Plack-Middleware-ServerStatus-Lite v0.36 Perl 5 v5.26.0 x86_64-linux-ld
- Status
- Pass
- From
- Chris Williams (BINGOS)
- Dist
-
Plack-Middleware-ServerStatus-Lite v0.36
- Platform
- Perl 5 v5.26.0 x86_64-linux-ld
- Date
- 2019-09-27 06:27:03
- ID
- d1c0b902-e0ef-11e9-9066-e374b0ba08e8
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Masahiro Nagano,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9178. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. Congratulations!
All tests were successful.
TEST RESULTS:
Below is the error stack from stage 'make test':
t/00_compile.t .............. ok
t/01_builder.t .............. ok
using Starman for test at t/02_server.t line 29.
2019/09/27-07:26:45 Starman::Server (type Net::Server::PreFork) starting! pid(3051)
Resolved [localhost]:46383 to [127.0.0.1]:46383, IPv4
Resolved [localhost]:46383 to [127.0.0.1]:46383, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:46383 with IPv4) - skipping
Binding to TCP port 46383 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:48 Server closing!
t/02_server.t ............... ok
using Starman for test at t/03_server_delayed_res.t line 29.
2019/09/27-07:26:48 Starman::Server (type Net::Server::PreFork) starting! pid(3061)
Resolved [localhost]:38961 to [127.0.0.1]:38961, IPv4
Resolved [localhost]:38961 to [127.0.0.1]:38961, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:38961 with IPv4) - skipping
Binding to TCP port 38961 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:51 Server closing!
using Starman for test at t/03_server_delayed_res.t line 89.
2019/09/27-07:26:51 Starman::Server (type Net::Server::PreFork) starting! pid(3070)
Resolved [localhost]:44285 to [127.0.0.1]:44285, IPv4
Resolved [localhost]:44285 to [127.0.0.1]:44285, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:44285 with IPv4) - skipping
Binding to TCP port 44285 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:54 Server closing!
t/03_server_delayed_res.t ... ok
using Starman for test at t/04_json.t line 31.
2019/09/27-07:26:54 Starman::Server (type Net::Server::PreFork) starting! pid(3080)
Resolved [localhost]:45949 to [127.0.0.1]:45949, IPv4
Resolved [localhost]:45949 to [127.0.0.1]:45949, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:45949 with IPv4) - skipping
Binding to TCP port 45949 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:57 Server closing!
t/04_json.t ................. ok
using Starman for test at t/05_counter.t line 31.
2019/09/27-07:26:57 Starman::Server (type Net::Server::PreFork) starting! pid(3090)
Resolved [localhost]:46537 to [127.0.0.1]:46537, IPv4
Resolved [localhost]:46537 to [127.0.0.1]:46537, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:46537 with IPv4) - skipping
Binding to TCP port 46537 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:57 Server closing!
t/05_counter.t .............. ok
using Starman for test at t/06_counter_delayed_res.t line 33.
2019/09/27-07:26:58 Starman::Server (type Net::Server::PreFork) starting! pid(3099)
Resolved [localhost]:32847 to [127.0.0.1]:32847, IPv4
Resolved [localhost]:32847 to [127.0.0.1]:32847, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:32847 with IPv4) - skipping
Binding to TCP port 32847 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:58 Server closing!
using Starman for test at t/06_counter_delayed_res.t line 95.
2019/09/27-07:26:58 Starman::Server (type Net::Server::PreFork) starting! pid(3107)
Resolved [localhost]:40673 to [127.0.0.1]:40673, IPv4
Resolved [localhost]:40673 to [127.0.0.1]:40673, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:40673 with IPv4) - skipping
Binding to TCP port 40673 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:58 Server closing!
t/06_counter_delayed_res.t .. ok
using Starman for test at t/07_skip_ps.t line 29.
2019/09/27-07:26:58 Starman::Server (type Net::Server::PreFork) starting! pid(3116)
Resolved [localhost]:39867 to [127.0.0.1]:39867, IPv4
Resolved [localhost]:39867 to [127.0.0.1]:39867, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:39867 with IPv4) - skipping
Binding to TCP port 39867 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:26:59 Server closing!
t/07_skip_ps.t .............. ok
2019/09/27-07:26:59 Starman::Server (type Net::Server::PreFork) starting! pid(3123)
Resolved [localhost]:33935 to [127.0.0.1]:33935, IPv4
Resolved [localhost]:33935 to [127.0.0.1]:33935, IPv4
Duplicate configuration (TCP) on [127.0.0.1]:33935 with IPv4) - skipping
Binding to TCP port 33935 on host 127.0.0.1 with IPv4
Setting gid to "1001 1001 1001"
2019/09/27-07:27:02 Server closing!
t/08_command.t .............. ok
All tests successful.
Files=9, Tests=86, 18 wallclock secs ( 0.04 usr 0.00 sys + 1.37 cusr 0.36 csys = 1.77 CPU)
Result: PASS
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
B 1.68 0
Capture::Tiny 0.48 0
Getopt::Long 2.49 2.38
JSON 4.02 2.53
LWP::UserAgent 6.39 0
Net::CIDR::Lite 0.21 0
Parallel::Scoreboard 0.08 0.03
Plack::Middleware 0 0
Pod::Usage 1.69 0
Starman 0.4015 0.3013
Test::More 1.302168 0
Test::SharedFork 0.35 0
Test::TCP 2.20 2.00
Try::Tiny 0.30 0.09
parent 0.236 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9178
CPANPLUS::Dist::Build 0.90
Cwd 3.75
ExtUtils::CBuilder 0.280231
ExtUtils::Command 7.38
ExtUtils::Install 2.14
ExtUtils::MakeMaker 7.38
ExtUtils::Manifest 1.72
ExtUtils::ParseXS 3.35
File::Spec 3.75
Module::Build 0.4229
Pod::Parser 1.63
Pod::Simple 3.35
Test2 1.302168
Test::Harness 3.42
Test::More 1.302168
version 0.9924
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 1.08.
Powered by minismokebox version 0.68
CPANPLUS is prefering Build.PL
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
LANGUAGE = en_GB:en
NONINTERACTIVE_TESTING = 1
PATH = /home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/script:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/script:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
PERL5LIB = /home/cpan/pit/jail/JWDbbL9KDz/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/arch:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 21744
PERL5_CPANPLUS_IS_VERSION = 0.9178
PERL5_MINISMOKEBOX = 0.68
PERL5_YACSMOKE_BASE = /home/cpan/pit/bare-ld/conf/perl-5.26.0
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_LOCAL_LIB_ROOT = /home/cpan/pit/jail/JWDbbL9KDz
PERL_MB_OPT = --install_base "/home/cpan/pit/jail/JWDbbL9KDz"
PERL_MM_OPT = INSTALL_BASE=/home/cpan/pit/jail/JWDbbL9KDz
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/pit/bare-ld/perl-5.26.0/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1001 1001
EGID: $) = 1001 1001
-------------------------------
--
Summary of my perl5 (revision 5 version 26 subversion 0) configuration:
Platform:
osname=linux
osvers=4.15.0-58-generic
archname=x86_64-linux-ld
uname='linux uchder 4.15.0-58-generic #64-ubuntu smp tue aug 6 11:12:41 utc 2019 x86_64 x86_64 x86_64 gnulinux '
config_args='-des -Dprefix=/home/cpan/pit/bare-ld/perl-5.26.0 -Duselongdouble'
hint=recommended
useposix=true
d_sigaction=define
useithreads=undef
usemultiplicity=undef
use64bitint=define
use64bitall=define
uselongdouble=define
usemymalloc=n
default_inc_excludes_dot=define
bincompat5005=undef
Compiler:
cc='cc'
ccflags ='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
optimize='-O2'
cppflags='-fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include'
ccversion=''
gccversion='7.4.0'
gccosandvers=''
intsize=4
longsize=8
ptrsize=8
doublesize=8
byteorder=12345678
doublekind=3
d_longlong=define
longlongsize=8
d_longdbl=define
longdblsize=16
longdblkind=3
ivtype='long'
ivsize=8
nvtype='long double'
nvsize=16
Off_t='off_t'
lseeksize=8
alignbytes=16
prototype=define
Linker and Libraries:
ld='cc'
ldflags =' -fstack-protector-strong -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib/gcc/x86_64-linux-gnu/7/include-fixed /usr/include/x86_64-linux-gnu /usr/lib /lib/x86_64-linux-gnu /lib/../lib /usr/lib/x86_64-linux-gnu /usr/lib/../lib /lib
libs=-lpthread -lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.27.so
so=so
useshrplib=false
libperl=libperl.a
gnulibc_version='2.27'
Dynamic Linking:
dlsrc=dl_dlopen.xs
dlext=so
d_dlsymun=undef
ccdlflags='-Wl,-E'
cccdlflags='-fPIC'
lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector-strong'
Characteristics of this binary (from libperl):
Compile-time options:
HAS_TIMES
PERLIO_LAYERS
PERL_COPY_ON_WRITE
PERL_DONT_CREATE_GVSV
PERL_MALLOC_WRAP
PERL_OP_PARENT
PERL_PRESERVE_IVUV
USE_64_BIT_ALL
USE_64_BIT_INT
USE_LARGE_FILES
USE_LOCALE
USE_LOCALE_COLLATE
USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC
USE_LOCALE_TIME
USE_LONG_DOUBLE
USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.64
Built under linux
Compiled at Aug 13 2019 20:20:12
%ENV:
PERL5LIB="/home/cpan/pit/jail/JWDbbL9KDz/lib/perl5:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/arch:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib:/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="21744"
PERL5_CPANPLUS_IS_VERSION="0.9178"
PERL5_MINISMOKEBOX="0.68"
PERL5_YACSMOKE_BASE="/home/cpan/pit/bare-ld/conf/perl-5.26.0"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_LOCAL_LIB_ROOT="/home/cpan/pit/jail/JWDbbL9KDz"
PERL_MB_OPT="--install_base "/home/cpan/pit/jail/JWDbbL9KDz""
PERL_MM_OPT="INSTALL_BASE=/home/cpan/pit/jail/JWDbbL9KDz"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/cpan/pit/jail/JWDbbL9KDz/lib/perl5/5.26.0/x86_64-linux-ld
/home/cpan/pit/jail/JWDbbL9KDz/lib/perl5/5.26.0
/home/cpan/pit/jail/JWDbbL9KDz/lib/perl5/x86_64-linux-ld
/home/cpan/pit/jail/JWDbbL9KDz/lib/perl5
/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/a874cqmeQM/Starman-0.4015/blib/arch
/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/lib
/home/cpan/pit/bare-ld/conf/perl-5.26.0/.cpanplus/5.26.0/build/UYGh8q5EDz/Plack-Middleware-ServerStatus-Lite-0.36/blib/arch
/home/cpan/pit/bare-ld/perl-5.26.0/lib/site_perl/5.26.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.26.0/lib/site_perl/5.26.0
/home/cpan/pit/bare-ld/perl-5.26.0/lib/5.26.0/x86_64-linux-ld
/home/cpan/pit/bare-ld/perl-5.26.0/lib/5.26.0