Inline-C v0.79_001 Perl 5 v5.16.3 MSWin32-x86-multi-thread
- Status
- Fail
- From
- Alexandr Ciornii (CHORNY)
- Dist
-
Inline-C v0.79_001
- Platform
- Perl 5 v5.16.3 MSWin32-x86-multi-thread
- Date
- 2019-01-22 12:13:19
- ID
- d4f02fd2-6bf5-1014-9622-a4c4addfd600
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear Tina Muller,
This is a computer-generated report for Inline-C-0.79_001
on perl 5.16.3, created by CPAN-Reporter-1.2018.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://wiki.cpantesters.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from 'C:\strawberry163\c\bin\dmake.exe test':
Skip blib\lib\auto\share\dist\Inline-C\inline-c.pgx (unchanged)
C:\strawberry163\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t
t/000-require-modules.t ................ ok
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_01syntax.1560
(And if that works, please file a bug report.)
at t/01syntax.t line 15.
BEGIN failed--compilation aborted at t/01syntax.t line 24.
t/01syntax.t ...........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_02config.868
(And if that works, please file a bug report.)
at t/02config.t line 11.
BEGIN failed--compilation aborted at t/02config.t line 11.
t/02config.t ...........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_03typemap.1248
(And if that works, please file a bug report.)
at t/03typemap.t line 0.
INIT failed--call queue aborted.
t/03typemap.t ..........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_04perlapi.220
(And if that works, please file a bug report.)
at t/04perlapi.t line 0.
INIT failed--call queue aborted.
t/04perlapi.t ..........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_05xsmode.972
(And if that works, please file a bug report.)
at t/05xsmode.t line 0.
INIT failed--call queue aborted.
t/05xsmode.t ...........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_06parseregexp.1080
(And if that works, please file a bug report.)
at t/06parseregexp.t line 9.
BEGIN failed--compilation aborted at t/06parseregexp.t line 29.
t/06parseregexp.t ......................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_07typemap_multi.668
(And if that works, please file a bug report.)
at t/07typemap_multi.t line 23.
BEGIN failed--compilation aborted at t/07typemap_multi.t line 60.
t/07typemap_multi.t ....................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Insecure dependency in unlink while running with -T switch at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 763.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/08taint_1.p line 12.
Compilation failed in require at t/08taint.t line 41 (#1)
(F) You tried to do something that the tainting mechanism didn't like.
The tainting mechanism is turned on when you're running setuid or
setgid, or when you specify -T to turn it on explicitly. The
tainting mechanism labels all data that's derived directly or indirectly
from the user, who is considered to be unworthy of your trust. If any
such data is used in a "dangerous" operation, you get this error. See
perlsec for more information.
Uncaught exception from user code:
Insecure dependency in unlink while running with -T switch at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 763.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/08taint_1.p line 12.
Compilation failed in require at t/08taint.t line 41.
main::require_taint_1() called at t/08taint.t line 36
Test::Warn::warnings_like('CODE(0x9b7a4c)', 'ARRAY(0x3fa00c)', 'warn_test 1') called at t/08taint.t line 36
# Looks like you planned 10 tests but ran 1.
# Looks like your test exited with 255 just after 1.
t/08taint.t ............................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 9/10 subtests
This test could take a couple of minutes to run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
config file removed
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_09parser.1932
(And if that works, please file a bug report.)
at (eval 7) line 3.
BEGIN failed--compilation aborted at (eval 7) line 6.
main::code('main', 'foo_') called at t/09parser.t line 58
t/09parser.t ...........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
config file removed
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_10callback.1144
(And if that works, please file a bug report.)
at t/10callback.t line 21.
BEGIN failed--compilation aborted at t/10callback.t line 218.
t/10callback.t .........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_11default_readonly.1348
(And if that works, please file a bug report.)
at t/11default_readonly.t line 32.
Inline::check_config_file('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 254
Inline::glue('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 193
Inline::bind('Inline', 'C', ' int foo(SV * x) {\x{a} return (int)SvIV(x) * 2;\x{a} }\x{a}') called at t/11default_readonly.t line 32
main::function() called at t/11default_readonly.t line 18
t/11default_readonly.t .................
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_14void_arg.1000
(And if that works, please file a bug report.)
at t/14void_arg.t line 67.
Inline::check_config_file('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 254
Inline::glue('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 193
Inline::bind('Inline', 'C', '\x{a}void foo1(void) {\x{a} printf("Hello from foo1\n");\x{a}}\x{a}\x{a}int f...') called at t/14void_arg.t line 67
t/14void_arg.t .........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_14void_arg_PRD.1712
(And if that works, please file a bug report.)
at t/14void_arg_PRD.t line 69.
Inline::check_config_file('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 254
Inline::glue('Inline=HASH(0x3f9d5c)') called at C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/Inline.pm line 193
Inline::bind('Inline', 'C', '\x{a}void foo1(void) {\x{a} printf("Hello from foo1\n");\x{a}}\x{a}\x{a}int f...') called at t/14void_arg_PRD.t line 69
t/14void_arg_PRD.t .....................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_15ccflags.1272
(And if that works, please file a bug report.)
at t/15ccflags.t line 15.
BEGIN failed--compilation aborted at t/15ccflags.t line 21.
t/15ccflags.t ..........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_16ccflagsex.1520
(And if that works, please file a bug report.)
at t/16ccflagsex.t line 15.
BEGIN failed--compilation aborted at t/16ccflagsex.t line 21.
t/16ccflagsex.t ........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_17prehead.332
(And if that works, please file a bug report.)
at t/17prehead.t line 20.
BEGIN failed--compilation aborted at t/17prehead.t line 26.
t/17prehead.t ..........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/18quote_space.t ...................... ok
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_19INC.1548
(And if that works, please file a bug report.)
at t/19INC.t line 21.
BEGIN failed--compilation aborted at t/19INC.t line 30.
t/19INC.t ..............................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
$x: 43
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
$@ not as expected
t/20eval.t .............................
Failed 2/5 subtests
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_21read_DATA.292
(And if that works, please file a bug report.)
at t/21read_DATA.t line 0.
INIT failed--call queue aborted.
t/21read_DATA.t ........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_22read_DATA_2.1252
(And if that works, please file a bug report.)
at t/22read_DATA_2.t line 0.
INIT failed--call queue aborted.
t/22read_DATA_2.t ......................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/23validate.t ......................... ok
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_24prefix.176
(And if that works, please file a bug report.)
at t/24prefix.t line 15.
BEGIN failed--compilation aborted at t/24prefix.t line 26.
t/24prefix.t ...........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 14 (#1)
(W uninitialized) An undefined value was used as if it were already
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
To help you figure out what was undefined, perl will try to tell you
the name of the variable (if any) that was undefined. In some cases
it cannot do this, so it also tells you what operation you used the
undefined value in. Note, however, that perl optimizes your program
anid the operation displayed in the warning may not necessarily appear
literally in your program. For example, "that $foo" is usually
optimized into "that " . $foo, and the warning will refer to the
concatenation (.) operator, even though there is no . in
your program.
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto1.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto1.p line 19.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 22 (#1)
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto2.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto2.p line 19.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 30 (#1)
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto3.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto3.p line 19.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 38 (#1)
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto4.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto4.p line 19.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 46 (#1)
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto5.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto5.p line 19.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Use of uninitialized value $ret in concatenation (.) or string at t/25proto.t
line 54 (#1)
:
$@: Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_25proto.1692
(And if that works, please file a bug report.)
at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto6.p line 13.
BEGIN failed--compilation aborted at C:/strawberry163/cpan/build/Inline-C-0.79_001-0/t/proto6.p line 19.
t/25proto.t ............................
Failed 6/6 subtests
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
# Failed test 'bind was successful'
# at t/26fork.t line 21.
# got: 'Can't open C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_26fork.1332\config-MSWin32-x86-multi-thread-5.016003 for input.
#
# at t/26fork.t line 15.
# '
# expected: ''
# Failed test 'bound func no die()'
# at t/26fork.t line 23.
# got: 'Undefined subroutine &main::add called at t/26fork.t line 22.
# '
# expected: ''
# Failed test 'bound func gave right result'
# at t/26fork.t line 24.
# got: undef
# expected: '10'
# Looks like you failed 3 tests of 4.
t/26fork.t .............................
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/4 subtests
# Failed test 'make test'
# at t/27inline_maker.t line 61.
# cp lib/Boo/Far.pm blib\lib\Boo\Far.pm
# cp lib/Boo.pm blib\lib\Boo.pm
# cp lib/Boo/Far/data.txt blib\lib\Boo\Far\data.txt
# cp lib/Boo/Far/Faz.pm blib\lib\Boo\Far\Faz.pm
# "C:\strawberry163\perl\bin\perl.exe" -Mblib -MInline=NOISY,_INSTALL_ -MBoo::Far -e"my %A = (modinlname => 'Boo-Far.inl', module => 'Boo::Far'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 2.01 blib\arch
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Error. You have specified 'C' as an Inline programming language.
#
# I currently only know about the following languages:
# Foo, foo
#
# If you have installed a support module for this language, try deleting the
# config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
#
# C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\_Inline
#
# (And if that works, please file a bug report.)
#
# at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\blib\lib/Boo/Far.pm line 8.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\blib\lib/Boo/Far.pm line 14.
# Compilation failed in require.
# BEGIN failed--compilation aborted.
# dmake: Error code 255, while making 'Boo-Far.inl'
# Failed test 'make install'
# at t/27inline_maker.t line 61.
# "C:\strawberry163\perl\bin\perl.exe" -Mblib -MInline=NOISY,_INSTALL_ -MBoo::Far -e"my %A = (modinlname => 'Boo-Far.inl', module => 'Boo::Far'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 2.01 blib\arch
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Error. You have specified 'C' as an Inline programming language.
#
# I currently only know about the following languages:
# Foo, foo
#
# If you have installed a support module for this language, try deleting the
# config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
#
# C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\_Inline
#
# (And if that works, please file a bug report.)
#
# at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\blib\lib/Boo/Far.pm line 8.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\blib\lib/Boo/Far.pm line 14.
# Compilation failed in require.
# BEGIN failed--compilation aborted.
# dmake: Error code 255, while making 'Boo-Far.inl'
# Failed test 'make test'
# at t/27inline_maker.t line 61.
# cp Simple.pm blib\lib\Math\Simple.pm
# "C:\strawberry163\perl\bin\perl.exe" -Mblib -MInline=NOISY,_INSTALL_ -MMath::Simple -e"my %A = (modinlname => 'Math-Simple.inl', module => 'Math::Simple'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 1.23 blib\arch
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Error. You have specified 'C' as an Inline programming language.
#
# I currently only know about the following languages:
# Foo, foo
#
# If you have installed a support module for this language, try deleting the
# config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
#
# C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\_Inline
#
# (And if that works, please file a bug report.)
#
# at -e line 0.
# INIT failed--call queue aborted.
# dmake: Error code 255, while making 'Math-Simple.inl'
# Failed test 'make install'
# at t/27inline_maker.t line 61.
# "C:\strawberry163\perl\bin\perl.exe" -Mblib -MInline=NOISY,_INSTALL_ -MMath::Simple -e"my %A = (modinlname => 'Math-Simple.inl', module => 'Math::Simple'); my %S = (API => \%A); Inline::satisfy_makefile_dep(\%S);" 1.23 blib\arch
# Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
# BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
# Compilation failed in require at (eval 4) line 1.
# Error. You have specified 'C' as an Inline programming language.
#
# I currently only know about the following languages:
# Foo, foo
#
# If you have installed a support module for this language, try deleting the
# config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
#
# C:\strawberry163\cpan\build\Inline-C-0.79_001-0\_Inline_27inline_maker.1156\src dir\_Inline
#
# (And if that works, please file a bug report.)
#
# at -e line 0.
# INIT failed--call queue aborted.
# dmake: Error code 255, while making 'Math-Simple.inl'
# Looks like you failed 4 tests of 8.
t/27inline_maker.t .....................
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/8 subtests
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_28autowrap.428
(And if that works, please file a bug report.)
at t/28autowrap.t line 9.
BEGIN failed--compilation aborted at t/28autowrap.t line 9.
t/28autowrap.t .........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_30cppflags.1556
(And if that works, please file a bug report.)
at t/30cppflags.t line 20.
BEGIN failed--compilation aborted at t/30cppflags.t line 22.
t/30cppflags.t .........................
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_31include_dirs_angle_brackets.604
(And if that works, please file a bug report.)
at t/31include_dirs_angle_brackets.t line 20.
BEGIN failed--compilation aborted at t/31include_dirs_angle_brackets.t line 23.
t/31include_dirs_angle_brackets.t ......
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Expected:
[[[ BEGIN EXPECTED ERRORS ]]]
PURPOSEFUL COMPILER ERROR!
A problem was encountered while attempting to compile and install your Inline
C code. The command that failed was:
"make > out.make 2>&1" with error code 2
[[[ END EXPECTED ERRORS ]]]
Got:
[[[ BEGIN RECEIVED ERRORS ]]]
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_32include_dirs_double_quotes_bad.652
(And if that works, please file a bug report.)
at (eval 4) line 10.
BEGIN failed--compilation aborted at (eval 4) line 13.
[[[ END RECEIVED ERRORS ]]]
t/32include_dirs_double_quotes_bad.t ...
Failed 1/1 subtests
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Can't locate Win32/Mutex.pm in @INC (@INC contains: C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib/ C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/site/lib C:/strawberry163/perl/vendor/lib C:/strawberry163/perl/lib .) at C:/strawberry163/perl/lib/if.pm line 13.
BEGIN failed--compilation aborted at C:\strawberry163\cpan\build\Inline-C-0.79_001-0\blib\lib/Inline/C.pm line 13.
Compilation failed in require at (eval 4) line 1.
Uncaught exception from user code:
Error. You have specified 'C' as an Inline programming language.
I currently only know about the following languages:
Foo, foo
If you have installed a support module for this language, try deleting the
config-MSWin32-x86-multi-thread-5.016003 file from the following Inline DIRECTORY, and run again:
C:/strawberry163/cpan/build/Inline-C-0.79_001-0/_Inline_33include_dirs_double_quotes_good.784
(And if that works, please file a bug report.)
at t/33include_dirs_double_quotes_good.t line 20.
BEGIN failed--compilation aborted at t/33include_dirs_double_quotes_good.t line 23.
t/33include_dirs_double_quotes_good.t ..
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/author-pod-syntax.t .................. skipped: these tests are for testing by the author
t/parse-pegex.t ........................ ok
t/pegex-parser.t ....................... skipped: $ENV{PERL_INLINE_DEVELOPER_TEST} not set
Test Summary Report
-------------------
t/01syntax.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/02config.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/03typemap.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/04perlapi.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05xsmode.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/06parseregexp.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/07typemap_multi.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/08taint.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 10 tests but ran 1.
t/09parser.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/10callback.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/11default_readonly.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
t/14void_arg.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/14void_arg_PRD.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/15ccflags.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/16ccflagsex.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/17prehead.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/19INC.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/20eval.t (Wstat: 0 Tests: 5 Failed: 2)
Failed tests: 1, 5
t/21read_DATA.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/22read_DATA_2.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/24prefix.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/25proto.t (Wstat: 0 Tests: 6 Failed: 6)
Failed tests: 1-6
t/26fork.t (Wstat: 768 Tests: 4 Failed: 3)
Failed tests: 2-4
Non-zero exit status: 3
t/27inline_maker.t (Wstat: 1024 Tests: 8 Failed: 4)
Failed tests: 2-3, 6-7
Non-zero exit status: 4
t/28autowrap.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/30cppflags.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/31include_dirs_angle_brackets.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/32include_dirs_double_quotes_bad.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
t/33include_dirs_double_quotes_good.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/parse-pegex.t (Wstat: 0 Tests: 24 Failed: 0)
TODO passed: 4, 7-9
Files=35, Tests=71, 36 wallclock secs ( 0.15 usr + 0.10 sys = 0.25 CPU)
Result: FAIL
Failed 29/35 test programs. 16/71 subtests failed.
dmake.exe: Error code 255, while making 'test_dynamic'
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------------- -------- --------
ExtUtils::MakeMaker 7.00 7.34
File::Spec 0.8 3.40
Inline 0.79 0.80
Parse::RecDescent 1.967009 1.967009
Pegex 0.58 0.70
perl 5.010000 5.016003
Win32::Mutex 1.09 1.09
build_requires:
Module Need Have
----------------------- -------- --------
autodie 0 2.23
ExtUtils::MakeMaker 0 7.34
File::Copy::Recursive 0 0.38
File::Path 0 2.09
Test::More 0.88 1.001002
Test::Warn 0.23 0.24
version 0.77 0.9902
YAML::XS 0 0.76
configure_requires:
Module Need Have
----------------------- -------- --------
ExtUtils::MakeMaker 0 7.34
File::ShareDir::Install 0.06 0.08
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
NUMBER_OF_PROCESSORS = 1
PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\strawberry163\c\bin;C:\strawberry163\perl\site\bin;C:\strawberry163\perl\bin
PERL5LIB = C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/arch;C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/lib;C:\strawberry163\cpan\build\Pegex-0.70-0/blib/arch;C:\strawberry163\cpan\build\Pegex-0.70-0/blib/lib;C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/arch;C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/lib;C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch;C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib;C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/arch;C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 1568
PERL5_CPAN_IS_RUNNING = 1568
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 1664,1568
PERL_CR_SMOKER_CURRENT = Inline-C-0.79_001
PERL_CR_SMOKER_RUNONCE = 1
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 18 Model 1 Stepping 0, AuthenticAMD
TEMP = C:\DOCUME~1\c\LOCALS~1\Temp
TERM = dumb
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = C:\strawberry163\perl\bin\perl.exe
$UID/$EUID = 0 / 0
$GID = 0
$EGID = 0
Win32::GetOSName = WinXP/.Net
Win32::GetOSVersion = Service Pack 3, 5, 1, 2600, 2, 3, 0, 256, 1
Win32::FsType = NTFS
Win32::IsAdminUser = 1
Perl module toolchain versions installed:
Module Have
------------------- --------
CPAN 2.16
CPAN::Meta 2.143240
Cwd 3.40
ExtUtils::CBuilder 0.280206
ExtUtils::Command 7.34
ExtUtils::Install 2.06
ExtUtils::MakeMaker 7.34
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.24
File::Spec 3.40
JSON 2.90
JSON::PP 2.27203
Module::Build 0.4205
Module::Signature 0.70
Parse::CPAN::Meta 1.4414
Test::Harness 3.30
Test::More 1.001002
YAML 0.90
YAML::Syck 1.24
version 0.9902
--
Summary of my perl5 (revision 5 version 16 subversion 3) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname='Win32 strawberry-perl 5.16.3.1 #1 Tue Mar 12 13:55:20 2013 i386'
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags =' -s -O2 -DWIN32 -DPERL_TEXTMODE_SCRIPTS -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields',
optimize='-s -O2',
cppflags='-DWIN32'
ccversion='', gccversion='4.6.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='g++', ldflags ='-s -L"C:\strawberry163\perl\lib\CORE" -L"C:\strawberry163\c\lib"'
libpth=C:\strawberry163\c\lib C:\strawberry163\c\i686-w64-mingw32\lib
libs=-lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
perllibs=-lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
libc=, so=dll, useshrplib=true, libperl=libperl516.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-mdll -s -L"C:\strawberry163\perl\lib\CORE" -L"C:\strawberry163\c\lib"'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES HAVE_INTERP_INTERN MULTIPLICITY
PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_IMPLICIT_CONTEXT PERL_IMPLICIT_SYS
PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PL_OP_SLAB_ALLOC
USE_ITHREADS USE_LARGE_FILES USE_LOCALE
USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF
Built under MSWin32
Compiled at Mar 12 2013 14:01:07
%ENV:
PERL5LIB="C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/arch;C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/lib;C:\strawberry163\cpan\build\Pegex-0.70-0/blib/arch;C:\strawberry163\cpan\build\Pegex-0.70-0/blib/lib;C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/arch;C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/lib;C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch;C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib;C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/arch;C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/lib"
PERL5_CPANPLUS_IS_RUNNING="1568"
PERL5_CPAN_IS_RUNNING="1568"
PERL5_CPAN_IS_RUNNING_IN_RECURSION="1664,1568"
PERL_CR_SMOKER_CURRENT="Inline-C-0.79_001"
PERL_CR_SMOKER_RUNONCE="1"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/arch
C:\strawberry163\cpan\build\Win32-IPC-1.11-0/blib/lib
C:\strawberry163\cpan\build\Pegex-0.70-0/blib/arch
C:\strawberry163\cpan\build\Pegex-0.70-0/blib/lib
C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/arch
C:\strawberry163\cpan\build\YAML-LibYAML-0.76-0/blib/lib
C:\strawberry163\cpan\build\Inline-0.80-0/blib/arch
C:\strawberry163\cpan\build\Inline-0.80-0/blib/lib
C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/arch
C:\strawberry163\cpan\build\ExtUtils-MakeMaker-7.34-0/blib/lib
C:/strawberry163/perl/site/lib
C:/strawberry163/perl/vendor/lib
C:/strawberry163/perl/lib
.