CodeGen-Cpppp v0.004 Perl 5 v5.26.1 x86_64-linux-ld
- Status
- Fail
- From
- Chris Williams (BINGOS)
- Dist
-
CodeGen-Cpppp v0.004
- Platform
- Perl 5 v5.26.1 x86_64-linux-ld
- Date
- 2024-07-12 23:52:26
- ID
- ca9ece9c-40a9-11ef-98b0-b3c3213a625c
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear NERDVANA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9914. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/home/cpan/pit/bare-ld/perl-5.26.1/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/05-antichar.t ............... ok
t/07-c-parser.t ............... ok
t/08-enum.t ................... ok
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/10-parse-code-block.t line 5.
BEGIN failed--compilation aborted at t/10-parse-code-block.t line 5.
t/10-parse-code-block.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/20-translate-cpppp.t line 5.
BEGIN failed--compilation aborted at t/20-translate-cpppp.t line 5.
t/20-translate-cpppp.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/21-parameters.t line 5.
BEGIN failed--compilation aborted at t/21-parameters.t line 5.
t/21-parameters.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/22-methods.t line 5.
BEGIN failed--compilation aborted at t/22-methods.t line 5.
t/22-methods.t ................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/23-output-sections.t line 5.
BEGIN failed--compilation aborted at t/23-output-sections.t line 5.
t/23-output-sections.t ........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/24-detect-indent-context.t line 5.
BEGIN failed--compilation aborted at t/24-detect-indent-context.t line 5.
t/24-detect-indent-context.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/30-render.t line 5.
BEGIN failed--compilation aborted at t/30-render.t line 5.
t/30-render.t .................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/31-call-template.t line 5.
BEGIN failed--compilation aborted at t/31-call-template.t line 5.
t/31-call-template.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at t/40-package-template.t line 5.
BEGIN failed--compilation aborted at t/40-package-template.t line 5.
t/40-package-template.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test 'exec cpppp'
# at t/90-cpppp-cli.t line 27.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: basic_output'
# at t/90-cpppp-cli.t line 33.
# Caught exception in subtest: Can't open '/tmp/xHy1sEEFVS/out.c' for reading: 'No such file or directory' at t/90-cpppp-cli.t line 15
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test at t/90-cpppp-cli.t line 37.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: split_output'
# at t/90-cpppp-cli.t line 45.
# Caught exception in subtest: Can't open '/tmp/xHy1sEEFVS/out.h' for reading: 'No such file or directory' at t/90-cpppp-cli.t line 15
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test at t/90-cpppp-cli.t line 56.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'out.c'
# at t/90-cpppp-cli.t line 63.
# +---------------------------+----+---------------------------+
# | GOT | OP | CHECK |
# +---------------------------+----+---------------------------+
# | Line 1\n | eq | Line 1\n |
# | Line 2\n | | Line 2\n |
# | // BEGIN GENERATED_TEXT\n | | // BEGIN GENERATED_TEXT\n |
# | // END GENERATED_TEXT\n | | Injected line 1\n |
# | Line 5\n | | Injected line 2\n |
# | | | // END GENERATED_TEXT\n |
# | | | Line 5\n |
# +---------------------------+----+---------------------------+
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test at t/90-cpppp-cli.t line 72.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: splice_output_into_file'
# at t/90-cpppp-cli.t line 80.
#
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test at t/90-cpppp-cli.t line 84.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: convert_comments'
# at t/90-cpppp-cli.t line 102.
#
# Caught exception in subtest: Can't open '/tmp/xHy1sEEFVS/out.c' for reading: 'No such file or directory' at t/90-cpppp-cli.t line 15
#
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test at t/90-cpppp-cli.t line 106.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: format_commandline'
# at t/90-cpppp-cli.t line 118.
#
# Caught exception in subtest: Can't open '/tmp/xHy1sEEFVS/out.c' for reading: 'No such file or directory' at t/90-cpppp-cli.t line 15
#
Variable length lookbehind not implemented in regex m/(?<=[;{)]\s{0,200})\n([ \t]+)[\w\$\@]/ at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib/CodeGen/Cpppp.pm line 380.
Compilation failed in require at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
BEGIN failed--compilation aborted at /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/bin/cpppp line 9.
# Failed test 'run_cpppp'
# at t/90-cpppp-cli.t line 132.
# +-------+----+-------+
# | GOT | OP | CHECK |
# +-------+----+-------+
# | 65280 | eq | 0 |
# +-------+----+-------+
# Failed test 'Subtest: re_exec'
# at t/90-cpppp-cli.t line 139.
#
# Caught exception in subtest: Can't open '/tmp/xHy1sEEFVS/out.c' for reading: 'No such file or directory' at t/90-cpppp-cli.t line 15
#
# Seeded srand with seed '20240713' from local date.
t/90-cpppp-cli.t ..............
Dubious, test returned 6 (wstat 1536, 0x600)
Failed 6/6 subtests
Test Summary Report
-------------------
t/10-parse-code-block.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/20-translate-cpppp.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/21-parameters.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/22-methods.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/23-output-sections.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/24-detect-indent-context.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/30-render.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/31-call-template.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/40-package-template.t (Wstat: 65280 (exited 255) Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/90-cpppp-cli.t (Wstat: 1536 (exited 6) Tests: 6 Failed: 6)
Failed tests: 1-6
Non-zero exit status: 6
Files=13, Tests=31, 1 wallclock secs ( 0.04 usr 0.01 sys + 1.35 cusr 0.16 csys = 1.56 CPU)
Result: FAIL
Failed 10/13 test programs. 6/31 subtests failed.
make: *** [Makefile:936: test_dynamic] Error 6
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.42 0
Cwd 3.75 0
Data::Dumper 2.167 0
Exporter 5.72 0
ExtUtils::MakeMaker 7.70 0
File::Copy 2.32 0
File::Temp 0.2311 0
FindBin 1.51 0
Getopt::Long 2.49 0
Hash::Util 0.22 0
List::Util 1.46_02 0
Scalar::Util 1.46_02 0
Test2::Suite 0.000163 0.000139
Test2::Tools::Subtest 0.000163 0
Test2::V0 0.000163 0
autodie 2.29 0
autouse 1.11 0
constant 1.33 0
experimental 0.016 0
lib 0.64 0
overload 1.28 0
parent 0.236 0
strict 1.11 0
version 0.9932 0
warnings 1.37 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9914
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280236
ExtUtils::Command 7.70
ExtUtils::Install 2.22
ExtUtils::MakeMaker 7.70
ExtUtils::Manifest 1.75
ExtUtils::ParseXS 3.51
File::Spec 3.75
Module::Build 0.4234
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302199
Test::Harness 3.48
Test::More 1.302199
version 0.9932
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/MK9tl_nqAp/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 2134494
PERL5_CPANPLUS_IS_VERSION = 0.9914
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.26.1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/MK9tl_nqAp
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/MK9tl_nqAp"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/MK9tl_nqAp
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.xterm-256color
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.26.1/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 26 subversion 1) configuration:
Platform:
osname=linux
osvers=5.4.0-26-generic
archname=x86_64-linux-ld
uname='linux uchder 5.4.0-26-generic #30-ubuntu smp mon apr 20 16:58:30 utc 2020 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.26.1 -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='9.3.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.31.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.31'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.90
Built under linux
Compiled at Apr 27 2020 16:16:46
%ENV:
PERL5LIB="/home/cpan/pit/jail/MK9tl_nqAp/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="2134494"
PERL5_CPANPLUS_IS_VERSION="0.9914"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.26.1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/MK9tl_nqAp"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/MK9tl_nqAp""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/MK9tl_nqAp"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/MK9tl_nqAp/lib/perl5/5.26.1/x86_64-linux-ld
/home/cpan/pit/jail/MK9tl_nqAp/lib/perl5/5.26.1
/home/cpan/pit/jail/MK9tl_nqAp/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/MK9tl_nqAp/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.26.1/.cpanplus/5.26.1/build/imLLD3gv3l/CodeGen-Cpppp-0.004/blib/arch
/home/cpan/pit/bare-ld/perl-5.26.1/lib/site_perl/5.26.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.26.1/lib/site_perl/5.26.1
/home/cpan/pit/bare-ld/perl-5.26.1/lib/5.26.1/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.26.1/lib/5.26.1