 1061331 / 1061331
$GID = 1049089 1049089 197609 578 545 4 66049 11 15 4095 66048 1104222 1150627 1098011 1051245 1113266 1089123 1139839 1090502 1141767 1081310 1090413 1061909 1058653 1081942 1122108 1125494 1137338 1083675 1137546 1088201 1143577 1138331 1090906 1093944 1122107 1051228 1057394 1141985 1090221 1138202 1056539 1057337 1089132 1100278 1051354 1104220 1059243 1089865 1138328 1087957 1105777 1150082 1135663 1049649 1125495 1139179 1069945 1059531 1090104 1090492 1068897 1081637 1095782 1075170 1144155 1139332 1146142 1111057 1137882 1069144 1081620 70145 1049147 1136188 1083352 401408
$EGID = 1049089 1049089 197609 578 545 4 66049 11 15 4095 66048 1104222 1150627 1098011 1051245 1113266 1089123 1139839 1090502 1141767 1081310 1090413 1061909 1058653 1081942 1122108 1125494 1137338 1083675 1137546 1088201 1143577 1138331 1090906 1093944 1122107 1051228 1057394 1141985 1090221 1138202 1056539 1057337 1089132 1100278 1051354 1104220 1059243 1089865 1138328 1087957 1105777 1150082 1135663 1049649 1125495 1139179 1069945 1059531 1090104 1090492 1068897 1081637 1095782 1075170 1144155 1139332 1146142 1111057 1137882 1069144 1081620 70145 1049147 1136188 1083352 401408
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.28
CPAN::Meta 2.150010
Cwd 3.78
ExtUtils::CBuilder 0.280234
ExtUtils::Command 7.46
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.46
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.41
File::Spec 3.78
JSON 4.02
JSON::PP 4.05
Module::Build 0.4231
Module::Signature 0.87
Parse::CPAN::Meta 2.150010
Test::Harness 3.42
Test::More 1.302181
YAML 1.30
YAML::Syck 1.32
version 0.9927
--
Summary of my perl5 (revision 5 version 33 subversion 1) configuration:
Platform:
osname=cygwin
osvers=3.1.6(0.34053)
archname=x86_64-cygwin-thread-multi
uname='cygwin_nt-10.0 os-a01-l0123 3.1.6(0.34053) 2020-07-09 08:20 x86_64 cygwin '
config_args='-de -Dmksymlinks -Dusedevel -Uinc_version_list -Uinstallusrbinperl -Dusethreads -Dusemultiplicity -Uusequadmath -Dprefix=/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi -Darchname=x86_64-cygwin-thread-multi'
hint=recommended
useposix=true
d_sigaction=define
useithreads=define
usemultiplicity=define
use64bitint=define
use64bitall=define
uselongdouble=undef
usemymalloc=n
default_inc_excludes_dot=define
Compiler:
cc='gcc'
ccflags ='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_FORTIFY_SOURCE=2'
optimize='-O3'
cppflags='-DPERL_USE_SAFE_PUTENV -U__STRICT_ANSI__ -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='9.3.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='double'
nvsize=8
Off_t='off_t'
lseeksize=8
alignbytes=8
prototype=define
Linker and Libraries:
ld='g++'
ldflags =' -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--enable-auto-image-base -fstack-protector-strong -L/usr/local/lib'
libpth=/cygdrive/c/share/apps/gcc-9.3.0/cygwin-3-x86_64/bin/../lib/gcc/x86_64-pc-cygwin/9.3.0/include-fixed /usr/local/lib /cygdrive/c/share/apps/gcc-9.3.0/cygwin-3-x86_64/bin/../lib/gcc/../../lib /usr/lib /usr/lib/../lib/../include/w32api /lib
libs=-lpthread -ldl
perllibs=-lpthread -ldl
libc=/usr/lib/libc.a
so=dll
useshrplib=true
libperl=cygperl5_33_1.dll
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=dll
d_dlsymun=undef
ccdlflags=' '
cccdlflags=' '
lddlflags=' --shared -Wl,--enable-auto-import -Wl,--export-all-symbols -Wl,--enable-auto-image-base -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
MULTIPLICITY
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
PERL_USE_DEVEL
PERL_USE_SAFE_PUTENV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_ITHREADS
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_PERLIO
USE_PERL_ATOF
USE_REENTRANT_API
USE_THREAD_SAFE_LOCALE
Built under cygwin
Compiled at Aug 21 2020 18:39:12
%ENV:
PERL5LIB="/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/site_perl:/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/perl5:/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="45002"
PERL5_CPAN_IS_RUNNING="45002"
PERL_CPAN_REPORTER_CONFIG="/cygdrive/c/peter/.cpanreporter/config-cygwin-OS-A01-L0123.ini"
PERL_EXTUTILS_AUTOINSTALL="1"
PERL_MM_USE_DEFAULT="1"
PERL_TEST_CRITIC="1"
PERL_TEST_POD="1"
PERL_USE_UNSAFE_INC="1"
@INC:
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/site_perl/5.33.1/x86_64-cygwin-thread-multi
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/site_perl/5.33.1
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/site_perl
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/perl5/5.33.1
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/perl5/x86_64-cygwin-thread-multi
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/perl5
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/5.33.1/x86_64-cygwin-thread-multi
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib/5.33.1
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/local/lib
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/lib/site_perl/5.33.1/x86_64-cygwin-thread-multi
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/lib/site_perl/5.33.1
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/lib/5.33.1/x86_64-cygwin-thread-multi
/opt/perl5/cygwin_nt-10.0/3.1.6/x86_64/perl/5.33.1/x86_64-cygwin-thread-multi/lib/5.33.1
.