Back
From: metabase:user:322078bc-2aae-11df-837a-5e0a49663a4f
Subject: FAIL R-Setup-0.01 v5.20.2 SunOS/Solaris
Date: 2015-12-19T16:16:18Z
This distribution has been tested as part of the CPAN Testers
project, supporting the Perl programming language. See
http://wiki.cpantesters.org/ for more information or email
questions to cpan-testers-discuss@perl.org
--
Dear SNEHASIS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.9156. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
PERL_DL_NONLAZY=1 "/export/home/cpan/pit/bare/perl-5.20.2/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/R-Setup-Bootstrap.t .. ok
# Failed test 'use R::Setup::Download;'
# at t/R-Setup-Download.t line 9.
# Tried to use 'R::Setup::Download'.
# Error: Can't locate LWP/UserAgent.pm in @INC (you may need to install the LWP::UserAgent module) (@INC contains: /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2 .) at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Download.pm line 17.
# BEGIN failed--compilation aborted at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Download.pm line 17.
# Compilation failed in require at t/R-Setup-Download.t line 9.
# BEGIN failed--compilation aborted at t/R-Setup-Download.t line 9.
# Looks like you failed 1 test of 1.
t/R-Setup-Download.t ...
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/R-Setup-Install.t .... ok
# Failed test 'use R::Setup::Local;'
# at t/R-Setup-Local.t line 9.
# Tried to use 'R::Setup::Local'.
# Error: Can't locate LWP/UserAgent.pm in @INC (you may need to install the LWP::UserAgent module) (@INC contains: /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2 .) at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Local.pm line 14.
# BEGIN failed--compilation aborted at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Local.pm line 14.
# Compilation failed in require at t/R-Setup-Local.t line 9.
# BEGIN failed--compilation aborted at t/R-Setup-Local.t line 9.
# Looks like you failed 1 test of 1.
t/R-Setup-Local.t ......
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/R-Setup-Resolve.t .... ok
# Failed test 'use R::Setup;'
# at t/R-Setup.t line 9.
# Tried to use 'R::Setup'.
# Error: Can't locate LWP/UserAgent.pm in @INC (you may need to install the LWP::UserAgent module) (@INC contains: /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2/i86pc-solaris-64 /export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2 .) at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Download.pm line 17.
# BEGIN failed--compilation aborted at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup/Download.pm line 17.
# Compilation failed in require at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup.pm line 14.
# BEGIN failed--compilation aborted at /export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib/R/Setup.pm line 14.
# Compilation failed in require at t/R-Setup.t line 9.
# BEGIN failed--compilation aborted at t/R-Setup.t line 9.
# Looks like you failed 1 test of 1.
t/R-Setup.t ............
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/R-Setup-Download.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/R-Setup-Local.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/R-Setup.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=6, Tests=6, 1 wallclock secs ( 0.02 usr 0.02 sys + 0.09 cusr 0.02 csys = 0.15 CPU)
Result: FAIL
Failed 3/6 test programs. 3/6 subtests failed.
*** Error code 1
make: Fatal error: Command failed for target `test_dynamic'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
LWP::UserAgent
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SNEHASIS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'LWP::UserAgent' => '0', # or a minimum working version
}
);
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
ExtUtils::MakeMaker 7.10 0
Perl module toolchain versions installed:
Module Name Have
CPANPLUS 0.9156
CPANPLUS::Dist::Build 0.78
Cwd 3.60
ExtUtils::CBuilder 0.280224
ExtUtils::Command 7.10
ExtUtils::Install 2.04
ExtUtils::MakeMaker 7.10
ExtUtils::Manifest 1.70
ExtUtils::ParseXS 3.30
File::Spec 3.60
Module::Build 0.4214
Pod::Parser 1.62
Pod::Simple 3.28
Test::Harness 3.35
Test::More 1.001014
version 0.9912
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.94.
Powered by minismokebox version 0.58
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LC_ALL =
LC_COLLATE =
LC_CTYPE =
LC_MESSAGES =
LC_MONETARY =
LC_NUMERIC =
LC_TIME =
NONINTERACTIVE_TESTING = 1
PATH = /opt/solarisstudio12.3/bin:/opt/solarisstudio12.3/bin:/usr/bin:/usr/sbin
PERL5LIB = :/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib:/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch
PERL5_CPANPLUS_IS_RUNNING = 15760
PERL5_CPANPLUS_IS_VERSION = 0.9156
PERL5_MINISMOKEBOX = 0.58
PERL5_YACSMOKE_BASE = /export/home/cpan/pit/bare/conf/perl-5.20.2
PERL_EXTUTILS_AUTOINSTALL = --defaultdeps
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/cpan/pit/bare/perl-5.20.2/bin/perl
UID: $< = 101
EUID: $> = 101
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 20 subversion 2) configuration:
Platform:
osname=solaris, osvers=2.11, archname=i86pc-solaris-64
uname='sunos soflyn 5.11 11.2 i86pc i386 i86pc '
config_args='-des -Dprefix=/export/home/cpan/pit/bare/perl-5.20.2 -Duse64bitall'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='/opt/solarisstudio12.3/bin/cc', ccflags ='-m64 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-m64'
ccversion='Sun C 5.12 SunOS_i386 2011/11/16', gccversion='', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='/opt/solarisstudio12.3/bin/cc', ldflags =' -m64 -L/opt/solarisstudio12.3/prod/lib/amd64 -L/lib/64 -L/usr/gnu/lib '
libpth=/opt/solarisstudio12.3/prod/lib/amd64 /lib/64 /usr/gnu/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -lgdbm -ldb -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-KPIC', lddlflags=' -G -m64 -L/opt/solarisstudio12.3/prod/lib/amd64 -L/lib/64 -L/usr/gnu/lib'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD PERL_MALLOC_WRAP
PERL_NEW_COPY_ON_WRITE PERL_PRESERVE_IVUV
PERL_USE_SAFE_PUTENV USE_64_BIT_ALL USE_64_BIT_INT
USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE
USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO
USE_PERL_ATOF
Locally applied patches:
Devel::PatchPerl 1.34
Built under solaris
Compiled at Jun 16 2015 14:15:15
%ENV:
PERL5LIB=":/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib:/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch"
PERL5_CPANPLUS_IS_RUNNING="15760"
PERL5_CPANPLUS_IS_VERSION="0.9156"
PERL5_MINISMOKEBOX="0.58"
PERL5_YACSMOKE_BASE="/export/home/cpan/pit/bare/conf/perl-5.20.2"
PERL_EXTUTILS_AUTOINSTALL="--defaultdeps"
PERL_MM_USE_DEFAULT="1"
@INC:
/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/lib
/export/home/cpan/pit/bare/conf/perl-5.20.2/.cpanplus/5.20.2/build/d3JImbJe_i/R-Setup-0.01/blib/arch
/export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2/i86pc-solaris-64
/export/home/cpan/pit/bare/perl-5.20.2/lib/site_perl/5.20.2
/export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2/i86pc-solaris-64
/export/home/cpan/pit/bare/perl-5.20.2/lib/5.20.2
.