Net-AMQP v0.06 Perl 5 v5.18.3 i686-linux-thread-multi
- Status
- Fail
- From
- Nigel Horne
- Dist
-
Net-AMQP v0.06
- Platform
- Perl 5 v5.18.3 i686-linux-thread-multi
- Date
- 2018-07-29T16:02:24
- ID
- c84e8c5a-9348-11e8-8fb1-ef5133556b3f
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Chip Salzenberg,
This is a computer-generated report for Net-AMQP-0.06
on perl 5.18.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build test':
t/01_basic.t .............. ok
Invalid type 'q' in pack at /home/njh/.cpan/build/Net-AMQP-0.06-0/blib/lib/Net/AMQP/Common.pm line 134, <DATA> chunk 1.
# Looks like your test exited with 255 just after 18.
t/02_ruby_protocol_doc.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/23 subtests
Invalid type 'Q' in pack at /home/njh/.cpan/build/Net-AMQP-0.06-0/blib/lib/Net/AMQP/Common.pm line 137.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 10.
t/04_table.t ..............
Dubious, test returned 255 (wstat 65280, 0xff00)
All 10 subtests passed
Invalid type 'q' in pack at /home/njh/.cpan/build/Net-AMQP-0.06-0/blib/lib/Net/AMQP/Common.pm line 134, <DATA> chunk 1.
# Looks like your test exited with 255 just after 19.
t/03_standalone_0_8.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/24 subtests
t/50_autodocs.t ........... ok
Test Summary Report
-------------------
t/02_ruby_protocol_doc.t (Wstat: 65280 Tests: 18 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 23 tests but ran 18.
t/04_table.t (Wstat: 65280 Tests: 10 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/03_standalone_0_8.t (Wstat: 65280 Tests: 19 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 24 tests but ran 19.
Files=5, Tests=55, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.75 cusr 0.15 csys = 1.94 CPU)
Result: FAIL
Failed 3/5 test programs. 0/55 subtests failed.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------------ ---- --------
Class::Accessor 0 0.51
Class::Data::Inheritable 0 0.08
Scalar::Util 0 1.49
XML::LibXML 0 2.0132
build_requires:
Module Need Have
------------------------ ---- --------
File::Temp 0.19 0.23
Test::Deep 0 1.127
Test::More 0.88 1.302136
configure_requires:
Module Need Have
------------------------ ---- --------
Module::Build 0.40 0.4224
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
HARNESS_OPTIONS = j2
LANG = en_US.UTF-8
PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.18.3/bin:/home/njh/src/njh/smoker/bin:/usr/bin:/bin
PERL5LIB = /home/njh/.cpan/build/Mojolicious-7.88-0/blib/arch:/home/njh/.cpan/build/Mojolicious-7.88-0/blib/lib:/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/arch:/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1171
PERL5_CPAN_IS_RUNNING = 1171
PERLBREW_BASHRC_VERSION = 0.73
PERLBREW_HOME = /home/njh/.perlbrew
PERLBREW_MANPATH = /home/njh/perl5/perlbrew/perls/perl-5.18.3/man
PERLBREW_PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.18.3/bin
PERLBREW_PERL = perl-5.18.3
PERLBREW_ROOT = /home/njh/perl5/perlbrew
PERLBREW_VERSION = 0.73
SHELL = /bin/sh
TEMP = /tmp/user/1000
TMPDIR = /tmp/user/1000/testwrapper.1159
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/njh/perl5/perlbrew/perls/perl-5.18.3/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 24 25 29 30 44 46 108 1000
$EGID = 1000 4 24 25 29 30 44 46 108 1000
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.143240
Cwd 3.74
ExtUtils::CBuilder 0.280210
ExtUtils::Command 7.30
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.30
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.18
File::Spec 3.74
JSON 2.97001
JSON::PP 2.97001
Module::Build 0.4224
Module::Signature n/a
Parse::CPAN::Meta 1.4414
Test::Harness 3.39
Test::More 1.302136
YAML 1.26
YAML::Syck 1.30
version 0.9902
--
Summary of my perl5 (revision 5 version 18 subversion 3) configuration:
Platform:
osname=linux, osvers=4.3.0-1-686-pae, archname=i686-linux-thread-multi
uname='linux zack 4.3.0-1-686-pae #1 smp debian 4.3.5-1 (2016-02-06) i686 gnulinux '
config_args='-de -Dprefix=/home/njh/perl5/perlbrew/perls/perl-5.18.3 -Duseithreads -Dusemultiplicity -Dusedevel -Accflags= -Aeval:scriptdir=/home/njh/perl5/perlbrew/perls/perl-5.18.3/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='6.4.0 20170704', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/i386-linux-gnu /lib/../lib /usr/lib/i386-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_SAWAMPERSAND PERL_USE_DEVEL
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Locally applied patches:
Devel::PatchPerl 1.38
Built under linux
Compiled at Jul 27 2017 00:55:10
%ENV:
PERL5LIB="/home/njh/.cpan/build/Mojolicious-7.88-0/blib/arch:/home/njh/.cpan/build/Mojolicious-7.88-0/blib/lib:/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/arch:/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="1171"
PERL5_CPAN_IS_RUNNING="1171"
PERLBREW_BASHRC_VERSION="0.73"
PERLBREW_HOME="/home/njh/.perlbrew"
PERLBREW_MANPATH="/home/njh/perl5/perlbrew/perls/perl-5.18.3/man"
PERLBREW_PATH="/home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.18.3/bin"
PERLBREW_PERL="perl-5.18.3"
PERLBREW_ROOT="/home/njh/perl5/perlbrew"
PERLBREW_VERSION="0.73"
@INC:
/home/njh/.cpan/build/Mojolicious-7.88-0/blib/arch
/home/njh/.cpan/build/Mojolicious-7.88-0/blib/lib
/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/arch
/home/njh/.cpan/build/IO-Socket-IP-0.39-0/blib/lib
/home/njh/perl5/perlbrew/perls/perl-5.18.3/lib/site_perl/5.18.3/i686-linux-thread-multi
/home/njh/perl5/perlbrew/perls/perl-5.18.3/lib/site_perl/5.18.3
/home/njh/perl5/perlbrew/perls/perl-5.18.3/lib/5.18.3/i686-linux-thread-multi
/home/njh/perl5/perlbrew/perls/perl-5.18.3/lib/5.18.3
.