Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Apache-Test-1.37 v5.12.3 OpenBSD
Date: 2012-02-03T09:52:32Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear PHRED,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9113. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Feb 3 09:51:26 2012] cp lib/Apache/TestRun.pm blib/lib/Apache/TestRun.pm
cp lib/Apache/TestClient.pm blib/lib/Apache/TestClient.pm
cp lib/Apache/TestMM.pm blib/lib/Apache/TestMM.pm
cp lib/Apache/TestCommonPost.pm blib/lib/Apache/TestCommonPost.pm
cp lib/Apache/TestConfigParrot.pm blib/lib/Apache/TestConfigParrot.pm
cp lib/Apache/TestRunPHP.pm blib/lib/Apache/TestRunPHP.pm
cp lib/Apache/Test.pm blib/lib/Apache/Test.pm
cp lib/Apache/TestConfigC.pm blib/lib/Apache/TestConfigC.pm
cp lib/Apache/TestServer.pm blib/lib/Apache/TestServer.pm
cp lib/Apache/TestReportPerl.pm blib/lib/Apache/TestReportPerl.pm
cp lib/Apache/TestConfig.pm blib/lib/Apache/TestConfig.pm
cp lib/Apache/TestConfigPerl.pm blib/lib/Apache/TestConfigPerl.pm
cp lib/Apache/TestHarness.pm blib/lib/Apache/TestHarness.pm
cp lib/Apache/TestUtil.pm blib/lib/Apache/TestUtil.pm
cp lib/Apache/TestSmoke.pm blib/lib/Apache/TestSmoke.pm
cp lib/Apache/TestTrace.pm blib/lib/Apache/TestTrace.pm
cp lib/Apache/TestCommon.pm blib/lib/Apache/TestCommon.pm
cp lib/Apache/TestSmokePerl.pm blib/lib/Apache/TestSmokePerl.pm
cp lib/Apache/TestConfigParse.pm blib/lib/Apache/TestConfigParse.pm
cp lib/Apache/TestConfigPHP.pm blib/lib/Apache/TestConfigPHP.pm
cp lib/Apache/Test5005compat.pm blib/lib/Apache/Test5005compat.pm
cp lib/Apache/TestBuild.pm blib/lib/Apache/TestBuild.pm
cp lib/Apache/TestMB.pm blib/lib/Apache/TestMB.pm
cp lib/Apache/TestPerlDB.pm blib/lib/Apache/TestPerlDB.pm
cp lib/Apache/TestRequest.pm blib/lib/Apache/TestRequest.pm
cp lib/Apache/TestHandler.pm blib/lib/Apache/TestHandler.pm
cp lib/Apache/TestRunParrot.pm blib/lib/Apache/TestRunParrot.pm
cp lib/Bundle/ApacheTest.pm blib/lib/Bundle/ApacheTest.pm
cp lib/Apache/TestHarnessPHP.pm blib/lib/Apache/TestHarnessPHP.pm
cp lib/Apache/TestRunPerl.pm blib/lib/Apache/TestRunPerl.pm
cp lib/Apache/TestReport.pm blib/lib/Apache/TestReport.pm
cp lib/Apache/TestSSLCA.pm blib/lib/Apache/TestSSLCA.pm
cp lib/Apache/TestSort.pm blib/lib/Apache/TestSort.pm
Manifying blib/man3/Apache::TestRun.3
Manifying blib/man3/Apache::TestSmoke.3
Manifying blib/man3/Apache::TestRequest.3
Manifying blib/man3/Apache::TestServer.3
Manifying blib/man3/Apache::TestTrace.3
Manifying blib/man3/Apache::TestHandler.3
Manifying blib/man3/Apache::TestConfig.3
Manifying blib/man3/Apache::TestMM.3
Manifying blib/man3/Apache::TestRunPHP.3
Manifying blib/man3/Bundle::ApacheTest.3
Manifying blib/man3/Apache::Test.3
Manifying blib/man3/Apache::TestRunPerl.3
Manifying blib/man3/Apache::TestReport.3
Manifying blib/man3/Apache::TestMB.3
Manifying blib/man3/Apache::TestUtil.3
[ERROR] [Fri Feb 3 09:52:31 2012] MAKE TEST failed: /home/cpan/pit/thr/perl-5.12.3/bin/perl -Iblib/arch -Iblib/lib t/TEST -clean
APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT= APACHE_TEST_USER= APACHE_TEST_APXS= /home/cpan/pit/thr/perl-5.12.3/bin/perl -Iblib/arch -Iblib/lib t/TEST -bugreport -verbose=0
/usr/sbin/httpd -d /home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/t -f /home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/t/conf/httpd.conf -D APACHE1 -D PERL_USEITHREADS
using Apache/1.3.29
waiting 60 seconds for server to start: .
waiting 60 seconds for server to start: ok (waited 0 secs)
server localhost:8529 started
still waiting for server to warm up: ...........................................................
the server is down, giving up after 61 secs
[ error] failed to start server! (please examine t/logs/error_log)
+-----------------------------------------------------+
| To report problems please refer to the SUPPORT file |
+-----------------------------------------------------+
*** Error code 1
Stop in /home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37 (line 964 of Makefile).
[MSG] [Fri Feb 3 09:52:31 2012] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Cwd 3.33 2.06
ExtUtils::MakeMaker 6.62 0
File::Spec 3.33 0.8
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9113
CPANPLUS::Dist::Build 0.60
Cwd 3.33
ExtUtils::CBuilder 0.280202
ExtUtils::Command 1.16
ExtUtils::Install 1.55
ExtUtils::MakeMaker 6.62
ExtUtils::Manifest 1.60
ExtUtils::ParseXS 3.07
File::Spec 3.33
Module::Build 0.3800
Test::Harness 3.23
Test::More 0.98
version 0.95
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.66.
Powered by minismokebox version 0.54
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB = :/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 6534
PERL5_CPANPLUS_IS_VERSION = 0.9113
PERL5_MINISMOKEBOX = 0.54
PERL5_YACSMOKE_BASE = /home/cpan/pit/thr/conf/perl-5.12.3
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/thr/perl-5.12.3/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 12 subversion 3) configuration:
Platform:
osname=openbsd, osvers=5.0, archname=OpenBSD.i386-openbsd-thread-multi
uname='openbsd oatcake.bingosnet.co.uk 5.0 generic#43 i386 '
config_args='-des -Dprefix=/home/cpan/pit/thr/perl-5.12.3 -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd5.0'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.60.1, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY MYMALLOC PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_ITHREADS
USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF
USE_REENTRANT_API
Built under openbsd
Compiled at Dec 2 2011 03:13:19
%ENV:
PERL5LIB=":/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/lib:/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="6534"
PERL5_CPANPLUS_IS_VERSION="0.9113"
PERL5_MINISMOKEBOX="0.54"
PERL5_YACSMOKE_BASE="/home/cpan/pit/thr/conf/perl-5.12.3"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/lib
/home/cpan/pit/thr/conf/perl-5.12.3/.cpanplus/5.12.3/build/Apache-Test-1.37/blib/arch
/home/cpan/pit/thr/perl-5.12.3/lib/site_perl/5.12.3/OpenBSD.i386-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.12.3/lib/site_perl/5.12.3
/home/cpan/pit/thr/perl-5.12.3/lib/5.12.3/OpenBSD.i386-openbsd-thread-multi
/home/cpan/pit/thr/perl-5.12.3/lib/5.12.3
.