Back
From: metabase:user:00e8548a-0e72-11e3-8ee3-df0a9c418065
Subject: NA Device-WebIO-0.010 v5.10.1 GNU/Linux
Date: 2015-04-11T01:26:40Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Timm Murray,
This is a computer-generated report for Device-WebIO-0.010
on perl 5.10.1, created by CPAN-Reporter-1.2014.
Thank you for uploading your work to CPAN. While attempting to build or test
this distribution, the distribution signaled that support is not available
either for this operating system or this version of Perl. Nevertheless, any
diagnostic output produced is provided below for reference. If this is not
what you expect, you may wish to consult the CPAN Testers Wiki:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
Perl v5.12.0 required--this is only v5.10.1, stopped at t/001_load.t line 25.
BEGIN failed--compilation aborted at t/001_load.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/001_load.t ....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 14/14 subtests
t/002_pod.t ..................... ok
Perl v5.12.0 required--this is only v5.10.1, stopped at t/010_digital_input.t line 25.
BEGIN failed--compilation aborted at t/010_digital_input.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/010_digital_input.t ...........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/020_digital_output.t line 25.
BEGIN failed--compilation aborted at t/020_digital_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/020_digital_output.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/030_adc_input.t line 25.
BEGIN failed--compilation aborted at t/030_adc_input.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/030_adc_input.t ...............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 20/20 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/040_pwm_output.t line 25.
BEGIN failed--compilation aborted at t/040_pwm_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/040_pwm_output.t ..............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/060_video_output.t line 25.
BEGIN failed--compilation aborted at t/060_video_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/060_video_output.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 13/13 subtests
Perl v5.14.0 required--this is only v5.10.1, stopped at t/070_description.t line 25.
BEGIN failed--compilation aborted at t/070_description.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/070_description.t .............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/080_still_image_output.t line 25.
BEGIN failed--compilation aborted at t/080_still_image_output.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/080_still_image_output.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/9 subtests
Perl v5.14.0 required--this is only v5.10.1, stopped at t/090_i2c.t line 25.
BEGIN failed--compilation aborted at t/090_i2c.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/090_i2c.t .....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/2 subtests
Perl v5.14.0 required--this is only v5.10.1, stopped at t/100_temp_sensors.t line 25.
BEGIN failed--compilation aborted at t/100_temp_sensors.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/100_temp_sensors.t ............
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/6 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/110_digital_input_callback.t line 25.
BEGIN failed--compilation aborted at t/110_digital_input_callback.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/110_digital_input_callback.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/16 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/120_video_output_callback.t line 25.
BEGIN failed--compilation aborted at t/120_video_output_callback.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/120_video_output_callback.t ...
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/5 subtests
Perl v5.14.0 required--this is only v5.10.1, stopped at t/130_spi.t line 25.
BEGIN failed--compilation aborted at t/130_spi.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/130_spi.t .....................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
Perl v5.12.0 required--this is only v5.10.1, stopped at t/200_two_types_one_obj.t line 25.
BEGIN failed--compilation aborted at t/200_two_types_one_obj.t line 25.
# Looks like your test exited with 255 before it could output anything.
t/200_two_types_one_obj.t .......
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 14 tests but ran 0.
t/010_digital_input.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
t/020_digital_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/030_adc_input.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/040_pwm_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/060_video_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 13 tests but ran 0.
t/070_description.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/080_still_image_output.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 9 tests but ran 0.
t/090_i2c.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 2 tests but ran 0.
t/100_temp_sensors.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 0.
t/110_digital_input_callback.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 16 tests but ran 0.
t/120_video_output_callback.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 5 tests but ran 0.
t/130_spi.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/200_two_types_one_obj.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
Files=15, Tests=17, 1 wallclock secs ( 0.04 usr 0.03 sys + 0.24 cusr 0.05 csys = 0.36 CPU)
Result: FAIL
Failed 14/15 test programs. 0/17 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- --------
Exception::Tiny 0 0.2.1
Moo 0 2.000001
namespace::clean 0 0.25
build_requires:
Module Need Have
------------------- ---- --------
ExtUtils::MakeMaker 0 7.04
Test::Pod 0 1.48
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
PATH = /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
PERL5LIB = /root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/arch:/root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/lib:/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/arch:/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/lib:/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/arch:/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/lib:/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/arch:/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 12144
PERL5_CPAN_IS_RUNNING = 12144
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 25592,12144
PERL_CR_SMOKER_CURRENT = Device-WebIO-RaspberryPi-0.009
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/bin/perl
$UID/$EUID = 0 / 0
$GID = 0 0
$EGID = 0 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.10
CPAN::Meta 2.150001
Cwd 3.47
ExtUtils::CBuilder 0.280220
ExtUtils::Command 1.20
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.04
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.47
JSON 2.61
JSON::PP 2.27300
Module::Build 0.4211
Module::Signature n/a
Parse::CPAN::Meta 1.4414
Test::Harness 3.35
Test::More 1.001014
YAML 1.14
YAML::Syck 1.29
version 0.9912
--
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.32-220.el6.x86_64, archname=x86_64-linux-thread-multi
uname='linux c6b8.bsys.dev.centos.org 2.6.32-220.el6.x86_64 #1 smp tue dec 6 19:48:22 gmt 2011 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Doptimize=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -DDEBUGGING=-g -Dversion=5.10.1 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl5 -Dsitearch=/usr/local/lib64/perl5 -Dprivlib=/usr/share/perl5 -Darchlib=/usr/lib64/perl5 -Dvendorlib=/usr/share/perl5/vendor_perl -Dvendorarch=/usr/lib64/perl5/vendor_perl -Dinc_version_list=5.10.0 -Darchname=x86_64-linux-thread-multi -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_sethostent_r_proto -Ud_endprotoent_r_proto -Ud_setprotoent_r_proto -Ud_endservent_r_proto -Ud_setservent_r_proto -Dscriptdir=/usr/bin -Dusesitecustomize'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.7 20120313 (Red Hat 4.4.7-11)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector'
libpth=/usr/local/lib64 /lib64 /usr/lib64
libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.12'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib64/perl5/CORE'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
USE_PERLIO USE_REENTRANT_API USE_SITECUSTOMIZE
Built under linux
Compiled at Nov 12 2014 09:09:35
%ENV:
PERL5LIB="/root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/arch:/root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/lib:/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/arch:/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/lib:/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/arch:/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/lib:/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/arch:/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/lib"
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="12144"
PERL5_CPAN_IS_RUNNING="12144"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="25592,12144"
PERL_CR_SMOKER_CURRENT="Device-WebIO-RaspberryPi-0.009"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/arch
/root/.cpan/build/Exception-Tiny-v0.2.1-MiA3AY/blib/lib
/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/arch
/root/.cpan/build/Class-Accessor-Lite-0.06-bEvJzt/blib/lib
/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/arch
/root/.cpan/build/Devel-CheckLib-1.03-6oO8mz/blib/lib
/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/arch
/root/.cpan/build/AnyEvent-7.08-QQDPNU/blib/lib
/usr/local/lib64/perl5
/usr/local/share/perl5
/usr/lib64/perl5/vendor_perl
/usr/share/perl5/vendor_perl
/usr/lib64/perl5
/usr/share/perl5
.