Log-Log4perl-Shortcuts v0.018 Perl 5 v5.22.4 x86_64-linux-thread-multi
- Status
- Fail
- From
- Nigel Horne
- Dist
-
Log-Log4perl-Shortcuts v0.018
- Platform
- Perl 5 v5.22.4 x86_64-linux-thread-multi
- Date
- 2018-09-15 11:45:10
- ID
- ccfbb96c-b8dc-11e8-b1f0-ccb36b6a1a04
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Steve Dondley,
This is a computer-generated report for Log-Log4perl-Shortcuts-0.018
on perl 5.22.4, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
Skip blib/lib/auto/share/dist/Log-Log4perl-Shortcuts/log_config/default.cfg (unchanged)
PERL_DL_NONLAZY=1 "/home/njh/perl5/perlbrew/perls/perl-5.22.4/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use Log::Log4perl::Shortcuts;'
# at t/00-use_ok.t line 5.
# Tried to use 'Log::Log4perl::Shortcuts'.
# Error: Can't locate Module/Data.pm in @INC (you may need to install the Module::Data module) (@INC contains: /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4 /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4 .) at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
# BEGIN failed--compilation aborted at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
# Compilation failed in require at t/00-use_ok.t line 5.
# BEGIN failed--compilation aborted at t/00-use_ok.t line 5.
# Looks like you failed 1 test of 1.
t/00-use_ok.t ............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Can't locate Module/Data.pm in @INC (you may need to install the Module::Data module) (@INC contains: /tmp/user/1000/testwrapper.1693/Yegu2R7jnJ /tmp/user/1000/testwrapper.1693/RZahgsuBp7 /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4 /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4 .) at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
BEGIN failed--compilation aborted at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
Compilation failed in require at t/01-export_ok.t line 24.
BEGIN failed--compilation aborted at t/01-export_ok.t line 24.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 1.
t/01-export_ok.t .........
Dubious, test returned 2 (wstat 512, 0x200)
All 1 subtests passed
Can't locate Module/Data.pm in @INC (you may need to install the Module::Data module) (@INC contains: /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4 /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4 .) at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
BEGIN failed--compilation aborted at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
Compilation failed in require at t/02-output_ok.t line 58.
BEGIN failed--compilation aborted at t/02-output_ok.t line 58.
t/02-output_ok.t .........
Dubious, test returned 2 (wstat 512, 0x200)
No subtests run
Can't locate Module/Data.pm in @INC (you may need to install the Module::Data module) (@INC contains: /tmp/user/1000/testwrapper.1693/S9TppvW5Re /tmp/user/1000/testwrapper.1693/fb25Eb75TL /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4 /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi /home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4 .) at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
BEGIN failed--compilation aborted at /home/njh/.cpan/build/Log-Log4perl-Shortcuts-0.018-9/blib/lib/Log/Log4perl/Shortcuts.pm line 8.
Compilation failed in require at t/03-set_log_config.t line 9.
BEGIN failed--compilation aborted at t/03-set_log_config.t line 9.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 2 just after 1.
t/03-set_log_config.t ....
Dubious, test returned 2 (wstat 512, 0x200)
All 1 subtests passed
Path::Tiny version 0.108 required--this is only version 0.104 at t/04-change_log_level.t line 9.
BEGIN failed--compilation aborted at t/04-change_log_level.t line 9.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 1.
t/04-change_log_level.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
All 1 subtests passed
Path::Tiny version 0.108 required--this is only version 0.104 at t/05-get_log_level.t line 9.
BEGIN failed--compilation aborted at t/05-get_log_level.t line 9.
# Tests were run but no plan was declared and done_testing() was not seen.
# Looks like your test exited with 255 just after 1.
t/05-get_log_level.t .....
Dubious, test returned 255 (wstat 65280, 0xff00)
All 1 subtests passed
Test Summary Report
-------------------
t/00-use_ok.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/01-export_ok.t (Wstat: 512 Tests: 1 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/02-output_ok.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/03-set_log_config.t (Wstat: 512 Tests: 1 Failed: 0)
Non-zero exit status: 2
Parse errors: No plan found in TAP output
t/04-change_log_level.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05-get_log_level.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
Files=6, Tests=5, 1 wallclock secs ( 0.02 usr 0.01 sys + 0.58 cusr 0.06 csys = 0.67 CPU)
Result: FAIL
Failed 6/6 test programs. 1/5 subtests failed.
make: *** [Makefile:858: test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
build_requires:
Module Need Have
---------------------------- ---- --------
ExtUtils::MakeMaker 0 7.34
File::Copy 0 2.30
File::Temp 0 0.2308
File::UserConfig 0 0.06
Path::Tiny 0 0.104
Test::File::ShareDir::Dist 0 1.001002
Test::File::ShareDir::Module 0 1.001002
configure_requires:
Module Need Have
---------------------------- ---- --------
ExtUtils::MakeMaker 0 7.34
File::ShareDir::Install 0.06 0.13
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
HARNESS_OPTIONS = j4
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.22.4/bin:/home/njh/src/njh/smoker/bin:/usr/bin:/bin
PERL5LIB = /home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch:/home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1710
PERL5_CPAN_IS_RUNNING = 1710
PERLBREW_HOME = /home/njh/.perlbrew
PERLBREW_MANPATH = /home/njh/perl5/perlbrew/perls/perl-5.22.4/man
PERLBREW_PATH = /home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.22.4/bin
PERLBREW_PERL = perl-5.22.4
PERLBREW_ROOT = /home/njh/perl5/perlbrew
PERLBREW_SHELLRC_VERSION = 0.82
PERLBREW_VERSION = 0.82
SHELL = /bin/sh
TEMP = /tmp/user/1000
TMPDIR = /tmp/user/1000/testwrapper.1693
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/njh/perl5/perlbrew/perls/perl-5.22.4/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 24 25 29 30 44 46 108 112 1000
$EGID = 1000 4 24 25 29 30 44 46 108 112 1000
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.150010
Cwd 3.74
ExtUtils::CBuilder 0.280230
ExtUtils::Command 7.34
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.71
ExtUtils::ParseXS 3.35
File::Spec 3.74
JSON 2.97001
JSON::PP 2.97001
Module::Build 0.4224
Module::Signature n/a
Parse::CPAN::Meta 2.150010
Test::Harness 3.35_01
Test::More 1.302136
YAML 1.26
YAML::Syck 1.30
version 0.9909
--
Summary of my perl5 (revision 5 version 22 subversion 4) configuration:
Platform:
osname=linux, osvers=4.11.0-1-amd64, archname=x86_64-linux-thread-multi
uname='linux gateway 4.11.0-1-amd64 #1 smp debian 4.11.6-1 (2017-06-19) x86_64 gnulinux '
config_args='-de -Dprefix=/home/njh/perl5/perlbrew/perls/perl-5.22.4 -Duseithreads -Dusemultiplicity -Dusedevel -Accflags= -Aeval:scriptdir=/home/njh/perl5/perlbrew/perls/perl-5.22.4/bin'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion='', gccversion='6.4.0 20170704', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16, longdblkind=3
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/6/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc -lgdbm_compat
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.24.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.24'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_DEVEL USE_64_BIT_ALL USE_64_BIT_INT
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Jul 19 2017 00:39:05
%ENV:
PERL5LIB="/home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch:/home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="1710"
PERL5_CPAN_IS_RUNNING="1710"
PERLBREW_HOME="/home/njh/.perlbrew"
PERLBREW_MANPATH="/home/njh/perl5/perlbrew/perls/perl-5.22.4/man"
PERLBREW_PATH="/home/njh/perl5/perlbrew/bin:/home/njh/perl5/perlbrew/perls/perl-5.22.4/bin"
PERLBREW_PERL="perl-5.22.4"
PERLBREW_ROOT="/home/njh/perl5/perlbrew"
PERLBREW_SHELLRC_VERSION="0.82"
PERLBREW_VERSION="0.82"
@INC:
/home/njh/.cpan/build/File-UserConfig-0.06-47/blib/arch
/home/njh/.cpan/build/File-UserConfig-0.06-47/blib/lib
/home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4/x86_64-linux-thread-multi
/home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/site_perl/5.22.4
/home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4/x86_64-linux-thread-multi
/home/njh/perl5/perlbrew/perls/perl-5.22.4/lib/5.22.4
.