Back
From: metabase:user:30f0bd62-2aae-11df-837a-5e0a49663a4f
Subject: FAIL Tie-Handle-HTTP-0.02 v5.15.0 OpenBSD
Date: 2011-08-04T10:23:43Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Jonathan Steinert,
This is a computer-generated report for Tie-Handle-HTTP-0.02
on perl 5.15.0, created by CPAN-Reporter-1.1902.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/sts/cpansmoke/perl-5.15.0/bin/perl5.15.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-Tie-Handle-HTTP.t .. ok
t/09-file.t ............. ok
# Failed test 'Tie succeeded'
# at t/10-all.t line 38.
# Failed test 'not at end of file yet'
# at t/10-all.t line 39.
tell() on unopened filehandle FOO at t/Common.perl line 8.
# Failed test 'Start at 0'
# at t/Common.perl line 8.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 9.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 11.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
seek() on unopened filehandle FOO at t/Common.perl line 13.
# Failed test 'Seek success'
# at t/Common.perl line 13.
tell() on unopened filehandle FOO at t/Common.perl line 14.
# Failed test 'Seek to 0'
# at t/Common.perl line 14.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 26 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 16.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 30 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 18.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 88 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Failed test 'Not at end of file, good'
# at t/Common.perl line 20.
seek() on unopened filehandle FOO at t/Common.perl line 23.
# Failed test 'Seek success'
# at t/Common.perl line 23.
tell() on unopened filehandle FOO at t/Common.perl line 31.
read() on unopened filehandle FOO at t/Common.perl line 36.
# Failed test 'Read success'
# at t/Common.perl line 40.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 41.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 41.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 42.
seek() on unopened filehandle FOO at t/Common.perl line 45.
# Failed test 'Seek success'
# at t/Common.perl line 45.
tell() on unopened filehandle FOO at t/Common.perl line 47.
read() on unopened filehandle FOO at t/Common.perl line 52.
# Failed test 'Read success'
# at t/Common.perl line 56.
Use of uninitialized value $bytes in numeric eq (==) at t/Common.perl line 57.
# Failed test 'Read of 82 succeeded'
# at t/Common.perl line 57.
# Failed test 'Read of string succeeded'
# at t/Common.perl line 58.
# Looks like you failed 53 tests of 61.
t/10-all.t ..............
Dubious, test returned 53 (wstat 13568, 0x3500)
Failed 53/61 subtests
Test Summary Report
-------------------
t/10-all.t (Wstat: 13568 Tests: 61 Failed: 53)
Failed tests: 1-8, 10-17, 19-27, 29-36, 38-45, 47-55
57-59
Non-zero exit status: 53
Files=3, Tests=123, 76 wallclock secs ( 0.14 usr 0.03 sys + 0.62 cusr 0.14 csys = 0.93 CPU)
Result: FAIL
Failed 1/3 test programs. 53/123 subtests failed.
*** Error code 53
Stop in /home/sts/cpansmoke/perl-5.15.0/cpan/build/Tie-Handle-HTTP-0.02-2SvVmE (line 778 of Makefile).
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- -------
Errno 0 1.13
HTTP::Daemon 0 6.00
HTTP::Request 0 6.00
HTTP::Response 0 6.01
HTTP::Status 0 6.00
LWP::UserAgent 0 6.02
Symbol 0 1.07
Test::More 0 0.98
build_requires:
Module Need Have
------------------- ---- -------
ExtUtils::MakeMaker 0 6.57_05
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/sts/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 9183
PERL5_CPAN_IS_RUNNING = 9183
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 16455,9183
PERL_CR_SMOKER_CURRENT = Tie-Handle-HTTP-0.02
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/local/bin/bash
TERM = screen
TMPDIR = /home/sts/cpansmoke/tmp
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/sts/cpansmoke/perl-5.15.0/bin/perl5.15.0
$UID/$EUID = 1000 / 1000
$GID = 10 10 0
$EGID = 10 10 0
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 1.9600
Cwd 3.36
ExtUtils::CBuilder 0.280204
ExtUtils::Command 1.17
ExtUtils::Install 1.56
ExtUtils::MakeMaker 6.57_05
ExtUtils::Manifest 1.58
ExtUtils::ParseXS 2.2210
File::Spec 3.33
Module::Build 0.3800
Module::Signature n/a
Test::Harness 3.23
Test::More 0.98
YAML 0.73
YAML::Syck n/a
version 0.88
--
Summary of my perl5 (revision 5 version 15 subversion 0) configuration:
Platform:
osname=openbsd, osvers=4.9, archname=OpenBSD.i386-openbsd-thread-multi
uname='openbsd cpansmoke5 4.9 generic.mp#794 i386 '
config_args='-des -Dusedevel -Dusethreads -Dprefix=/home/sts/cpansmoke/perl-5.15.0'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 ', gccosandvers='openbsd4.9'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lgdbm -lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.58.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: MULTIPLICITY MYMALLOC PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV PERL_USE_DEVEL USE_ITHREADS
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under openbsd
Compiled at Jun 29 2011 14:19:35
%ENV:
PERL5LIB=""
PERL5OPT=""
PERL5_CPANPLUS_IS_RUNNING="9183"
PERL5_CPAN_IS_RUNNING="9183"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="16455,9183"
PERL_CR_SMOKER_CURRENT="Tie-Handle-HTTP-0.02"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/home/sts/cpansmoke/perl-5.15.0/lib/site_perl/5.15.0/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.15.0/lib/site_perl/5.15.0
/home/sts/cpansmoke/perl-5.15.0/lib/5.15.0/OpenBSD.i386-openbsd-thread-multi
/home/sts/cpansmoke/perl-5.15.0/lib/5.15.0
.