Alien-libmariadbclient v0.01 Perl 5 v5.14.0 x86_64-linux-ld
- Status
- Unknown
- From
- Chris Williams (BINGOS)
- Dist
-
Alien-libmariadbclient v0.01
- Platform
- Perl 5 v5.14.0 x86_64-linux-ld
- Date
- 2022-03-02 12:46:33
- ID
- ca37d81c-9a26-11ec-bc66-57723b537541
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear B Fraser,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
cp lib/Alien/libmariadbclient.pm blib/lib/Alien/libmariadbclient.pm
"/home/cpan/pit/bare-ld/perl-5.14.0/bin/perl" -MAlien::Build::MM=cmd -e prefix site /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
main> prefix /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld/auto/share/dist/Alien-libmariadbclient
"/home/cpan/pit/bare-ld/perl-5.14.0/bin/perl" -MAlien::Build::MM=cmd -e version 0.01
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
"/home/cpan/pit/bare-ld/perl-5.14.0/bin/perl" -MAlien::Build::MM=cmd -e download
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-filename :%{filename_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-content_type :%{content_type}\n
Alien::Build::Plugin::Fetch::CurlCommand> writeout: ab-url :%{url_effective}\n
Alien::Build::Plugin::Fetch::CurlCommand> + /usr/bin/curl -L -f -O -J -w @writeout https://github.com/mariadb-corporation/mariadb-connector-c/archive/v3.1.11.tar.gz
Alien::Build::Plugin::Core::Download> downloaded mariadb-connector-c-3.1.11.tar.gz
"/home/cpan/pit/bare-ld/perl-5.14.0/bin/perl" -MAlien::Build::MM=cmd -e build
Alien::Build::Plugin::PkgConfig::Negotiate> Using PkgConfig plugin: PkgConfig::CommandLine
Alien::Build::CommandSequence> + patch -p1 < /home/cpan/pit/bare-ld/conf/perl-5.14.0/.cpanplus/5.14.0/build/MkQes1g9Ri/Alien-libmariadbclient-0.01/patch/0001-statically-link-against-auth-plugins.patch
patching file plugins/auth/CMakeLists.txt
Alien::Build::CommandSequence> + cmake . -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWITH_SSL=OPENSSL -DWITH_EXTERNAL_ZLIB=yes -G Unix Makefiles -DCMAKE_POSITION_INDEPENDENT_CODE:BOOL=true -DCMAKE_INSTALL_PREFIX:PATH=/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld/auto/share/dist/Alien-libmariadbclient -DCMAKE_INSTALL_LIBDIR:PATH=lib -DCMAKE_MAKE_PROGRAM:PATH=make /home/cpan/pit/bare-ld/conf/perl-5.14.0/.cpanplus/5.14.0/build/MkQes1g9Ri/Alien-libmariadbclient-0.01/_alien/build_ND4O/mariadb-connector-c-3.1.11
CMake Deprecation Warning at CMakeLists.txt:5 (CMAKE_MINIMUM_REQUIRED):
Compatibility with CMake < 2.8.12 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- The C compiler identification is GNU 9.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Could NOT find CURL (missing: CURL_LIBRARY CURL_INCLUDE_DIR)
-- Performing Test HAS_-Wunused_FLAG
-- Performing Test HAS_-Wunused_FLAG - Success
-- Performing Test HAS_-Wlogical-op_FLAG
-- Performing Test HAS_-Wlogical-op_FLAG - Success
-- Performing Test HAS_-Wno-uninitialized_FLAG
-- Performing Test HAS_-Wno-uninitialized_FLAG - Success
-- Performing Test HAS_-Wall_FLAG
-- Performing Test HAS_-Wall_FLAG - Success
-- Performing Test HAS_-Wextra_FLAG
-- Performing Test HAS_-Wextra_FLAG - Success
-- Performing Test HAS_-Wformat-security_FLAG
-- Performing Test HAS_-Wformat-security_FLAG - Success
-- Performing Test HAS_-Wno-init-self_FLAG
-- Performing Test HAS_-Wno-init-self_FLAG - Success
-- Performing Test HAS_-Wwrite-strings_FLAG
-- Performing Test HAS_-Wwrite-strings_FLAG - Success
-- Performing Test HAS_-Wshift-count-overflow_FLAG
-- Performing Test HAS_-Wshift-count-overflow_FLAG - Success
-- Performing Test HAS_-Wdeclaration-after-statement_FLAG
-- Performing Test HAS_-Wdeclaration-after-statement_FLAG - Success
-- Performing Test HAS_-Wno-undef_FLAG
-- Performing Test HAS_-Wno-undef_FLAG - Success
-- Performing Test HAS_-Wno-unknown-pragmas_FLAG
-- Performing Test HAS_-Wno-unknown-pragmas_FLAG - Success
-- Found Git: /usr/bin/git (found version "2.25.1")
-- MariaDB Connector C: INSTALL_BINDIR=bin
-- MariaDB Connector C: INSTALL_LIBDIR=lib/mariadb
-- MariaDB Connector C: INSTALL_PCDIR=lib/pkgconfig
-- MariaDB Connector C: INSTALL_INCLUDEDIR=include/mariadb
-- MariaDB Connector C: INSTALL_DOCSDIR=
-- MariaDB Connector C: INSTALL_PLUGINDIR=lib/mariadb/plugin
-- MariaDB Connector C: LIBMARIADB_STATIC_NAME mariadbclient
-- Found ZLIB: /usr/lib/x86_64-linux-gnu/libz.so (found version "1.2.11")
-- Looking for include file alloca.h
-- Looking for include file alloca.h - found
-- Looking for include file arpa/inet.h
-- Looking for include file arpa/inet.h - found
-- Looking for include file dlfcn.h
-- Looking for include file dlfcn.h - found
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Looking for include file float.h
-- Looking for include file float.h - found
-- Looking for include file limits.h
-- Looking for include file limits.h - found
-- Looking for include file linux/limits.h
-- Looking for include file linux/limits.h - found
-- Looking for include file pwd.h
-- Looking for include file pwd.h - found
-- Looking for include file sched.h
-- Looking for include file sched.h - found
-- Looking for include file select.h
-- Looking for include file select.h - not found
-- Looking for include file signal.h
-- Looking for include file signal.h - found
-- Looking for include file stddef.h
-- Looking for include file stddef.h - found
-- Looking for include file stdint.h
-- Looking for include file stdint.h - found
-- Looking for include file stdlib.h
-- Looking for include file stdlib.h - found
-- Looking for include file string.h
-- Looking for include file string.h - found
-- Looking for include file strings.h
-- Looking for include file strings.h - found
-- Looking for include file sys/ioctl.h
-- Looking for include file sys/ioctl.h - found
-- Looking for include file sys/select.h
-- Looking for include file sys/select.h - found
-- Looking for include file sys/socket.h
-- Looking for include file sys/socket.h - found
-- Looking for include file sys/types.h
-- Looking for include file sys/types.h - found
-- Looking for include file sys/stat.h
-- Looking for include file sys/stat.h - found
-- Looking for include file sys/un.h
-- Looking for include file sys/un.h - found
-- Looking for include file unistd.h
-- Looking for include file unistd.h - found
-- Looking for include file utime.h
-- Looking for include file utime.h - found
-- Looking for include file ucontext.h
-- Looking for include file ucontext.h - found
-- Looking for alloca
-- Looking for alloca - not found
-- Looking for dlerror
-- Looking for dlerror - not found
-- Looking for dlopen
-- Looking for dlopen - not found
-- Looking for fcntl
-- Looking for fcntl - found
-- Looking for memcpy
-- Looking for memcpy - found
-- Looking for nl_langinfo
-- Looking for nl_langinfo - found
-- Looking for setlocale
-- Looking for setlocale - found
-- Looking for poll
-- Looking for poll - found
-- Looking for getpwuid
-- Looking for getpwuid - found
-- Looking for makecontext
-- Looking for makecontext - found
-- Looking for cuserid
-- Looking for cuserid - found
-- Check size of char *
-- Check size of char * - done
-- Check size of int
-- Check size of int - done
-- Check size of long
-- Check size of long - done
-- Check size of long long
-- Check size of long long - done
-- Check size of size_t
-- Check size of size_t - done
-- Check size of uchar
-- Check size of uchar - failed
-- Check size of uint
-- Check size of uint - done
-- Check size of ulong
-- Check size of ulong - done
-- Check size of int8
-- Check size of int8 - failed
-- Check size of uint8
-- Check size of uint8 - failed
-- Check size of int16
-- Check size of int16 - failed
-- Check size of uint16
-- Check size of uint16 - failed
-- Check size of int32
-- Check size of int32 - failed
-- Check size of uint32
-- Check size of uint32 - failed
-- Check size of int64
-- Check size of int64 - failed
-- Check size of uint64
-- Check size of uint64 - failed
-- Check size of socklen_t
-- Check size of socklen_t - failed
-- Performing Test SOCKET_SIZE_FOUND_socklen_t
-- Performing Test SOCKET_SIZE_FOUND_socklen_t - Success
-- Looking for floor
-- Looking for floor - not found
-- Looking for floor in m
-- Looking for floor in m - found
-- Looking for pthread_getspecific
-- Looking for pthread_getspecific - not found
-- Looking for pthread_getspecific in pthread
-- Looking for pthread_getspecific in pthread - found
-- Looking for gethostbyname_r
-- Looking for gethostbyname_r - found
-- Looking for setsockopt
-- Looking for setsockopt - found
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE
-- Found OpenSSL: /usr/lib/x86_64-linux-gnu/libcrypto.so (found version "1.1.1f")
-- TLS library/version: OpenSSL 1.1.1f
-- SYSTEM_LIBS /usr/lib/x86_64-linux-gnu/libz.so;dl;m;pthread;pthread;dl;m;/usr/lib/x86_64-linux-gnu/libssl.so;/usr/lib/x86_64-linux-gnu/libcrypto.so
-- Could NOT find CURL (missing: CURL_LIBRARY CURL_INCLUDE_DIR)
-- Dynamic column API support: ON
-- SYSTEM processor: x86_64
CMake Error at cmake/ConnectorName.cmake:30 (ENDMACRO):
Flow control statements are not properly nested.
Call Stack (most recent call first):
CMakeLists.txt:423 (INCLUDE)
-- Configuring incomplete, errors occurred!
See also "/home/cpan/pit/bare-ld/conf/perl-5.14.0/.cpanplus/5.14.0/build/MkQes1g9Ri/Alien-libmariadbclient-0.01/_alien/build_ND4O/mariadb-connector-c-3.1.11/CMakeFiles/CMakeOutput.log".
See also "/home/cpan/pit/bare-ld/conf/perl-5.14.0/.cpanplus/5.14.0/build/MkQes1g9Ri/Alien-libmariadbclient-0.01/_alien/build_ND4O/mariadb-connector-c-3.1.11/CMakeFiles/CMakeError.log".
external command failed at /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/Alien/Build/CommandSequence.pm line 72.
make: *** [Makefile:1004: _alien/mm/build] Error 1
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Alien::Base 2.46 0.038
Alien::Build 2.46 0.25
Alien::Build::MM 2.46 0.25
Alien::Build::Plugin::Build::CMake 2.46 0
Alien::cmake3 0.08 0.02
Archive::Tar 2.40 0
IO::Zlib 1.11 0
Mojo::DOM58 3.001 1.00
Sort::Versions 1.62 0
Test::More 1.302188 0
URI 5.10 0
URI::Escape 5.10 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.62
ExtUtils::Install 2.20
ExtUtils::MakeMaker 7.62
ExtUtils::Manifest 1.73
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4231
Pod::Parser 1.37
Pod::Simple 3.16
Test2 1.302188
Test::Harness 3.42
Test::More 1.302188
version 0.9929
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/wMK5VW0YuM/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 1429063
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.14.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/wMK5VW0YuM
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/wMK5VW0YuM"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/wMK5VW0YuM
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.14.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 14 subversion 0) configuration:
Platform:
osname=linux, osvers=5.4.0-26-generic, archname=x86_64-linux-ld
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.14.0 -Duselongdouble'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='9.3.0', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib /usr/lib
libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LONG_DOUBLE USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 27 2020 12:00:52
%ENV:
PERL5LIB="/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5"
PERL5_CPANPLUS_IS_RUNNING="1429063"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.14.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/wMK5VW0YuM"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/wMK5VW0YuM""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/wMK5VW0YuM"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/5.14.0/x86_64-linux-ld
/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/5.14.0
/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/wMK5VW0YuM/lib/perl5
/home/cpan/pit/bare-ld/perl-5.14.0/lib/site_perl/5.14.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.14.0/lib/site_perl/5.14.0
/home/cpan/pit/bare-ld/perl-5.14.0/lib/5.14.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.14.0/lib/5.14.0
.